Dukane Data Video Projector Models 8104wb/8105b/8106b Users Manual

DUKANE CORP AV SERVICE DEPT 
2900 Dukane Drive
St Charles, IL 60174
800-676-2487 / 630-762-4032 
Fax  630-584-5156
[email protected]  
www.dukane.com/av
Information in this Guide may change due to product improvements. To obtain the latest 
manuals, literature, and software please visit the Dukane web site at;  \
www.dukane.com/av  
and look at the specific model SUPPORT or DOWNLOADS section.
Data Video Projector
User’s Manual (Concise)
MODELS 8104WB/8105B/8106B
430-8104WB-8105B-8106B-Concise-00 

1
ENGLISH
Projector
CP-A222WN/8105B, CP-A302WN/8106B, CP-AW252WN/8104WB
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to u\
se safely 
and utilize well the product.
WARNING  ►Before using this product, be sure to read all manuals for this 
product. See the “Using the CD manual”  (
 19)
 to read the manuals in the CD. 
After reading them, store them in a safe place for future reference.
►Heed all the warnings and...

2
First of  all
Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and\
 the 
product as follows, for safety purpose. Please know their meanings befor\
ehand, 
and heed them.
Important safety instruction
The followings are important instructions for safely using the product. \
Be sure to 
follow them always when handling the product. The manufacturer assumes no 
responsibility for any damage caused by mishandling that is beyond norma\
l usage...

3
ENGLISH
Regulator y notices
About Electro-Magnetic InterferenceIn CANADA
This Class B digital apparatus complies with Canadian ICES-003.
In the US, and other places where the FCC regulations are applicable
Declaration of Conformity Trade name  HITACHI/Dukane
Model Number   CP-A222WN/8105B, CP-A302WN/8106B, CP-AW252WN/8104WB
Responsible Party  Hitachi America, Ltd.
Address  900 Hitachi way, Chula Vista, CA 91914-3556  U.S.A.
Telephone Number  +1 -800-448-2244
This device complies with part 15 of the FCC...

4
Contents of  package
Your projector should come with the items 
shown below. Check that all the items are 
included. Require of your dealer immediately if 
any items are missing.
(1) Remote control with the two AA batteries 
(2) Power cord 
(3) Computer cable
(4)  Parts of cable cover
(5)  User’s manuals (Book x1, CD x1)
(6) Security label
(7) Application  CD
(8) Wall mount unit and User's manual *
(9) Adapter 
cover
* C
NOTE

  • Keep the original packing materials for future reshipment. Be sur\
e...

5
ENGLISH
WARNING  ►Install the projector in a stable horizontal position.
►Place the projector in a cool place, and ensure that there is suffi\
cient ventilation. 
Keep a space of 30 cm or more between the sides of the projector and oth\
er objects 
such as walls. Do not place or attach anything that would block the lens\
 or vent 
holes. Do not place the projector where the air from an air conditioner \
or similar unit 
will blow on it directly.
►Do not place the projector anyplace where it may get...

6
Connecting with your devices
Be sure to read the manuals for devices before connecting them to the pr\
ojector. 
Make sure that all the devices are suitable to be connected with this pr\
oduct, and 
prepare the cables required to connect. Refer to figures F-3 to F-5 at the back of 
this manual. 
For details, please see “User's Manual” - “Operating Guide” \
and “Network Guide”. 
(  19, 21)
• When AUTO is selected for the COMPUTER IN1 or COMPUTER IN2 port in 
COMPUTER IN of the INPUT menu, that port...

7
ENGLISH
NOTE  • If a loud feedback noise is produced from the speaker, move the 
microphone away from the speaker.
• This projector doesn't support plug-in power for the microphone.
• 
The COMPUTER IN1/2 port can support a component signal also. The specific 
adapter or the specific cable is required for a component video input \
to the projector.
Connecting with your devices (continued)
NOTICE   ►Use the cables with straight plugs, not L-shaped ones, as the inpu\
t 
ports of the projector are...

8
Connecting power supply
1. Put the connector of the power cord into the 
AC IN (AC inlet) of the projector.
2. Firmly plug the power cord’s plug into the 
outlet.  In a couple of seconds after the power 
supply connection, the  POWER indicator will 
light up in steady orange.
Please remember that when the DIRECT POWER ON  
function activated, the connection of the power supply make the projecto\
r turn on.
WARNING  ►Please use extra caution when connecting the power cord, as 
incorrect or faulty...