Dream Vision Inti+ 1 User Manual

							
9.0  MISCELLANEOUS
R699810 - Inti+ Series User Manual 41 
Available Operating commands
RCU Commands and sending them through RS-232
Header (21h)CommandDataDescription
Connection RS-23200h 00hnoneCheck the serial connection
Pow er ON50h 57h31hIf the projector is in stand-by mode, this command
switch the unit ON.
Pow er OFF50h 57h 30hIf the projector is powered ON, this command
switches this unit into Stand-by Mode.
Switch Input49h 50h32hSwitch active input to Component
33hSwitch active input to VGA
36hSwitch active input to HDMI 1
37hSwitch active input to HDMI 2
2BhSwitch to next input
2DhSwitch to previous input
T est Patterns53h 53h 54h 50h30h 30hTest Patterns  Off
30h 31hColor Cross Hatch
30h 32hCross Hatch (W)
...
30h 39hRaster (White 50%)
30h 41hRaster (White 0%)
...
30h 46hRaster (Magenta 100%)
31h 30hRaster (Yellow 100%)
...
31h 39hColor Palette
Gamma47h 54h30hSet Gamma to Normal
31hSet Gamma to A
32hSet Gamma to B
33hSet Gamma to C
34hSet Gamma to Custom1
35hSet Gamma to Custom2
36hSet Gamma to Custom3
37hSet Gamma to D
41hSet Gamma to Film1
42hSet Gamma to Film2
43hSet Gamma to Film3
44hSet Gamma to Film4
Gamma Value
(Gamma set to 
Custom1-3)47h 50h30hSet value to 1.8
31hSet value to 1.9
...
37hSet value to 2.5
38hSet value to 2.6
RCU code53h 55h 52h 43h30hSet Unit to receive commands from RCU code A
31hSet Unit to receive commands from RCU code B
Header (21h)CommandDataDescription
Pow er ON52h 43h37h 33h 30h 35hSwitch the unit ON
Power OFF52h 43h37h 33h 30h 36hSwitch this unit into Stand-by mode
Switch input52h 43h37h 33h 30h 38hSwitch to next input
37h 33h 34h 36hSwitch active input to VGA
37h 33h 34h 44hSwitch active input to Component
37h 33h 37h 30hSwitch active input to HDMI 1
37h 33h 37h 31hSwitch active input to HDMI 2 
						

							
9.0  MISCELLANEOUS
42R699810 - Inti+ Series User Manual
Keypad52h 43h37h 33h 30h 31hUP
37h 33h 30h 32hDOWN
37h 33h 30h 33h BACK
37h 33h 32h 45hMENU
37h 33h 32h 46hOK
37h 33h 33h 34hRIGHT
37h 33h 33h 36hLEFT
Hide Display52h 43h37h 33h 31h 44hToggle Hide ON/OFF
37h 33h 44h 30hSwitch Hide to ON
37h 33h 44h 31hSwitch Hide to OFF
OSD Position52h 43h37h 33h 34h 32hToggle the OSD position.
Test Pattern52h 43h37h 33h 35h 39hSwitch Test Patterns
Picture Mode52h 43h37h 33h 36h 36hAnimation Mode
37h 33h 36h 37hStage
37h 33h 36h 38hCinema Mode
37h 33h 36h 39hFilm Mode
37h 33h 36h 41hNatural
37h 33h 36h 42hDynamic
37h 33h 38h 37h3D
37h 33h 36h 43hUser 1
37h 33h 36h 44hUser 2
37h 33h 36h 45hUser 3
37h 33h 43h 41hUser 4
37h 33h 43h 42hUser 5
37h 33h 36h 46hTHX
Set User1 name50h 4Dh 55h 31h10 ASCII char.Set custom name to User1 Picture Mode
Set User2 name50h 4Dh 55h 32h10 ASCII char.Set custom name to User2 Picture Mode
Set User3 name50h 4Dh 55h 33h10 ASCII char.Set custom name to User3 Picture Mode
Set User4 name50h 4Dh 55h 34h10 ASCII char.Set custom name to User4 Picture Mode
Set User5 name50h 4Dh 55h 35h10 ASCII char.Set custom name to User5 Picture Mode
Picture Adjust52h 43h37h 33h 37h 32hToggle Picture Adj. menu
Gamma52h 43h37h 33h 37h 35hToggle Gamma function menu
37h 33h 33h 38hSet Gamma to Normal
37h 33h 33h 39hSet Gamma to A
37h 33h 33h 41hSet Gamma to B
37h 33h 33h 42hSet Gamma to C
37h 33h 33h 43hSet Gamma to Custom1
37h 33h 33h 44hSet Gamma to Custom2
37h 33h 33h 45hSet Gamma to Custom3
37h 33h 33h 46hSet Gamma to D
Color Temperature52h 43h37h 33h 37h 36hToggle Color temperature
37h 33h 34h 45hSet Color Temperature to 5800K
37h 33h 34h 46hSet Color Temperature to 6500K
37h 33h 35h 30hSet Color Temperature to 7500K
37h 33h 35h 31hSet Color Temperature to 9300K
37h 33h 35h 32hSet Color Temperature to High Bright
37h 33h 35h 33hSet Color Temperature to Custom1
37h 33h 35h 34hSet Color Temperature to Custom2
37h 33h 35h 35hSet Color Temperature to Custom3
Color Management52h 43h37h 33h 36h 30hSet Color Management to Off
37h 33h 36h 31hSet Color Management to Custom1
37h 33h 36h 32hSet Color Management to Custom2
37h 33h 36h 33hSet Color Management to Custom3 
						

							
9.0  MISCELLANEOUS
R699810 - Inti+ Series User Manual 43 
Expert Calibration
(THX)52h 43h37h 33h 43h 36hSwitch to Adjust mode
37h 33h 43h 37hTHX plus - Off
37h 33h 43h 38hTHX plus - On
37h 33h 38h  35hSwitch Picture Mode to THX - Bright
37h 33h 38h 36hSwitch Picture Mode to THX - Dark
Expert Calibration
(ISF)52h 43h37h 33h 35h 38hSwitch to Adjust Mode.
37h 33h 35h 41hISF - Off
37h 33h 35h 42hISF - On
37h 33h 36h  34hSwitch Picture Mode to ISF -  Day
37h 33h 36h 35hSwitch Picture Mode to ISF - Night
Set Calibrator name50h 4Dh 43h 49h18 ASCII char.Set Calibrator name - ISF must be in Adjust Mode
Contrast52h 43h37h 33h 37h 38hContrast +
37h 33h 37h 39hContrast -
Brightness52h 43h37h 33h 37h 41hBrightness +
37h 33h 37h 42hBrightness -
Color52h 43h37h 33h 37h 43hColor +
37h 33h 37h 44hColor -
Tint52h 43h37h 33h 39h 38hTint +
37h 33h 39h 39hTint -
Sharpness52h 43h37h 33h 37h 45hSharpness +
37h 33h 37h 46hSharpness -
Detail Enhancement52h 43h37h 33h 31h 31hDetail +
37h 33h 31h 32hDetail -
CTI
Color Transient Imp52h 43h37h 33h 35h 43hCTI - OFF
37h 33h 35h 44hCTI- Low
37h 33h 35h 45hCTI - Middle
37h 33h 35h 46hCTI - High
Mosquito Noise 
Reduc52h 43h37h 33h 30h 44hMNR +
37h 33h 30h 45hMNR -
Block Noise
Reduc52h 43h37h 33h 31h 30hBNR switch to OFF
37h 33h 30h 46hBNR switch to ON
Random Noise 
Reduc52h 43h37h 33h 30h 42hRNR +
37h 33h 30h 43hRNR -
MPC Leve50h 4Dh 4Ah 4Ch 30h 30h 30h 30hSet MPC Level to OFF
30h 30h 30h 31hSet MPC Level to 1
30h 30h 30h 32hSet MPC Level to 2
30h 30h 30h 33hSet MPC Level to 3
Lamp Power50h 4Dh4Ch 50h 30hSet lamp to Normal
4Ch 50h 31hSet lamp to High
Clear Motion Drive52h 43h37h 33h 34h 37hCMD switch to OFF
37h 33h 38h 41hToggle CMD Mode
37h 33h 43h 45hCMD switch to Mode1
37h 33h 43h 46hCMD switch to Mode2
37h 33h 34h 38hCMD switch to Mode3
37h 33h 34h 39hCMD switch to Mode4
37h 33h 34h 41hCMD switch to Inverse Telecine
HDMI CEC52h 43h37h 33h 35h 36hCEC switch to ON
37h 33h 35h 37hCEC switch to OFF
Aspect Ratio52h 43h37h 33h 37h 37hToggle Aspect Ratio.
37h 33h 32h 35hSet Aspect Ratio to 4:3
37h 33h 32h 36hSet Aspect Ratio to 16:9
37h 33h 32h 37hSet Aspect Ratio to Zoom.
37h 33h 41h 45h (PC) Auto
37h 33h 42h 30h(PC) Full
37h 33h 41h 46h(PC) Just 
						

							
9.0  MISCELLANEOUS
44R699810 - Inti+ Series User Manual
Lens Control
Anamorphic Modes52h 43h37h 33h 32h 34hTurn OFF the Anamorphic mode
37h 33h 32h 33hAnamorphic set to Mode A
37h 33h 32h 42hAnamorphic set to Mode B
37h 33h 43h 35hCycle Anamorphic Mode through OFF/A/B
Select 3D mode49h 53h33h 44h 31h3D mode set to Auto
33h 44h 33h3D mode set to Side by Side
33h 44h 34h3D mode set to Top and Bottom
33h 44h 30h3D mode is disable (force 2D mode)
2D-3D Conversion49h 53h33h 43h 30h2D to 3D conversion is OFF
33h 43h 31h2D to 3D conversion is ON
3D Subtitle 
Correction49h 53h33h 54h 30hSubtitle correction is OFF
33h 54h 31hSubtitle correction is ON
3D Parallax49h 53h 4Ch 56h46h 46h 46h 31hSet 3D Parallax  to -15
...
46h 46h 46h 39hSet 3D Parallax  to -7
46h 46h 46h 41hSet 3D Parallax  to -6
...
46h 46h 46h 45hSet 3D Parallax  to -2
46h 46h 46h 46hSet 3D Parallax to -1
30h 30h 30h 30hSet 3D Parallax  to 0
30h 30h 30h 31hSet 3D Parallax  to 1
30h 30h 30h 32hSet 3D Parallax  to 2
...
30h 30h 30h 39hSet 3D Parallax  to 9
30h 30h 30h 41hSet 3D Parallax  to 10
...
30h 30h 30h 46hSet 3D Parallax  to 15
Header (21h)CommandDataDescription
Lens Menu52h 43h37h 33h 33h 30hLens Menu: Toggle the Lens Menu
Lens Shift Up52h 43h37h 33h 32h 31hShift the picture upward using lens shift
Lens Shift Down52h 43h37h 33h 32h 32hShift the picture downard using lens shift
Lens Shift Right52h 43h37h 33h 34h 33hShift the picture to the right using lens shift
Lens Shift Left52h 43h37h 33h 34h 34hShift the picture to the left using the lens shift
Lens Focus +52h 43h37h 33h 33h 31hFocus far
Lens Focus -52h 43h37h 33h 33h 32hFocus near
Lens Zoom T52h 43h37h 33h 33h 35hZoom Tele
Lens Zoom W52h 43h37h 33h 33h 37hZoom Wide
Lens Aperture52h 43h37h 33h 32h 30hToggle the Lens Aperture setting menu
37h 33h 32h 38hSet Lens Aperture to setting “1”
37h 33h 32h 39hSet Lens Aperture to settign “2”
37h 33h 32h 40hSet Lens Aperture to setting “3”
Lens Aperture +52h 43h37h 33h 31h 45hIncrease the Lens Aperture value
Lens Aperture -52h 43h37h 33h 31h 46hDecrease the Lens Aperture value
Lens Cover52h 43h37h 33h 32h 44hUnsynchronizses Lens Cover with HIDE function
37h 33h 32h 43hSynchronises Lens Cover with HIDE function
37h 33h 31h 41hOpen Lens Cover
37h 33h 31h 39hClose Lens Cover
Ke ystone52h 43h37h 33h 31h 42hVertical Keystone +
37h 33h 31h 43hVe rtical Keystone -
37h 33h 34h 30hHorizontal Keystone +
37h 33h 34h 31hHorizontal Keystone -
Lens Memory52h 43h37h 33h 44h 34hSwitch between lens memories
Set Memory1  name49h 4Ch 4Dh 31h10 ASCII char.Set custom name to Lens Memory1
Set Memory2  name49h 4Ch 4Dh 32h10 ASCII char.Set custom name to Lens Memory2 
						

							
9.0  MISCELLANEOUS
R699810 - Inti+ Series User Manual 45 
Examples
Available Reference and Response commands
A reference command ask the projector about its status.
Examples
9.2 LAN protocol (Inti+2 & +3)
LAN / RJ-45 communication specification
To set the projector to LAN Control Mode, go to the Function menu, then set the Communication Terminal from RS-
232C (default) to LAN.
The network settings may have to be modified in the projector’s network menu to match your current LAN network.
Set Memory3  name49h 4Ch 4Dh 33h10 ASCII char.Set custom name to Lens Memory3
Lens Memory select49h 4Eh4Dh 4Ch 30hSelect Lens Memory 1
4Dh 4Ch 31hSelect Lens Memory 2
4Dh 4Ch 32hSelect Lens Memory 3
Y ou want to...Command to send
Switch the projector ONsend: 21h 89h 01h 50h 57h 31h 0Ah
receive: 06h 89h 01h 50h 57h 0Ah
Switch the projector OFFsend: 21h 89h 01h 50h 57h 30h 0Ah
receive: 06h 89h 01h 50h 57h 0Ah
Switch the projector OFF with
OSD confirmationsend: 21h 89h 01h 52h 43h 37h 33h 30h 36h 0Ah
receive: 06h 89h 01h 52h 43h 0Ah
Change Active Input to Comp.
send: 21h 89h 01h 49h 50h 32h 0Ah
or
send: 21h 89h 01h 52h 43h 37h 33h 34h 44h 0Ah
Display On Screen Menusend: 21h 89h 01h 52h 43h 37h 33h 32h 45h 0Ah
receive: 06h 89h 01h 52h 43h 0Ah
Change Lens Memory1 name to
”TV-size“ (unused characters are
filled with space = 20h)send: 21h 89h 01h 49h 4Ch 4Dh 31h 0Ah
receive: 06h 89h 01h 49h 4Ch 4Dh 31h 0A
send: 54h 56h 2Dh 73h 69h 7Ah 65h 20h 20h 20h
receive: 06h 89h 01h 49h 4Ch 4Dh 31h 0A
HeaderCommandDescriptionResponse Data
Po wer status
(header 3Fh)50h 57h Check the Power status.30h: Standby
31h: Power On
32h: Cool Down
34h: Warning
Active Input
(header 3Fh)49h 50hCheck which input is active.30h: S-video
31h: Video
32h: Component
33h: VGA
36h: HDMI 1
37h: HDMI 2
Gamma Table (header 3Fh)47h 54hCheck the current Gamma table30h: Normal
31h: A
32h: B
33h: C
34h: Custom1
35h: Custom2
36h: Custom3
Y ou want to...Command to send
Check if the projector is switched ON
send: 3Fh 89h 01h 50h 57h 0Ah
receive: 06h 89h 01h 50h 57h 0Ah (confirm cmd)
receive: 40h 89h 01h 50h 57h 31h 0Ah (projector is ON)
Which input is active
send: 3Fh 89h 01h 49h 50h 0Ah
receive: 06h 89h 01h 49h 50h 0Ah (confirm cmd)
receive: 40h 89h 01h 49h 50h 36h 0Ah (HDMI 1 is active) 
						

							
9.0  MISCELLANEOUS
46R699810 - Inti+ Series User Manual
•DHCP Client: When set to ON, the projector’s IP address will be automatically set by the DHCP server. on the
LAN.
• IP Address: Sets the IP (Internet Protocol) address of the projector. A valid address must be set for this unit.
• Subnet Mask: Sets the Subnet Mask
• Default Gateway: Sets the Default IP Gateway of the projector.
•M AC Address: A 6 byte hex number that uniquely identifies the projector on the LAN. The value is unique to
each individual unit on the LAN network.
The first step to verify that the network configuration of this unit has been correctly set is to ping the projector from \
a
computer on the network using the command prompt.
Sending a LAN Control Command
In order to send a Remote Control compatible command to this unit, you must open a TCP connection on port
20554. and send a command immediately as the connection will be dropped within\
 5 sec of inactivity.. If for any
reason you have to change the TCP connection port, you may use the following RS-232c/LAN command.
[4Ch 53 50h 54h] + 4 ASCII chars as new port adress in hexa
LAN communication protocol and timed out
Examples
Y ou want to set TCP port to 10000Command to send  (RS-232C)
Send 10000 as new  TCP port value:
10000 is 2710h in hexa, converted in
ASCII characters: 32h 37h 31h 30hsend: 21h 89h 01h 4Ch 53h 50h 54h 32h 37h 31h 30h 0Ah
receive: 06h 89h 01h 4Ch 53h 0Ah (confirm cmd)
Then, reboot Network modulesend: 21h 89h 01h 4Ch 53h 52h 53h 0Ah
receive: 06h 89h 01h 4Ch 53h 0Ah (confirm cmd)
You want to...Command to send
Switch the projector ON
1. open TCP connection
2. receive PJ_OK : 50h 4Ah 5Fh 4Fh 4Bh
3. send PJREQ: 50h 4Ah 52h 45h 51h
4. receive PJACK: 50h 4Ah 41h 43h 4Bh
5. send Power On cmd: 21h 89h 01h 52h 43h 37h 33h 30h 35h 0Ah
6. receive confirmation: 06h 89h 01h 52h 43h 0Ah
after 5 sec, TCP connection is closed.
Switch Anamorphic to mode A
1. open TCP connection
2. receive PJ_OK: 50h 4Ah 5Fh 4Fh 4Bh
3. send PJREQ: 50h 4Ah 52h 45h 51h
4. receive PJACK: 50h 4Ah 41h 43h 4Bh
5. send Anamorphic A: 21h 89h 01h 52h 43h 37h 33h 32h 33h 0Ah
6. receive confirmation: 06h 89h 01h 52h 43h 0Ah
after 5 sec, TCP connection is closed.
Control Device Projector
1. Openning Connection
2. Projector Ready
3. Command Type (PJREQ) (PJ_OK) 
4.Projector Acknoledge (PJACK)
5. Command
6. Projector confirms
After 5sec, connection is closed.
on port 20554 
						

							
9.0  MISCELLANEOUS
R699810 - Inti+ Series User Manual 47 
9.3 Infra Red, long hex-pronto compatible RCU
The infra red command must be sent using NEC 5 protocol in ASCII format.
In the following example, Power ON command is 37h 33h 30h 35h, this command has to be converted as ASCII, it
becomes 73 05.
To send this command using long hex Pronto compatible, convert the ASCII code as two hexadecimal numbers as
f ollow:
Code A: 73h = 115 (for code B: 63h = 99, replace 115 by 99)
05h = 5
Then program the Pronto RCU using the Device number 115 and Function 5:
Device Code: 115 (0x73) Function: 5 (0x05):
0000 006D 0001 0011 0141 00A0 0014 003C 0014 003C 0014 0014 0014 0014 00\
14 003C 0014 003C 0014 003C
0014 0014 0014 003C 0014 0014 0014 003C 0014 0014 0014 0014 0014 0014 00\
14 0014 0014 0014 0014 0336
A complete device/function chart with their corresponding long hex commands is available, ask your dealer if
required.
9.4 Compatible resolutions
On HDMI Inputs
On Sub-D15 (VGA) input
DesignationResolutionfh (kHz)fv (Hz)Dot (MHz)P olarityTotal dots x lines
V GA 60640 x 48031.50060.00025.200H- V-800 x 525
VGA 59.94640 x 48031.46959.94025.175H- V-800 x 525
SVGA 60800 x 60037.87960.31740.000H+ V+1056 x 628
XGA 601024 x 76848.36360.00465.000H- V-1344 x 806
WXGA 601280 x 76847.76060.00079.998H- V+1675 x 796
WXGA+ 601440 x 90055.91959.999106.470H- V+1904 x 932
SXGA 601280 x 102463.98160.020108.000H+ V+1688 x 1066
WSXGA+ 601680 x 105065.22260.002147.140H- V+2256 x 1087
WUXGA 601920 x 120074.03859.950154.000H+ V-2080 x 1235
DesignationResolutionfh (kHz)fv (Hz)Dot (MHz)PolarityTotal dots x lines
V GA 60640 x 48031.50060.00025.175H- V-800 x 525
VGA 72640 x 48037.90072.00031.500H- V-832 x 520
VGA 75640 x 48037.50075.00031.500H- V-840 x 500
VGA 85640 x 48043.30085.00036.000H- V-832 x 509
SVGA 60800 x 60037.90060.00040.000H+ V+1056 x 628
SVGA 72800 x 60048.10072.00050.000H+ V+1040 x 666
SVGA 75800 x 60046.90075.00049.500H+ V+1056 x 625
SVGA 85800 x 60053.70085.00056.250H+ V+1048 x 631
XGA 601024 x 76848.40060.00065.000H- V-1344 x 806
XGA 701024 x 76856.50070.00075.000H- V-1328 x 806
XGA 751024 x 76860.02375.02978.750H+ V+1312 x 800
XGA 851024 x 76868.70085.00094.500H+ V+1376 x 808
WXGA 601280 x 76847.76060.00079.998H- V+1675 x 796
WXGA+ 601440 x 90055.91959.999106.470H- V-1904 x 932
SXGA 601280 x 102463.98160.020108.000H+ V+1688 x 1066
SXGA+ 601400 x 105064.74059.950101.000H+ V+1560 x 1080
WSXGA+ 601680 x 105065.22260.002147.140H- V-2256 x 1087
1920 x 1080 601920 x 108067.50060.000148.500H+ V+2200 x 1125
MAC 13”640 x 48035.00066.66730.240H- V-864 x 525
MAC 16”832 x 62449.10775.08755.000H- V-1120 x 654
MAC 19”1024 x 76860.24174.92780.000H- V-1328 x 804 
						

							
9.0  MISCELLANEOUS
48R699810 - Inti+ Series User Manual
9.5 Specifications
Overview
The Inti+ Series uses the latest technology developed to provide the ultimate video-projection experience. LCoS
(Liquid Crystal on Silicon) technology based on a reflective principle features an extremely high-definition picture
and seamless color gradations.
•Design and specifications are subject to change without prior notice.
• Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in
order to aid comprehension. Images may differ from the actual product.
Emission MethodLCoS (Reflective Active Matrix Principle)
Display Panel/Size0.7" LCoS panel
Native Resolution3x 1920 x 1080 pixels
Contrast Ratio50,000:1, 80,000:1 and 120,000:1
Projection LensThrow Ratio 1.4:1 - 2.8:1 with 2.0x Zoom
Electronic zoom, focus and shift
Electronic aperture control (16-steps Aperture)
Brightness1300 (Inti+1) - 1200 (Inti+2 & +3)ANSI Lumens
Screen Size60" to 250" (Aspect ratio 16:9)
Distance rangefrom 1,50m to 12 m
Input Signals
Component Input3x RCA
V GA (Inti+2 & +3)D-sub 3-lines 15 pins
HDMI 1 Inputversion 1.4a with HDCP and CEC
HDMI 2 Inputversion 1.4a with HDCP and CEC
Color ManagementAdvanced color settings (7-axis: primaries, secondaries and orange)
Video processingDetail Enhancement, Sharpness, DNR, MNR, BNR
Inti+2 & +3 only: 2x FullHD frames per picture and advanced 1/16 pixel 
alignment
Input Sync Frequency
Analog Inputs74.5 Mhz
Digital Inputs150 Mhz
Light-source Lamp220 W Ultra-high pressure mercury lamp
Po wer RequirementsAC  110 V - 240 V AC, 50 Hz/60 Hz
Power Consumption
						

							
9.0  MISCELLANEOUS
R699810 - Inti+ Series User Manual 49 
Dimensions
455 mm
17.9’’
505 mm
19.9’’
455 mm
17.9’’
215 mm
8.5’’
505 mm19.9’ 
						

							
9.0  MISCELLANEOUS
50R699810 - Inti+ Series User Manual