Home > Dillon Precision > Firearms accessories > Dillon Precision XL 650 Instruction Manual

Dillon Precision XL 650 Instruction Manual

Here you can view all the pages of manual Dillon Precision XL 650 Instruction Manual. The Dillon Precision manuals for Firearms accessories are available online for free. You can easily download all the documents as PDF.

Page 41

6.a)Installation of thelarge powder
bar – slide the large powder bar into
the powder measure body.
b)Installation of the small powder
bar – slide both the small powder bar
and small powder bar spacer into the
powder measure body FIG 199.
Note: The groove along the edge of
the spacer (see arrow FIG 199) is to
be installed face down. The hole in
the spacer is to be aligned with the
hole in the top of the powder mea-
sure body FIG 199.
FIG 199
FIG 200
7. Seat the white bellcrank cube into the
notch on the...

Page 42

Trouble Shooting
Dies Too Short
A. Need Dillon die lockrings (14067).
1. Three extra come with the machine.
2. Threadaphobia (fear of too few 
threads) can strike anyone-anytime. 
It is a common but curable disease. 
You only need one thread showing 
above the toolhead to hold the die 
lockring.
Cartridge won’t feed into chamber
1. Overall length too long. See loading 
manual for dimensions.
2. Improper headspace. See loading 
manual for dimensions. Use head-
space case gage.
3. Too much bell left on...

Page 43

4. Point of decap pin is squared off not 
rounded (pin gets stuck in anvil and 
pulls primer back into primer pocket).
5. Berdan primed brass.
a. Berdan primed brass has two flash 
holes and should not be reloaded.
I. Case not properly sized.
1. Size die not properly adjusted.
2. Handle not cycled all the way down 
to stops.
3. Case was shot in an unsupported 
chamber and base is excessively 
expanded.
a. Hot loads.
b. Consult a gunsmith about chamber.
J. Spent primers dropping on floor.
1. Spent primer...

Page 44

Station 4- Bullet Seating
A. Erratic seating depth of the bullet.
1. Variations of less than 20 thou-
sandths of an inch are due to varia-
tions in cases and bullets. This is not
a problem.
2. Build up of lead shavings and/or lube
in the seater or crimp dies.
3. Bullets having erratic dimension 
(length and/or the ogive).
4. Use of improper seating plug for the 
type of  bullet being used.
5. Variations in case types and/or lots 
(sort your brass).
6. Refer to loading manual for dimen-
sions.
B. Shaving...

Page 45

46
650 Caliber Conversion Chart - Pistol
To order a complete conversion use the 5 digit number to the right of the caliber listing.
To order individual parts use the 5 digit number below the description. 
Casefeed
discsarenotincludedincaliberconversionkits.
Caliber Complete Shellplate Locator Funnel Station 1 Casefeed Arm Body Casefeed Primer Powder
ConversionNumber Button Locator Adapter Bushing Bushing Disc System Check Rod
7TCU 21103 (3) 13345 (3) 14060 (N) 13014 13614 (White) 13575 (Green) 13412 (Sm)...

Page 46

47
650 Caliber Conversion Chart - Rifle
To order a complete conversion use the 5 digit number to the right of the caliber listing.
To order individual parts use the 5 digit number below the description.
Casefeed
discsarenotincludedincaliberconversionkits.
Caliber Complete Shellplate Locator Funnel Station 1 Casefeed Arm Body Casefeed Primer Powder
Conversion Number Button Locator Adapter Bushing Bushing Disc System Check Rod
.17 Rem 21099 (3) 13345 (3) 14060 (O) 12921 (3) 13614 (White) 13575 (Green)...

Page 47

48
650 Caliber Conversion Chart - Rifle
To order a complete conversion use the 5 digit number to the right of the caliber listing.
To order individual parts use the 5 digit number below the description.
Casefeed
discsarenotincludedincaliberconversionkits.
Caliber Complete Shellplate Locator Funnel Station 1 Casefeed Arm Body Casefeed Primer Powder
Conversion Number Button Locator Adapter Bushing Bushing Disc System Check Rod
.30-30 Win 21112 (7) 13300 (4) 14047 (B) 13587 (7) 13176 (Orange220) 14851...

Page 48

49
 
 
 
1
2
3
4 6
57
8
10 10 9
Complete
Powder Measure
Assembly
see page 56 for
more details
Toolhead
Assembly
see page 53
for more details
Platform Assembly
see page 54
for more details 

Page 49

50
2315
16 24 1718
14
14
14 1311
12 2125
26
27
22 19
19 20
Casefeed Body Assembly
see page 52 for more details
Machine Assembly
21326 No feed Mounting Kit includes 
items 1, 2, 3, 4, and 5
113905 Cam Screw 10-24x1 1/2
213738 #10 Rod Washer
312831 No Feed Mount Tube
413859 Casefeed Tube Clip
513895 10-24x3/8 Bolt
617123 Casefeed Mount Post
713099 Casefeed Feed Tube
13101 Casefeed Feed Tube, Large
813911 1/4-20x2 3/4 Bolt
913613 Clamp
10 13988 Casefeed Post Nut
11 13830 Mainshaft Pivot Pin
12 13789...

Page 50

51
Lower Machine Assembly113470 Chute/Bin Mount
213839 Blue Cartridge Bin
Items A, B, and C included in optional
Hardware Mounting Kit, #16600.
2 1
A
B
C FrameBench 
Start reading Dillon Precision XL 650 Instruction Manual

Related Manuals for Dillon Precision XL 650 Instruction Manual

All Dillon Precision manuals