Dukane 8776 Projector User Manual
Have a look at the manual Dukane 8776 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Dukane manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
39 SCREEN Menu ItemDescription MESSAGE Using the buttons ▲/▼ turns on/off the message function. TURN ON ó TURN OFF When the TURN ON is selected, the following message function works.“AUTO IN PROGRESS” while automatically adjusting”NO INPUT IS DETECTED””SYNC IS OUT OF RANGE”"Searching….” while searching for the input”Detecting….” while an input signal is detectedThe indication of the input signal displayed by changing The indication of the aspect ration displayed by changingThe indication of the My Memory displayed by changing The indication of the Picture Mode displayed by changingThe indication of "FREEZE" and "II" while freezing the screen by pressing the FREEZE button.• When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (22). SOURCE NAME Each input port for this projector can have a name applied to it.(1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu will be displayed. (2) Use the ▲/▼ buttons on the SCREEN NAME menu to select the port to be named and press the ► button. The SOURCE NAME dialog will be displayed. (3) The current name will be displayed on the first line. Use the ◄/►/▲/▼ and ENTER or INPUT buttons to select and enter characters. The RESET button can be used to erase character at a time. The name can be a maximum of 6 characters. (4) To change an already inserted character, press the ▲ button while the cursor is on the [A-N] row to move the cursor to the name displayed on the first line and use the ◄/► buttons to select character to be changed. Once a character in the name is selected use the ▼ button to move the cursor back down to the character entry area to select and enter characters as described above. (5) Select and press the ENTER or INPUT buttons when finished entering text.To revert to the previous name without saving changes press the ESC or ◄ button and the INPUT button simultaneously. SCREEN Menu (continued) 0#/ 4)$4)$#$%&()*+,-./0123456789:;
40 OPTION Menu OPTION Menu ItemDescription AUTO SEARCH Using the buttons ▲/▼ turns on/off the automatic signal search function. TURN ON ó TURN OFF When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order. The search is started from the current port. Then when an input is found, the projector will stop searching and display the image. RGB IN ð RGB IN ð COMPONENT VIDEO ð S-VIDEO ð VIDEO AUTO KEYSTONE Using the buttons ▲/▼ turns on/off the automatic keystone function. TURN ON ó TURN OFF TURN ON : Automatic keystone distortion correction will be executed whenever changing the slant of the projector. TURN OFF : This function is disabled. Please execute the AUTO KEYSTONE EXECUTE in the SETUP Menu for automatic keystone distortion correction. When the projector is suspended from the ceiling this feature will not function properly so select TURN OFF.This function will be unavailable when Transition Detector is on (48). AUTO ON Using the buttons ▲/▼ turns on/off the AUTO ON function. TURN ON ó TURN OFF When set to TURN ON, the lamp will only be automatically turned on when the Power switch is turned on after the power was turned off by Power switch last time. The lamp will not be automatically turned on when the Power switch is turned on if the lamp was turned off with the following procedures.• The lamp was turned off with a remote control, projector button, or power turn off command.• The lamp was turned off with an AUTO OFF function (41).• The lamp was turned on by an AUTO ON function and was turned off about 30 minutes after no signal had been detected.When no input is detected after the power on and AUTO OFF time is set to 0, the projector will be turned off after about 30 minutes passed.When no input is detected after the power on and AUTO OFF time is set to to 99, the projector will be turned off after the passed time reaches at the set time.If one of the projector's buttons or the remote control buttons is press\ ed or one of the commands (except get commands) is transmitted from the control port during the corresponding time, projector will not be turned\ off. With the OPTION menu, the items shown in the table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it referring to the following table. /07=4)$? 2+%674 5.%6 +/#)5672 +0276 126+10#5;/07 5%40 #7611((OKP.#/26+/J(+.646+/J #7615#4%*67401((#761-;561067401((#7611067401(( /;$76610548+%5%74+6;
4 ItemDescription AUTO OFF Using the buttons ▲/▼ adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) AUTO OFFENABLE AUTO OFFDISABLE0 When the time is set to 0, the projector is not turned off automatically.When the time is set to to 99, and when the passed time with no-signal or an unsuitable signal reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote control buttons is pressed or one of the commands (except get commands) is transmitted from the control port during the corresponding time, projector will not be turned off.Please refer to the section “Turning off the power” (17). LAMP TIME The lamp time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the lamp.Pressing the RESET button on the remote control or the button ► of the projector displays a dialog. To reset the lamp time, select the RESET using the button ▲. RESET CANCEL • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.• For the lamp replacement, see the section "Lamp" (50, 51). FILTER TIME The filter time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the air filter.Pressing the RESET button on the remote control or the button ► of the projector displays a dialog. To reset the filter time, select the RESET using the button ▲. RESET CANCEL • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter.• For the air filter cleaning, see the section "Air filter" (52, 53). MY BUTTON Sets the assigned function for the MY BUTTON and buttons on the included remote control.• RGB : Sets port to RGB .• RGB : Sets port to RGB .• COMPONENT: Sets port to COMPONENT.• S-VIDEO: Sets port to S-VIDEO.• VIDEO: Sets port to VIDEO.• INFORMATION: Displays INPUT INFORMATION (43).• AUTO KEYSTONE EXECUTE: Performs automatic KEYSTONE correction (35).• MY MEMORY: Loads MY MEMORY settings (29).• PICTURE MODE: Changes the PICTURE mode (25).• FILTER RESET: Displays the filter time reset confirmation dialogue (41). OPTION Menu OPTION Menu (continued)
4 ItemDescription SERVICE Selecting this item displays the SERVICE menu.Select an item using the buttons ▲/▼, and press the button ► or the ENTER button on the remote control to execute the item. FAN SPEED ó AUTO ADJUST ó GHOST ó FILTER MESSAGE ó KEY LOCK FACTORY RESET ó INFORMATION ó REMOTE FREQ. FAN SPEEDUsing the buttons ▲/▼ switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected. HIGH ó NORMAL AUTO ADJUSTUsing the buttons ▲/▼ enables/disables the automatic adjustment.When DISABLE is selected, the automatic adjustment feature is disabled, although rough adjustment is automatically performed depending on the basic setting. ENABLE ó DISABLE • Depending on conditions, such as input image, signal cable to the projector, environment around the projector, etc., the automatic adjustment may not work correctly. In such a case, please choose DISABLE to disable the automatic adjustment, and make adjustment manually. GHOST1. Select a color element of ghost using the buttons ◄/►. . Adjust the selected element using the buttons ▲/▼ to disappear ghost. FILTER MESSAGEUse the ▲/▼ button to set the timer for the interval to show the message for cleaning up the air filter. 50h ó 00h ó 00h ó 300h ó TURN OFFAfter selecting “50h”, “ 00h”, “ 00h”, or “300h”, the message “REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK” will appear after the timer reaches the interval time set by the menu. (55) When the “TURN OFF” is chosen, the air filter cleaning message will not appear.• Please check and clean the air filter periodically, even if there is no message. If the air filter becomes to be blocked by dust or others, the internal temperature will rise, which could cause malfunction, or reduce the lifetime of the projector.• It is recommended to choose “ 00h” in general. Please be careful with the operating environment of the projector and the condition of the air filter, especially when the “200h”, “300h” or “TURN OFF” is chosen. KEY LOCKUsing the buttons ▲/▼ turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except the STANDBY/ON button are locked.TURN ON ó TURN OFF• Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control. OPTION Menu (continued) OPTION Menu
43 ItemDescription SERVICE REMOTE FREQ.Use the ▲/▼ button to change the Projector's remote sensor setting (16). :NORMAL ó :HIGH Items with a checkmark are on. The factory default setting is for both :NORMAL and :HIGH to be on. If the remote control does not function correctly set the this to either only or only as described in Remote Control Settings (16).Neither can be turned off at the same time. INFORMATIONSelecting this item displays a dialog titled “INPUT INFORMATION”. It shows the information about the current input. INPUT-INFORMATIONRGB04x768 @60HzFRAME LOCK INPUT-INFORMATIONS-VIDEOSECAMAUTO INPUT-INFORMATIONCOMPONENT576i @50SCART RGB • The “FRAME LOCK” message on the dialog means the frame lock function is working. • The “SCART RGB” message means the COMPONENT VIDEO port is working as a SCART RGB input port. Please refer to the COMPONENT item in this menu. (33) • This item can't be selected for no signal and sync out. FACTORY RESETSelecting RESET using the button ▲ performs this function. By this function, all the items in all of menus will collectively return to\ the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE and OPTION_SECURITY are not reset. RESET CANCEL OPTION Menu (continued) OPTION Menu
44 ItemDescription SECURITY This projector is equipped with security functions.User registration is required before using the security functions.Please contact your local dealer. 1. Using Security Features 1.1 Inputting the PASSWORD 1.1-1 Use the ▲/▼ buttons on the OPTION menu to select SECURITY and press the ► button. The ENTER PASSWORD box will be displayed. The factory default PASSWORD is 3046. This PASSWORD can be changed ( . Changing the PASSWORD). NOTE : It is strongly recommended the factory default PASSWORD to be changed as soon as possible. 1.1-2 Use the ▲/▼/◄/► buttons to enter the registered PASSWORD. Move the cursor to the right side of the ENTER PASSWORD BOX and press the ► button to display the SECURITY menu. If an incorrect PASSWORD is input the ENTER PASSWORD BOX will be displayed again. If incorrect PASSWORD is input 3 times the projector will turn off. Afterwards the projector will turn off every time an incorrect PASSWORD is input. 1.2 Changing the PASSWORD 1.2-1 Use the ▲/▼ buttons on the SECURITY menu to select SECURITY PASSWORD CHANGE and press the ► button to display the ENTER NEW PASSWORD BOX. 1.2-2 Use the ▲/▼/◄/► buttons to enter the new PASSWORD. . -3 Move the cursor to the right side of the ENTER NEW PASSWORD BOX and press the ► button to display the NEW PASSWORD AGAIN BOX, enter the same PASSWORD again. . -4 Move the cursor to the right side of the NEW PASSWORD AGAIN BOX and press the ► button and the NOTE NEW PASSWORD BOX will be displayed for about 0 seconds, please make note of the PASSWORD during this time. Pressing the ENTER button on the remote controll or INPUT button on the projector will close the NOTE NEW PASSWORD BOX. NOTE : Please do not forget your PASSWORD. OPTION Menu (continued) OPTION Menu 5%74+6;0642#55914& 0:6 37+6 ENTER PASSWORD BOX 5%74+6; 5%74+6;2#55914&%*#0)/[5ETGGP2#55914&67401((2+0.1%-67401((64#05+6+10&6%61467401(( SECURITY MENU 5%74+6;064092#55914& 0:6 37+6ENTER NEW PASSWORD BOX 5%74+6;092#55914&#)#+0 1- %#0%.NEW PASSWORD AGAIN BOX 5%74+6;016092#55914& :+6 064NOTE NEW PASSWORD BOX
45 ItemDescription SECURITY 1.3 If you have forgotten your PASSWORD .3- Follow the procedure in . - to display the ENTER PASSWORD BOX. .3- While the ENTER PASSWORD BOX is displayed, press and hold the RESET button on the remote control for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds.The 0 digit Inquiring Code will be displayed. NOTE: If there is no key input for about 55 seconds while the Inquiring Code is displayed the menu will close. If necessary repeat the process from .3- . .3-3 Contact your dealer with the 0 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 2. Using the MyScreen PASSWORD Function The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. 2.1 Turning on the MyScreen PASSWORD Function 2.1-1 Use the ▲/▼ buttons on the SECURITY menu to select MyScreen PASSWORD and press the ► button to display the MyScreen PASSWORD on/off menu. 2.2 Setting the PASSWORD . - Display the MyScreen on/off menu using the procedure in . - . 2.2-2 Use the ▲/▼ buttons on the MyScreen PASSWORD on/off menu to select TURN ON.The ENTER PASSWORD BOX (small) will be displayed. 2.2-3 Use the ▲/▼/◄/► buttons to enter the PASSWORD. Move the cursor to the right side of the ENTER PASSWORD BOX (small) and press the ► button to display the CHECK PASSWORD BOX, enter the same PASSWORD again. 5%74+6;2#55914& +PSWKTKPI%QFG OPTION Menu (continued) OPTION Menu /[5ETGGP0642#55914& 0:6 37+6 Inquiring Code (PASSWORD) /[5ETGGP%*%-2#55914& 0:6 37+6CHECK PASSWORD BOX /[5ETGGP2#55914& 67401067401(( MyScreen PASSWORD on/off menu ENTER PASSWORD BOX (small)
46 ItemDescription SECURITY . -4 Move the cursor to the right side of the CHECK PASSWORD BOX and press the ► button to display the PASSWORD for about 0 seconds, please make note of the PASSWORD during this time. After the PASSWORD has displayed for about 0 seconds the screen will return to the MyScreen PASSWORD on/off menu.Pressing the ENTER button on the remote control or INPUT button on the projector will close the PASSWORD box.When a PASSWORD is set for MyScreen: • The MyScreen registration function (and menu) will be unavailable. • The START UP setting will be locked on MyScreen (and the menu will be unavailable).Turning the MyScreen PASSWORD off will allow normal operation of both functions. NOTE : Please do not forget your MyScreen PASSWORD. 2.3 Turning the PASSWORD off .3- Follow the procedure in . - to display the MyScreen PASSWORD on/off menu. .3- Select TURN OFF to display the ENTER PASSWORD BOX (large). Enter the registered PASSWORD and the screen will return to the MyScreen on/off menu. If an incorrect PASSWORD is input the menu will close. If necessary repeat the process from .3- . 2.4 If you have forgotten your PASSWORD .4- Follow the procedure in . - to display the MyScreen PASSWORD on/off menu. .4- Select TURN OFF to display the ENTER PASSWORD BOX (large). The 0 digit Inquiring Code will be displayed inside the BOX. .4-3 Contact your dealer with the 0 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 3. Using the PIN LOCK FunctionPIN LOCK is a function which prevents the projector from being used unle\ ss a registered Code is input.3.1 Registering the PIN Code 3.1-1 Use the ▲/▼ buttons on the SECURITY menu to select PIN LOCK and press the ► button or the ENTER button to display the PIN LOCK on/off menu. 3.1-2 Use the ▲/▼ buttons on the PIN LOCK on/off menu to select TURN ON and the PIN BOX will be displayed. 0:637+6 +PSWKTKPI%QFG /[5ETGGP0642#55914& OPTION Menu (continued) OPTION Menu /[5ETGGP%1/2.6 :+6 064 ENTER PASSWORD BOX (large) PASSWORD BOX 2+0.1%- 67401067401(( PIN LOCK on/off menu
47 ItemDescription SECURITY 3.1-3 Input a 4 part PIN Code using the ▲/▼/◄/►/RGB and INPUT buttons.A CONFIRMATION BOX will appear. Reenter the same PIN Code. This will complete the PIN Code registration.NOTE: If there is no key input for about 55 seconds while the PIN BOX or the CONFIRMATION BOX are displayed the menu will close. If necessary repeat the process from 3. - .Afterwards, anytime the projector is restarted after the power switch is turned off the PIN BOX will be displayed. Enter the registered PIN Code.The projector can be used after entering the registered PIN Code. If an incorrect PIN Code is input the PIN BOX will be displayed again.If an incorrect PIN Code is input 3 times the projector will turn off. Afterwards the projector will turn off every time an incorrect PIN Code is input. The projector will also turn off if there is no key input for about 5 minutes while the PIN BOX is displayed.This function will activate only when the projector is started after the\ power switch was turned off. NOTE : Please do not forget your PIN Code. 3.2 Turning Off the PIN LOCK Function 3. - Follow the procedure in 3. - to display the PIN LOCK on/off menu. Use the ▲/▼ buttons to select TURN OFF and the PIN BOX will be displayed.Enter the registered PIN Code to turn the PIN LOCK function off.If an incorrect PASSWORD is entered the menu will close. 3.3 If you have forgotten your PIN Code 3.3- While the PIN BOX is displayed, press and hold the RESET button for three seconds or press and hold the INPUT and ► buttons for three seconds. The 0 digit Inquiring Code will be displayed. NOTE: If there is no key input for about 5 minutes while the Inquiring Code is displayed the projector will turn off. 3.3- Contact your dealer with the 0 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. OPTION Menu (continued) OPTION Menu PIN BOX 2+0$1: 4)$ +PRWV2+0%QFG CONFIRMATION BOX(PIN BOX) 2+0$1: 4)$ %QPHKTOCVKQP 2+0$1: +PSWKTKPI%QFG Inquiring Code (PIN Code)
48 ItemDescription SECURITY 4. Using the Transition Detector Function While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below.• Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed.• Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.• Keystone adjustment feature has been prohibited as long as the Transition Detector function is ON. 4.1 Turning On the Transition Detector Function 4. - Use the ▲/▼ buttons on the SECURITY menu to select Transition Detector and press the ► or the ENTER button to display the Transition Detector on/off menu. Select TURN ON and the current angle, mirror and keystone setting will be recorded.NOTE: This feature may not function properly if the projector is not in a stable position when TURN ON is selected. 4. - If this function is set to TURN ON when the vertical angle of the projector, mirror or keystone setting at which the projector is turned on is different than the previously recorded the Transition Detector Alarm will be displayed and the projector will not display the input signal.Either set the Transition Detector off in the SECURITY menu or set the projector at the recorded angle, mirror and keystone setting to display the input sig\ nal.If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after the\ power switch was turned off. 4.2 Setting the Transition Detector PASSWORD 4. - Use the ▲/▼ buttons on the SECURITY menu to select Transition Detector and press the ► or the ENTER button to display the Transition Detector on/off menu. 4. - Use the ▲/▼ buttons on the Transition Detector on/off menu to select TURN ON. The ENTER PASSWORD BOX (small) will be displayed. 4. -3 Use the ▲/▼/◄/► buttons to enter a PASSWORD. Move the cursor to the right side of the ENTER PASSWORD BOX (small) and press the ► button to display the CHECK PASSWORD BOX, enter the same PASSWORD again. 4. -4 Move the cursor to the right side of the CHECK PASSWORD BOX and press the ► button to display the PASSWORD for about 0 seconds, please make note of the PASSWORD during this time. After the PASSWORD has displayed for about 0 seconds the screen will return to the Transition Detector on/off menu.Pressing the ENTER button on the remote controll or the INPUT button on the projector will close the PASSWORD BOX. NOTE : Please do not forget your Transition Detector PASSWORD. OPTION Menu (continued) OPTION Menu 6TCPUKVKQP&GVGEVQT 67401067401(( Transition Detector on/off menu Transition Detector Alarm 2+0$1: 64#05+6+10&6%61410 6JGRTQLGEVQTJCUDGGPVTCPUHGTTGFHTQORTGXKQWUN[KPUVCNNGFRQUKVKQP+H[QWYKUJVQJCXGCUSWCTGKOCIGQPUETGGPCICKPFKUCDNG6TCPUKVKQP&GVGEVQTQP/GPW 6TCPUKVKQP&GVGEVQT0642#55914& 0:6 37+6ENTER PASSWORD BOX (small)6TCPUKVKQP&GVGEVQT%*%-2#55914& 0:6 37+6CHECK PASSWORD BOX6TCPUKVKQP&GVGEVQT%1/2.6 :+6 064PASSWORD BOX