Dream Vision Yunzi 3 User Manual
Have a look at the manual Dream Vision Yunzi 3 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 49 Dream Vision manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 37
14.0 MAINTENANCE
R699820 - Yunzi Series User Manual 37
Video source is Cinemascope: set [Anamo]rphic to Mode A
Select Anamorphic mode A for this input in the menu Input “Installation ⇒⇒ ⇒ ⇒
Anamorphic ⇒⇒ ⇒ ⇒
Mode A”.
[Anamo]rphic modes
When you press sequentially the [Anamo]rphic button, you change the mode from OFF, Mode A and Mode B.
•Mode A is intended to be used with an anamorphic lens to watch 2.35:1 content on a 2.35:1 screen.
•Mode B is intended to be used to quickly switch to 16:9 content...](http://img.usermanuals.tech/thumb/1594/88024/w64_dreamvision-yunzi-3-manual_d-36.png "Page 37
14.0 MAINTENANCE
R699820 - Yunzi Series User Manual 37
Video source is Cinemascope: set [Anamo]rphic to Mode A
Select Anamorphic mode A for this input in the menu Input “Installation ⇒⇒ ⇒ ⇒
Anamorphic ⇒⇒ ⇒ ⇒
Mode A”.
[Anamo]rphic modes
When you press sequentially the [Anamo]rphic button, you change the mode from OFF, Mode A and Mode B.
•Mode A is intended to be used with an anamorphic lens to watch 2.35:1 content on a 2.35:1 screen.
•Mode B is intended to be used to quickly switch to 16:9 content...")
![Page 39
14.0 MAINTENANCE
R699820 - Yunzi Series User Manual 39
a) Turn On the unit.
b) Browse into the menu Function => Reset Lamp Time.
c) Confirm time reset.
Alternative method in standby mode, using the remote control.
a) Plug this unit to Main power.
b) When the projector is in standby mode (red STANDBY/ON led), use the remote control and press sequentially
the [BACK] - [OK] - [HIDE] within 1 second interval then [DOWN] for at least 2 seconds.
c) The sequence is successful if the STANDBY/ON and LAMP leds...](http://img.usermanuals.tech/thumb/1594/88024/w64_dreamvision-yunzi-3-manual_d-38.png "Page 39
14.0 MAINTENANCE
R699820 - Yunzi Series User Manual 39
a) Turn On the unit.
b) Browse into the menu Function => Reset Lamp Time.
c) Confirm time reset.
Alternative method in standby mode, using the remote control.
a) Plug this unit to Main power.
b) When the projector is in standby mode (red STANDBY/ON led), use the remote control and press sequentially
the [BACK] - [OK] - [HIDE] within 1 second interval then [DOWN] for at least 2 seconds.
c) The sequence is successful if the STANDBY/ON and LAMP leds...")
15.0 MISCELLANEOUS R699820 - Yunzi Series User Manual 41 RS-232C pin assignation Command Format When sending a command to this unit, use the following data format: Available Operating commands Baud Rate 19200 bps Data Format Binary Mode Asynchronous Character Length 8 bits Parity None Start Bit 1 bit set to high Stop Bit 1 bit set to low X on/off None Flow Control None PinSignalFunctionSignal Direction 2RxDreceive dataPC -> Projector 3TxDtransmit dataProjector-> PC 5GNDground- 1,4,6-9N/C-- HeaderUnit IDCommandDataEoD 1 byte89h 01h2 bytesat least 1 byte0Ah Header(21h): Operating command. PC -> Projector (3Fh): Reference command. PC -> Projector (40h): Response command. Projector -> PC (06h): ACK. Projector -> PC Unit IDFixed to (89 h 01h) Command2 bytes. See the list of the available commands below. If Command code is “52h 43h”, the Data sent may also be sent to the projector by a programmable RCU using NEC 5 protocole. DataData lenght may vary EoDFixed to (0Ah) Header (21h)CommandDataDescription Connection RS-23200h 00hnoneCheck the serial connection Power ON50h 57h31hIf the projector is in stand-by mode, this command switch the unit ON. Power OFF50h 57h 30hIf the projector is powered ON, this command switches this unit into Stand-by Mode. Switch Input49h 50h32hSwitch active input to Component 33hSwitch active input to VGA 36hSwitch active input to HDMI 1 37hSwitch active input to HDMI 2 2BhSwitch to next input 2DhSwitch to previous input Gamma47h 54h30hSet Gamma to Normal 31hSet Gamma to A 1 65 9
15.0 MISCELLANEOUS 42 R699820 - Yunzi Series User Manual RCU Commands and sending them through RS-232 Gamma47h 54h32hSet Gamma to B 33hSet Gamma to C 37hSet Gamma to D 38hSet Gamma to E 39hSet Gamma to F 45hSet Gamma to G 46hSet Gamma to H 34hSet Gamma to Custom1 35hSet Gamma to Custom2 36hSet Gamma to Custom3 41hSet Gamma to Film1 42hSet Gamma to Film2 43hSet Gamma to Film3 44hSet Gamma to Film4 Gamma Value (Gamma set to Custom1-3)47h 50h30hSet value to 1.8 ... 38hSet value to 2.6 RCU code53h 55h 52h 43h30hSet Unit to receive commands from RCU code A 31hSet Unit to receive commands from RCU code B Header (21h)CommandDataDescription Power ON52h 43h37h 33h 30h 35hSwitch the unit ON Power OFF52h 43h37h 33h 30h 36hSwitch this unit into Stand-by mode Switch input52h 43h37h 33h 30h 38hSwitch to next input 37h 33h 34h 36hSwitch active input to VGA 37h 33h 34h 44hSwitch active input to Component 37h 33h 37h 30hSwitch active input to HDMI 1 37h 33h 37h 31hSwitch active input to HDMI 2 Keypad52h 43h37h 33h 30h 31hUP 37h 33h 30h 32hDOWN 37h 33h 30h 33h BACK 37h 33h 32h 45hMENU 37h 33h 32h 46hOK 37h 33h 33h 34hRIGHT 37h 33h 33h 36hLEFT Hide Display52h 43h37h 33h 31h 44hToggle Hide ON/OFF 37h 33h 44h 30hSwitch Hide to ON 37h 33h 44h 31hSwitch Hide to OFF OSD Position52h 43h37h 33h 34h 32hToggle the OSD position. Picture Mode52h 43h37h 33h 36h 36hAnimation Mode 37h 33h 36h 37hStage 37h 33h 36h 38hCinema Mode 37h 33h 36h 39hFilm Mode 37h 33h 36h 41hNatural 37h 33h 38h 37h3D 37h 33h 36h 46hTHX 37h 33h 36h 43hUser 1 37h 33h 36h 44hUser 2 37h 33h 36h 45hUser 3 37h 33h 43h 41hUser 4 37h 33h 43h 42hUser 5 Color Profile (Yunzi 1)50h 4Dh 50h 52h31h 36hStandard 31h 37hFilm 31h 38hCinema
15.0 MISCELLANEOUS R699820 - Yunzi Series User Manual 43 Color Profile (Yunzi 1)50h 4Dh 50h 52h31h 39hAnime 31h 41hNatural 31h 42hStage 31h 43h3D 31h 44hOff Color Profile (Yunzi 2 & 3)50h 4Dh 50h 52h30h 30hOff 30h 31hFilm1 30h 32hFilm2 31h 33hFilm3 30h 33hStandard 30h 34hCinema1 30h 35hCinema2 30h 36hAnime1 30h 37hAnime2 30h 38hVideo 30h 39hVivid 30h 41hAdobe 30h 42hStage 30h 43h3D Cinema 31h 34h3D Video 31h 35h3D Anime 30h 44hTHX Color Profile Yunzi 2 & 350h 4Dh 50h 52h30h 45hCustom1 30h 46hCustom2 31h 30hCustom3 31h 31hCustom4 31h 32hCustom5 Set User1 name50h 4Dh 55h 31h10 ASCII char.Set custom name to User1 Picture Mode Set User2 name50h 4Dh 55h 32h10 ASCII char.Set custom name to User2 Picture Mode Set User3 name50h 4Dh 55h 33h10 ASCII char.Set custom name to User3 Picture Mode Set User4 name50h 4Dh 55h 34h10 ASCII char.Set custom name to User4 Picture Mode Set User5 name50h 4Dh 55h 35h10 ASCII char.Set custom name to User5 Picture Mode Picture Adjust52h 43h37h 33h 37h 32hToggle Picture Adj. menu Gamma52h 43h37h 33h 37h 35hToggle Gamma function menu 37h 33h 33h 43hSet Gamma to Custom1 37h 33h 33h 44hSet Gamma to Custom2 37h 33h 33h 45hSet Gamma to Custom3 Color Management52h 43h37h 33h 36h 30hSet Color Management to Off 37h 33h 36h 31hSet Color Management to Custom1 37h 33h 36h 32hSet Color Management to Custom2 37h 33h 36h 33hSet Color Management to Custom3 Expert Calibration (THX)52h 43h37h 33h 43h 36hSwitch to Adjust mode 37h 33h 43h 37hTHX plus - Off 37h 33h 43h 38hTHX plus - On 37h 33h 38h 35hSwitch Picture Mode to THX - Bright 37h 33h 38h 36hSwitch Picture Mode to THX - Dark Expert Calibration (ISF)52h 43h37h 33h 35h 38hSwitch to Adjust Mode. 37h 33h 35h 41hISF - Off 37h 33h 35h 42hISF - On 37h 33h 36h 34hSwitch Picture Mode to ISF - Day 37h 33h 36h 35hSwitch Picture Mode to ISF - Night Set Calibrator name50h 4Dh 43h 49h18 ASCII char.Set Calibrator name - ISF must be in Adjust Mode Contrast52h 43h37h 33h 37h 38hContrast + 37h 33h 37h 39hContrast -
15.0 MISCELLANEOUS 44 R699820 - Yunzi Series User Manual Brightness52h 43h37h 33h 37h 41hBrightness + 37h 33h 37h 42hBrightness - Color52h 43h37h 33h 37h 43hColor + 37h 33h 37h 44hColor - Tint52h 43h37h 33h 39h 38hTint + 37h 33h 39h 39hTint - Random Noise Reduction52h 43h37h 33h 30h 42hRNR + 37h 33h 30h 43hRNR - Block Noise Reduction52h 43h37h 33h 31h 30hBNR switch to OFF 37h 33h 30h 46hBNR switch to ON Mosquito Noise Reduction52h 43h37h 33h 30h 44hMNR + 37h 33h 30h 45hMNR - Lamp Power50h 4Dh4Ch 50h 30hSet lamp to Normal 4Ch 50h 31hSet lamp to High Clear Motion Drive52h 43h37h 33h 34h 37hCMD switch to OFF 37h 33h 38h 41hToggle CMD Mode 37h 33h 34h 38hCMD switch to Low 37h 33h 34h 39hCMD switch to High 37h 33h 34h 41hCMD switch to Inverse Telecine HDMI CEC52h 43h37h 33h 35h 36hCEC switch to ON 37h 33h 35h 37hCEC switch to OFF Aspect Ratio52h 43h37h 33h 37h 37hToggle Aspect Ratio. 37h 33h 32h 35hSet Aspect Ratio to 4:3 37h 33h 32h 36hSet Aspect Ratio to 16:9 37h 33h 32h 37hSet Aspect Ratio to Zoom. 37h 33h 41h 45h (PC) Auto 37h 33h 42h 30h(PC) Full 37h 33h 41h 46h(PC) Just Anamorphic Modes52h 43h37h 33h 32h 34hTurn OFF the Anamorphic mode 37h 33h 32h 33hAnamorphic set to Mode A 37h 33h 32h 42hAnamorphic set to Mode B 37h 33h 43h 35hCycle Anamorphic Mode through OFF/A/B Select 3D mode49h 53h33h 44h 31h3D mode set to Auto 33h 44h 33h3D mode set to Side by Side 33h 44h 34h3D mode set to Top and Bottom 33h 44h 30h3D mode is disable (force 2D mode) 3D Left/Right Phase49h 53h33h 50h 30hstandard phase Left/Right 33h 50h 31hinverse phase Right/Left 2D-3D Conversion49h 53h33h 43h 30h2D to 3D conversion is OFF 33h 43h 31h2D to 3D conversion is ON 3D Subtitle Correction49h 53h33h 54h 30hSubtitle correction is OFF 33h 54h 31hSubtitle correction is ON 3D Parallax49h 53h 4Ch 56h46h 46h 46h 31hSet 3D Parallax to -15 ... 46h 46h 46h 38hSet 3D Parallax to -8 46h 46h 46h 39hSet 3D Parallax to -7 46h 46h 46h 41hSet 3D Parallax to -6 ... 46h 46h 46h 45hSet 3D Parallax to -2 46h 46h 46h 46hSet 3D Parallax to -1 30h 30h 30h 30hSet 3D Parallax to 0 30h 30h 30h 31hSet 3D Parallax to 1 ... 30h 30h 30h 39hSet 3D Parallax to 9 30h 30h 30h 41hSet 3D Parallax to 10
15.0 MISCELLANEOUS R699820 - Yunzi Series User Manual 45 Lens Control Examples 3D Parallax49h 53h 4Ch 56h30h 30h 30h 42hSet 3D Parallax to 11 ... 30h 30h 30h 46hSet 3D Parallax to 15 Header (21h)CommandDataDescription Lens Menu52h 43h37h 33h 33h 30hLens Menu: Toggle the Lens Menu Lens Shift Up52h 43h37h 33h 32h 31hShift the picture upward using lens shift Lens Shift Down52h 43h37h 33h 32h 32hShift the picture downward using lens shift Lens Shift Right52h 43h37h 33h 34h 33hShift the picture to the right using lens shift Lens Shift Left52h 43h37h 33h 34h 34hShift the picture to the left using the lens shift Lens Focus +52h 43h37h 33h 33h 31hFocus far Lens Focus -52h 43h37h 33h 33h 32hFocus near Lens Zoom T52h 43h37h 33h 33h 35hZoom Wide Lens Zoom W52h 43h37h 33h 33h 37hZoom Tele Lens Aperture52h 43h37h 33h 32h 30hToggle the Lens Aperture setting menu Lens Aperture +52h 43h37h 33h 31h 45hIncrease the Lens Aperture value Lens Aperture -52h 43h37h 33h 31h 46hDecrease the Lens Aperture value Lens Cover52h 43h37h 33h 32h 44hUnsynchronizes Lens Cover with HIDE function 37h 33h 32h 43hSynchronizes Lens Cover with HIDE function 37h 33h 31h 41hOpen Lens Cover 37h 33h 31h 39hClose Lens Cover Keystone52h 43h37h 33h 31h 42hVertical Keystone + 37h 33h 31h 43hVertical Keystone - 37h 33h 34h 30hHorizontal Keystone + 37h 33h 34h 31hHorizontal Keystone - Lens Memory52h 43h37h 33h 44h 34hSwitch between lens memories Lens Memory select49h 4Eh 4Dh 4Ch30hSelect Lens Memory 1 31hSelect Lens Memory 2 ... 39hSelect Lens Memory 10 Set Memory1 name49h 4Eh 4Dh 31h10 ASCII char.Set custom name to Lens Memory1 Set Memory2 name49h 4Eh 4Dh 32h10 ASCII char.Set custom name to Lens Memory2 ...... Set Mem9 name49h 4Eh 4Dh 39h10 ASCII char.Set custom name to Lens Memory9 Set Mem10 name49h 4Eh 4Dh 41h10 ASCII char.Set custom name to Lens Memory10 You want to...Command to send Switch the projector ONsend: 21h 89h 01h 50h 57h 31h 0Ah receive: 06h 89h 01h 50h 57h 0Ah Switch the projector OFFsend: 21h 89h 01h 50h 57h 30h 0Ah receive: 06h 89h 01h 50h 57h 0Ah Change Active Input to Comp. send: 21h 89h 01h 49h 50h 32h 0Ah or send: 21h 89h 01h 52h 43h 37h 33h 34h 44h 0Ah Display On Screen Menusend: 21h 89h 01h 52h 43h 37h 33h 32h 45h 0Ah receive: 06h 89h 01h 52h 43h 0Ah Change Lens Memory1 name to “TV-size” (unused characters are filled with space = 20h)send: 21h 89h 01h 49h 4Ch 4Dh 31h 0Ah receive: 06h 89h 01h 49h 4Ch 4Dh 31h 0A send: 54h 56h 2Dh 73h 69h 7Ah 65h 20h 20h 20h receive: 06h 89h 01h 49h 4Ch 4Dh 31h 0A
15.0 MISCELLANEOUS 46 R699820 - Yunzi Series User Manual Available Reference and Response commands A reference command ask the projector about its status. Examples 15.2 LAN protocol LAN / RJ-45 communication specification To set the projector to LAN Control Mode, go to the Function menu, then set the Communication Terminal from RS- 232C (default) to LAN. The network settings may have to be modified in the projector’s network menu to match your current LAN network. •DHCP Client: When set to ON, the projector’s IP address will be automatically set by the DHCP server. on the LAN. •IP Address: Sets the IP (Internet Protocol) address of the projector. A valid address must be set for this unit. •Subnet Mask: Sets the Subnet Mask •Default Gateway: Sets the Default IP Gateway of the projector. •MAC Address: A 6 byte hex number that uniquely identifies the projector on the LAN. The value is unique to each individual unit on the LAN network. The first step to verify that the network configuration of this unit has been correctly set is to ping the projector from a computer on the network using the command prompt. Sending a LAN Control Command In order to send a Remote Control compatible command to this unit, you must open a TCP connection on port 20554. and send a command immediately as the connection will be dropped within 5 sec of inactivity. If for any reason you have to change the TCP connection port, you may use the following RS-232c/LAN command. [4Ch 53 50h 54h] + 4 ASCII chars as new port address in hexa HeaderCommandDescriptionResponse Data Power status (header 3Fh)50h 57h Check the Power status.30h: Standby 31h: Power On 32h: Cool Down 34h: Warning Active Input (header 3Fh)49h 50hCheck which input is active.30h: S-video 31h: Video 32h: Component 33h: VGA 36h: HDMI 1 37h: HDMI 2 You want to...Command to send Check if the projector is switched ON send: 3Fh 89h 01h 50h 57h 0Ah receive: 06h 89h 01h 50h 57h 0Ah (confirm cmd) receive: 40h 89h 01h 50h 57h 31h 0Ah (projector is ON) You want to set TCP port to 10000Command to send (RS-232C) Send 10000 as new TCP port value: 10000 is 2710h in hexa, converted in ASCII characters: 32h 37h 31h 30hsend: 21h 89h 01h 4Ch 53h 50h 54h 32h 37h 31h 30h 0Ah receive: 06h 89h 01h 4Ch 53h 0Ah (confirm cmd) Then, reboot Network modulesend: 21h 89h 01h 4Ch 53h 52h 53h 0Ah receive: 06h 89h 01h 4Ch 53h 0Ah (confirm cmd)
15.0 MISCELLANEOUS R699820 - Yunzi Series User Manual 47 LAN communication protocol and timed out Examples 15.3 Infra Red, long hex-pronto compatible RCU The infra red command must be sent using NEC 5 protocol in ASCII format. In the following example, Power ON command is 37h 33h 30h 35h, this command has to be converted as ASCII, it becomes 73 05. To send this command using long hex Pronto compatible, convert the ASCII code as two hexadecimal numbers as follow: Code A: 73h = 115 (for code B: 63h = 99, replace 115 by 99) 05h = 5 Then program the Pronto RCU using the Device number 115 and Function 5: Device Code: 115 (0x73) Function: 5 (0x05): 0000 006D 0001 0011 0141 00A0 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 003C 0014 0014 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0336 A complete device/function chart with their corresponding long hex commands is available, ask your dealer if required. You want to...Command to send Switch the projector ON 1. open TCP connection 2. receive PJ_OK: 50h 4Ah 5Fh 4Fh 4Bh 3. send PJREQ: 50h 4Ah 52h 45h 51h 4. receive PJACK: 50h 4Ah 41h 43h 4Bh 5. send Power On cmd: 21h 89h 01h 52h 43h 37h 33h 30h 35h 0Ah 6. receive confirmation: 06h 89h 01h 52h 43h 0Ah after 5 sec, TCP connection is closed. Switch Anamorphic to mode A 1. open TCP connection 2. receive PJ_OK: 50h 4Ah 5Fh 4Fh 4Bh 3. send PJREQ: 50h 4Ah 52h 45h 51h 4. receive PJACK: 50h 4Ah 41h 43h 4Bh 5. send Anamorphic A: 21h 89h 01h 52h 43h 37h 33h 32h 33h 0Ah 6. receive confirmation: 06h 89h 01h 52h 43h 0Ah after 5 sec, TCP connection is closed. Control DeviceProjector 1. Opening Connection 2. Projector Ready 3. Command Type (PJREQ)(PJ_OK) 4.Projector Acknowledge (PJACK) 5. Command 6. Projector confirms After 5sec, connection is closed. on port 20554
15.0 MISCELLANEOUS 48 R699820 - Yunzi Series User Manual 15.4 Specifications Overview The Yunzi Series uses the latest technology developed to provide the ultimate video-projection experience. LCoS (Liquid Crystal on Silicon) technology based on a reflective principle features an extremely high-definition picture and seamless color gradations. •Design and specifications are subject to change without prior notice. •Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order to aid comprehension. Images may differ from the actual product. Emission MethodLCoS (Reflective Active Matrix Principle) Display Panel/Size0.7" LCoS panels Native Resolution3x 1920 x 1080 pixels Contrast Ratio50,000:1 - 90,000:1 - 130,000:1 Projection LensThrow Ratio 1.4:1 - 2.8:1 with 2.0x Zoom Electronic zoom, focus and shift Electronic aperture control (16-steps Aperture) Brightness1200 ANSI Lumens Screen Size60" to 250" (Aspect ratio 16:9) Distance rangefrom 1,50m to 12 m Input Signals Component Input3x RCA VGA (Yunzi 2 & 3)D-sub 3-lines 15 pins HDMI 1 Inputversion 1.4a with HDCP and CEC HDMI 2 Inputversion 1.4a with HDCP and CEC Color ManagementAdvanced color settings (7-axis: primaries, secondaries and orange) Video processingMPC with Detail Enhancement, Blur, DNR, MNR, BNR 2x FullHD frames per picture and advanced 1/16 pixel alignment Input Sync Frequency Analog Inputs74.5 Mhz Digital Inputs150 Mhz Light-source Lamp230W NSH lamp Power RequirementsAC 110 V - 240 V AC, 50 Hz/60 Hz Power Consumption
15.0 MISCELLANEOUS R699820 - Yunzi Series User Manual 49 Dimensions 455 mm 17.9’’ 505 mm 19.9’’ 455 mm 17.9’ 215 mm 8.5’’ 505 mm 19.9”
15.0 MISCELLANEOUS 50 R699820 - Yunzi Series User Manual RADIO FREQUENCY 3D-GLASSES Radio-Frequency 3D-Glasses uses rechargeable batteries that can be recharge using the mini-USB connector. HOW TO REPLACE BATTERIES ON INFRA-RED 3D-GLASSES