Digital Projection Titan Sx+ 3d, Sx+ Dual 3d, Sx+ 3d Ultra Contrast, Sx+ Dual 3d Ultra Contrast Specifications

							Overview
PERFORMANCE SPECIFICATIONS
Brightness (±10%)
sx+ 3D:  4,500 ANSI Lumens 
sx+ 3D Ultra Contrast:  2,500 ANSI Lumens 
sx+ Dual 3D:  9,000 ANSI Lumens 
sx+ Dual 3D  Ultra Contrast: 4,500 ANSI Lumens
Contrast Ratio  (±10%)
Standard Models - 2000:1 
Ultra Contrast  Models - 4000:1
Display Type
3 x .95” Dark Chip 1080p DMD™ with   
Fast Transit Pixels for smooth   
greyscale and improved contrast
DMD Specification
1400 x 1050 pixels native, 12˚ tilt angle
Fill Factor
90%
Sealed Optics at DMD™ Interface
Protects DMD’s™ from optical contamination
Source Compatibility
•   Composite, s-video, and color difference     
  video standards up to 1080i
•  RGB graphics standards up to 1920 x 1080 
•   DVI standards
•  High definition RGB and color difference     
  standards
•  High definition / standard definition serial      
  digital formats (SD/HD-SDI)
Video Processing
•  Enhanced 7 point color correction
•  Dual Flash Processing™ increases 60 Hz inputs to 
  120 Hz displayed output
•  FastFrame™ Motion Blur Reduction
•   Xenon Color Mode - User selectable notch filter and   
  xenon-color mode processing, enable the projector   
  to replicate xenon lamp spectral performance
•    Class leading Video de-interlacing/processing of SD   
  and HD sources using auto 3:2 and 2:2 extraction, 
  ruggedized for editing discontinuities
•   Pixel-based motion adaptive interpolation
•   User selectable preset, parametric 
  de-gamma and user downloadable de-gamma
•   Frame Delay: as low as 1 frame, source dependant
•   Auto mode selection - plug and play setup
Specifications subject to change without notice   DP V2.0 07/2010   ©2010 Digital Projection, Inc.
™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc.
TITAN 3D Pro Series II
TITAN sx+ 3D • TITAN sx+ Dual 3D • TITAN sx+ 3D  Ultra Contrast • TITAN sx+ Dual 3D Ultra Contrast
High Bandwidth Input
• 3D capable 
• Pixel Mapped - with low latency
• FastFrame™ Motion Blur Reduction  
• 120 Hz with no frame doubling 
3D Sync
Sync In - External lock
Sync Out - Shutter glass control  
 
Network Connection
LAN via RJ 45, Wireless 802.11b,
full protocol feature set
Lamp Type
Single or Dual High Intensity Discharge module   
Lamp Life
 (typical)1  2000 hours per lamp, dual lamp models 
provide 4000 hours sequential lamp operation,
lamp low provides extended lamp life
Lens Mount
Zoom Lenses: Motorized horizontal and vertical
lens shift, zoom and focus 
Fixed Lenses: Manual Focus
Lens Shift (maximum)
Fixed 1.2:1 and Zoom Lenses:
    •  Vert: +0.5, -0.4 frame; Hor: ±0.2 frame
0.73 Fixed lens: 
    •  Vert: ±0.11 frame; Hor: ±0.07 frame
Lens Options
0.73  :1 fixed  2.02-2.77  :1 zoom
1.2  :1  fixed  2.77-4.51 :1 zoom
1.26-1.61  :1 zoom  4.51-7.53 :1 zoom
1.5-2.02  :1 zoom  7.5-11.2 :1 zoom
• 1.2:1 Lenses include manual aperture
•    High-contrast lenses available for 0.73:1 
   and all zoom lenses
Mechanical Mounting
•    Front or rear table;  Front or rear ceiling 
   (ceiling mount optional)
•    Rugged, staging tolerant chassis with
   integrated handles
•  Optional RapidRig™ frame with integrated
   pitch, roll and yaw adjustments
Weight (chassis only)
68 lbs (31 kg)
INPUT CAPABILITIESType
Composite
S-Video
Component
Interlaced/Std def Y, Cr/Pr, Cb/Pb, S
Graphics
Progressive RGB/Progressive Interlaced Hi def 
Y, Cr/Pr, Cb/PB 
RGBHV (Progressive)
Digital RGB   
Serial Digital 
SD/HD-SDI (SMPTE 259M/292M) 
DVI - High bandwidth
Dual - main
Dual - sub
*The main & sub dual DVI inputs can be used in   
parallel to support dual-pipe 3D connectivity 
Connector
BNC
4-pin mini DIN
BNCx4
BNCx5
D sub (15-pin)
DVI
BNC
DVI
DVI Quantity
1
1
1
1
1
1
1
1
1
Digital  Projection  International  (DPI),  Texas  Instruments’  first  DLP™  partner  and  the  orig-
inal innovator of the 3-chip DLP™ projector, proudly introduces the TITAN sx+ 3D family.
Weighing in at just 31 kgs/68 lbs. every TITAN 3D display employs the latest in sx+ dark 
chip,  3-chip  DLP™  technology  to  deliver  up  to  10,000  ANSI  lumens  and  up  to  4000:1 
contrast.  This award-winning compact chassis now includes four sx+ active 3D models. 
All  robustly  built  and  extremely  quiet,  TITAN  3D  projectors  are  the  perfect  imaging  solu-
tion  for  vital  immersive  applications  including:  military  simulation,  scientific  visualization, 
medical  and  geological  research,  product  engineering,  commercial  cinema  and  theme 
park attractions. 
In  addition  to  the  active  3D  capability,  TITAN  3D  models  also  include  DP’s  new 
FastFrame™  technology,  a  revolutionary  combination  of  hardware  and  firmware  that 
reduces  the  artifacts  and  image  blur  typically  associated  with  rapidly  moving  displayed 
content. The benefits of  FastFrame™ are especially important for simulation environments 
such as commercial and military flight training, and other applications where maintaining 
the visual integrity of high-speed imagery is vital.
For challenging 3D venues that require extreme mechanical rigging or precise mechanical 
alignment, the TITAN 3D products can be ordered with DP’s RapidRig™ flying and stack-
ing  frame.    The  RapidRig™  frames  provide  integrated  pitch,  roll  and  yaw  adjustments, 
simplifying installation and alignment accuracy. TITAN 3D models utilize the same lenses 
employed  across  the  rest  of  DPI’s  TITAN  and  LIGHTNING  product  range,  so  optical 
accuracy is always ensured. 
Other key benefits of the TITAN sx+ 3D models include: 
• High Bandwidth input >120Hz active stereoscopic DVI with no need for frame 
  doubling.  This capability extends the dynamic range up to 16 bit for improved 
  contrast  and color gamut. Both single-pipe and dual-pipe 3D sources are supported.
• Dual Flash Processing™ (DFP) – Enables distribution of 3D content via 60 Hz formats   
  by providing the option to frame-double the signal within the projector.  When this   
  option is selected, the input signal, having been processed and re-sized to map to
  the native resolution of the projector, will also be frame-doubled to 120 Hz, and the   
  doubled frames interleaved.  This produces imagery with the low flicker characteristics   
  of a native 120 Hz source, but without the infrastructure costs associated with 
  distributing and switching ultra-high bandwidth signals. 
• Projector electronics which provide an interface to drive an infrared transmitter to 
  synchronize switching glasses with active displayed frames.  The user can elect either   
  to pass through an external sync pulse, or to use the reference generated internally   
  by the projector.  Adjustments are provided to accommodate the phase and dead
  time characteristics of different switching glasses.
• FastFrame™ technology, a revolutionary combination of hardware and firmware that   
  provides user adjustments to vastly reduce the artifacts and image blur typically 
  associated with rapidly moving display content.  
• Minimal video delay from input to screen - as low as 1 frame.
• Eight user-selectable inputs, including HDCP-compliant DVI plus SD/HD-SDI.
• High bandwidth DVI inputs offer Single, Twin, Dual & Dual Twin DVI connectivity.
• Up to 16 Bit color for breathtaking image reproduction.
• DPI’s ColorMax™ calibration capabilities including enhanced seven-point color 
  correction for broader color space and precise color alignment.
• DPI’s CoolTek™ engineering, delivers the highest lumen performance with the lowest   
  power consumption, thermal (BTU) and noise level (dBA) output.
MultiBlend™  –  an  advanced  soft-edge  capability  for  seamlessly  meshing  arrays  of   
• 
  projectors to create displays with ultra-high resolution or unusual aspect ratios.
TITAN sx+ 3D Pro Series II displays - powerful tools for immersive large screen 
applications - bringing the precision of Digital Projection to your venue.
 sx+ Dual 3D 
						

							Native Color TemperatureHDTV Formats Supported Scan Rates Supported Remote Control
Automation Control
Operating/Storage Temperature Operating Humidity
Thermal Dissipation  Fan Noise
Power Requirements Power Consumption PARAMETERS
Projectors 
Part #TITAN sx+ 3D  109-340
TITAN sx+ 3D Ultra Contrast   109-341
TITAN sx+ Dual 3D  109-334
TITAN sx+ Dual 3D Ultra Contrast   109-335Accessories            Part #Single TITAN 3D Lamp & Housing* (2 required)      109-319
RapidRigTM Frame            107-956
TITAN sx+ 3D Series Adjustable Ceiling Mount      108-499
Infrared Remote (Replacement)        105-023
* Includes high-performance replacement air filter(s)
1 Based on 4-6 hour/day operational profile.  Venue and application conditions may impact actual lamp life.
  See Digital Projection’s Product Warranty Statement for details on lamp warranty.
  Installations requiring horizontal or vertical tilt orientations greater than 15 degrees may reduce the     
  actual operational hours of one of the two lamps.
ADVANCED TECHNICAL SPECIFICATIONS
TITAN sx+ 3D side panel
6500°K ±1000°K; white balance-adjustment: 3000°K to 10000°K
User selectable Xenon-like colorimetry using dynamic optical and electronic enhancement.
1080i (50Hz, 60Hz), 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080 24sf, 720p (50, 60Hz), 480i, 480p
Inputs 1-7: Horizontal: 15kHz to 100kHz / Vertical: 24Hz to 85Hz   -   Input 8: 3D progressive 576p up to 1080p @ 120Hz Addressable IR remote control, wireless and wired with loop-through / On board invertable keypad
 
 LAN connection via RJ45  / RS232 9-pin D type 
Operating: 0 to 40°C / Storage: -10 to 50°C /  20 to 80% non-condensing
 
  1,770 BTU/hr  2,777 BTU/hr
  Less than 42dBA {400}  Less than 45dBA {500}
100-240 VAC ±10%, 50/60Hz single phase 
  580 watts maximum  910 watts maximum
Lenses   HB Part #0.73:1   105-607
1.2:1    105-608
1.2:1 (short)    105-609
1.26 - 1.61:1    109-236
1.5 - 2.02:1    105-610
2.02 - 2.77:1    105-611
2.77 - 4.51:1    105-612
4.51 - 7.53:1    105-613
7.5 - 11.2:1    109-235
shown with optional rigging frame
DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD, SUITE 115  KENNESAW, GA. 30144 • T: 770.420.1350 • F: 770.420.1360 • www.digitalprojection.com
DIGITAL PROJECTION, LTD. • GREENSIDE WAY, MIDDLETON  MANCHESTER, UK. M24 1XX • T: +44.161.947.3300 • F: +44.161.684.7674 • www.digitalprojection.co.uk
DIGITAL PROJECTION, CHINA • TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG  DISTRICT  BEIJING, PR CHINA 100101 • T: +86.10.58239771• F: +86 10 58239770
DIGITAL PROJECTION,  ASIA • 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 • T: +65.6284.1138 • F: +65.6284.1238
Projector Dimensions
TITAN sx+ 3D Pro Series II
498.519.6543.5
21.4
216.9
8.5
146.95.8
619.524.4
581.4 22.9
45.0
1.8645.4
25.4
253.5 10.0
220.1 8.7
33.4 1.3
(Single Lamp Models)
(Dual Lamp Models) sx+ Dual 3D
Projector dimensions (in)
L1 25.4   W1 21.4   H1 10
Projector dimensions (mm)
L1 645.4   W1 543.5   H1 253.5 
TMCORE TECHNOLOGY