Dream Vision Yunzi+ 1 Very High Contrast Video-projector User Manual

							Operating the 3D-Glasses
1. Charging the 3D-Glasses
The 3D-Glasses come with a USB-rechargeable battery (5) that is charged using the USB to micro-USB 
cable. Connect the cable to the micro-USB slot. The indicating LED (1) will light On red continuously during 
the charge.  The Glasses are fully charged when the indicating LED (1) switches OFF.
2. Turning On your 3D-Glasses
a. Press the Power Button (2) once.
b. The indicating LED (1) will light ON red and the 3D-Glasses are ready to synchronize with the projector.
3. Turning Of your 3D-Glasses
To turn Of the glasses, press the Power Button (2) during 3 seconds until the indicating LED (1) switches 
of.
4. 3D-Glasses battery power
The battery allows up to 75 hours of continuous power. When the battery power is low, the lenses (4) will 
fash slowly (1 second) when the 3D-Glass is powered On.
5. How to use the 3-positions button (3)
The 3-positions button (3) is used to select a functionning mode. By default, the glasses are confgured to 
function with 3D pictures. You can select with the 3-positions button to either watch only left pictures on 
both eyes or only the right pictures on both eyes of the glass.
6. Efciency
 The 3D-Glasses are programmed to automatically stop functionning after 5 minutes of immobilization. To 
turn them back On, just press the Power Button (2) once.(2) Power button
(2) Power button
(3) 3-positions button
Indicating LED (1)
Indicating LED (1)
Optical lenses (4)
Optical lenses (4)
(5) micro-USB slot and
      rechargeable battery 
						

							R699840 - Yunzi+ User Manual
 
42