Dream Vision Dreamweaver 2 User Manual

							 
11 
Modifi
cation of the pa
ge 33 of the User’
s Guide
 
Appendix 
SpecificationAccessories 
NOTE  
: Use only approved accessories.  
Temperature  
Operating
50 to 95 
°  
F (10 to 35 
° 
 C) at 0 - 10,000 feet
Non-operating
-4 to 158 
°  
F (-20 to 70 
° 
 C) at 0 -20,000 feet 
Altitude  
Operating 0 to 2,286 meters (7,500 feet)
Non-operating 0 to 6,096 meters (20,000 feet) 
Humidity  
Operating  10% to 95% relative humidity, non-condensing
Non-operating 10% to 90% relative humidity, non-condensing 
Dimensions 
Diameter: 439 mm - Height: 127 mm 
Weight 
4. 4 kg unpacked 
Optics  
Focus Range1.5 - 10 meters (5 - 32.8 feet) 
Lamp Type 
UHP lamp (dual watt: 200 and 250 watt) 
Input Power Requirements  
100V-120V 4A, 50/60 Hz
200V-240V 2A 50 Hz
 
Standard Accessories
(ship with the projector) 
Shipping Box (with packaging)
Power Cable (country-dependent)
Remote (and batteries)
Projection Lamp Module (included in projector)
Lens Cap
User’s Guide  
Optional Accessories  
Projector Mount
Replacement Lamp Module 
						

							 
12 
Modifi
cation of the P
age 34 of the User’
s Guide
 
Red LED behavior and projector errors 
If the projector is not functioning properly and the red LED is blinking, con-
sult  
Ta ble 2 
 to determine a possible cause. There are two second pauses 
between the blinking cycles. 
Projected image size 
Table 1: Red LEDs
Red LED Behavior Explanation 
One (1) blink The lamp wont strike after five (5) 
attempts. Check the lamp and lamp door 
installations for loose connections.
Three (3) blinks The projector has shut down the lamp. 
Turn off the projector, wait one minute, 
then turn it back on. Replace the lamp. 
Contact Technical Support for repair if 
replacing the lamp does not solve the 
problem.
Four (4) blinks The fan has failed. Replace the lamp (the 
lamp module contains a fan). Contact 
Technical Support for repair if replacing 
the fan does not solve the problem.
Five (5) blinks The projector is overheating. Check for a 
blocked air vent. Contact Technical Sup-
port for repair if clearing the air vents 
does not solve the problem. 
Ta ble 2: 
Range of projection distances for a given screen size 
16:9 Screen 
dimensions 
(inches/m) Projection Distance
Screen 
diagonal
(inches/m)Maximum 
zoom
(feet/m)Minimum 
zoom
(feet/m)  
27x48
.69x1.2255.1/1.4 7.5/2.3 10.4/3.19
34x60
.9x1.568.8/1.75 9.42/2.87 13.06/3.98
40.5x72
1.0/1.882.6/2.1 11.09/3.38 15.36/4.68
45x80
1.1x2.091.8/2.3 12.27/3.74 17.03/5.19
49x87
1.2/2.299.8/2.5 13.48/4.11 18.7/5.7
52X92
1.3X2.3105.6/2.7 14.21/4.33 19.69/6.0
54X96
1.4X2.4110.1/2.8 14.93/4.55 20.07/6.31
58X104
1.5X2.6119.3/3.0 16.14/4.92 22.38/6.82
65X116
1.7X3133.1/3.4 18.54/5.65 25.72/7.84