Digital Projection Titan 800 Sx+, Titan 800 1080p, Titan800 Wuxga Specifications

							Overview
PERFORMANCE SPECIFICATIONS
Brightness (±10%)SX+, 1080p & WUXGA: 12,000 ANSI Lumens 
Contrast Ratio (±10%)2000:1 Full White/Black
Display TypeSX+: .95” Darkchip DMD1080p: .95” Darkchip DMDWUXGA: .97” Darkchip DMD
DMD SpecificationSX+: 1400 x 1050 pixels native, +/- 12 deg tilt angle1080p: 1920 x 1080 pixels native, +/-12 deg tilt angleWUXGA: 1920 x 1080 pixels native, +/-12 deg tilt angleFast transit Pixels for smooth greyscale and improved contrast.
Fill Factor87%
Sealed Optics at DMD™ InterfaceProtects DMD’s™ from optical contamination
Source CompatibilityAdvanced Front End Processor:•	 3GSDI	including	1080p	60fps,	24p	(4:4:4	 and	4:2:2)	 and	1080i.•	 HDMI	 including	 Deep	Color	processing.•	 Graphics 	standards 	up 	to 	1920 	x 	1200 	resolution 	at 	60fps 	via 	DVI 			 or	 VGA.•	 Component	 video	(SD	and	 HD)	 via	YPr	 Pb,	RGB,	 or	RGBS.•	 S-Video	 (PAL,	NTSC	 &	SECAM)•	 Composite	 Video	(PAL,	NTSC	 &	SECAM).
High	 bandwidth,	 pixel	mapped	 path:•	 Dual	DVI	accepts	 graphics	 standards	 up	to	1920	 x1200@120fps.•	 HDMI	 1.4	including	 3D	Standards•	 Dual	 Pipe	(2	x	DVI	 or	HDMI)
High	 Bandwidth	 Input•	3D	 capable	 (option	available) •	Pixel	 Mapped	 -	with	 low	latency•	FastFrame™	 Motion	Blur	Reduction •	120	 Hz	with	 no	frame	 doubling 	
3D	Sync	 (for	3D-capable	 models)Sync In - External lockSync Out - Shutter glass control  Network	ConnectionIR	handset	 with	wired	 option	 via	3.5mm	 jack	(with	 loop	through).LAN	Via	RJ45	 with	full	feature	 set	via	protocol.Duplication	 of	OSD	 served	 from	projector	 controller	 via	RJ45.RS232	 Via	9	Pin	 connector.
Lamp TypeTwo	 x	400W	 High	Intensity	 Discharge
Lamp Life (typical)1Full	Power:	 1500	hrs	(up	 to	3000	 hrs	in	lamp	 sequential	 mode)	Eco	Mode	 :	2000	 hrs	(up	 to	4000	 hrs	in	lamp	 sequential	 mode)
Intelligent Lens MountMotorised	 and	programmable	 Focus,	Zoom,	and	Vertical	and	Horizontal	 offsets	with	ten	positional	 memory	banks.
Lens Shift (maximum)sx+ models: 0.73:1	lens	–	Vert:	 +/-	0.11	 frame;	 Hor:	+/-0.07	 frame1.26-1.61:1	 lens	-	Vert:	 +/-	0.36	 frame;	 Hor:	+/-0.2	 frame1.2:1	and	other	 zoom	 lenses	 -	Vert:	 +0.5,	 -0.4	frame;	 Hor:	 +/-0.2	 frame
1080p and WUXGA models:0.67:1	lens	–	Vert:	 +/-	0.1	frame;	 Hor:	+/-0.1	 frame1.16-1.49:1	 lens	-	Vert:	 +/-	0.5	frame;	 Hor:	+/-0.18	 frame1.12:1	and	other	 zoom	 lenses	 -	Vert:	 +0.7,	 -0.5	frame;	 Hor:	 +/-0.18	 frame
Lens Options0.73	 :1 fixed	 2.02-2.77	 :1	 zoom1.2	 :1		fixed	 2.77-4.51	 :1	 zoom1.26-1.61	 :1	zoom	 4.51-7.53	 :1	 zoom1.5-2.02	 :1	zoom	 7.5-11.2	 :1	 zoom
•	1.2:1	 Lenses	 include	 manual	 aperture•		High-contrast	 lenses	available	 for	0.73:1				and	 all	zoom	 lenses
Specifications subject to change without notice   DP V1.0 01/2012   ©2012 Digital Projection International™DLP, Digital Light Processing and DMD are trademarks of Texas Instru\
ments, Inc.
TITAN 800 Series
TITAN 800 SX+  •  TITAN 800 1080p  •  TITAN 800 WUXGA
Mechanical Mounting•		Front	 or	rear	 table;		 Front	or	rear	 ceiling	   (ceiling mount optional)•		Rugged,	 staging	tolerant	 chassis	with   integrated handles•	Optional	 RapidRig™	 frame	with	integrated			pitch,	 roll	and	 yaw	 adjustments
Weight (chassis only)39	kg,	 86	lbs
Video	 Processing:	 Advanced	Front	End	processor:•	 Advanced	 geometry	correction:		 o	Accurate	 warp	map	generation	 by	adjustment	 of	an	interpolated	 grid	array	 of	up	 to	16	 x	16	 nodes.		 Up	to	eight	 maps	 can	be	generated,	 downloaded	 and	stored	on	the	 projector	 for	selection	 via	the	 OSD	 or	control application. o On board implementation of Pincushion & Barrel, Cornerstone,	 Vertical	&	Horizontal	 Keystone,	and	Image Rotation.•	 High	Quality	Edge	Blending	 &	Multi	 Projector	 Tiling	 o	High	 bit	depth	 processing	 in	blend	 region	 to	ensure smooth image.	 o	Adjustable	 S-Curve	Parameter	 and	degamma	functions. o Black Level Uplift to ensure uniformity across blend in dark images. o Correction of black level uplift to compensate for non-active pixels at the edge of the DMD.	 o	 The	user	 can	choose	 to	assign	 the	projector	 a	position	within	an	image	 matrix.		 The	video	 processing	can automatically extract the appropriate segment of the input image and enable blending for the appropri-ate edges.•	 Single	 Stage	Scaling	 o	Resizing	 and	Warp	 functions	 are	carried	 out	in	a	single	 stage	process	 maximizing	 the	clarity	 of	the	resulting	 image.	When	operating	 Blend	in	conjunction	with	 Warp	 the	processing	 will	automatically	 superim-pose	the	warped-blend	 map,	onto	the	geometrically	corrected image.	 o	 The	user	 can	switch	 between	 different	sources	and input aspect ratios, yet retain the accuracy of the geometrically corrected output.•	 PIP/POP/PAP		 o	User’s	 choice	 between	 inputs	for	the	 main	 and	sub images (Picture in Picture or PIP).  The processing additionally	 offers	the	option	 to	display	 two	sources,	side-by	 side,	scaled	 to	the	 vertical	 size	of	the	 panel	Picture and Picture or PAP), or alternatively maintain-ing their original aspect ratios (Picture Opposite Picture or POP).•	 ColorMax	 o	 Each	 projector	 is	accurately	 calibrated	at	the	factory	 with	its	native	 primary	 colors	and	white	 point	being stored in the on-board memory. User’s choice to	employ	 the	external	 control	application	 to	download	his	 own	 measured	 color	space,	 as	specific	 to	the	 oper-ating environment, and also his preferred Target color space for primary and secondary colors.  Not only is this the most flexible color management technology available, but it also enables accurate matching of pro-jectors	 in	tiled	 or	blended	 applications.		•	 Dual	Flash	Processing	 can	be	used	 to	multiply	 the	displayed	 frame	rate	for	3D	 sources.	•	 FastFrame	 motion	blur	reduction.•	 Dual	 Pipe	processing	 allows	the	delivery	 of	two	sources in parallel, typically one for the Left Eye and the other for the Right.  •	 De-interlacing,	 Video	enhancement	 and	Frame	DelayThe	projector	 automatically	 detects	interlaced	 video	and	implements	 3:2	or	2:2	 extraction	 as	appropriate,	with	 pixel	 based,	 motion	 adaptive	 interpolation	 and	auto cadence correction.
INPUT CAPABILITIES
Digital	Projection	 International	 presents	a	revolution	 in	advanced 	
3-chip	DLP	displays	 with	the	new	 TITAN	 800	product	 line.	Incredibly 	
compact and efficient for its lumen performance, the TITAN 800 
series incorporates DPI’s advanced image Warp and Blend, 
Intelligent Lens Mount, ColorMax calibration technology, optional 
active	3D	connectivity,	 and	a	host	 of	vital	 professional	 features	
to suit almost any commercial installation or staging application 
imaginable. 
As efficient as they are capable, the introduction of the 12,000 
lumen TITAN 800 lineup marks another milestone in high bright-
ness,	in	a	chassis	 size	more	 akin	to	lower-lumen	 displays.	 	The	
new	 TITAN	 800	projectors	 are	available	 in	SX+,	 1080p	 and	WUXGA 	
native	resolution,	 and	include	 powerful	 DPI	innovations	 such	as	
FastFrame, Dual-Flash Processing and CoolTek Engineering.  The 
TITAN	 800	extends	 DPI’s	powerful	 TITAN	product	 line,	the	most 	
powerful	 and	efficient	 displays	 available.
Utilizing	 DPI’s	new,	advanced	 electronics,	 all	TITAN	 800	models 	
provide	 the	user	 with	advanced	 Warp	and	Blend	 capabilities, 	
including	the	ability	 to	make	 extensive	 geometric	 warp	correction 	
for	screens	 with	complex	 geometry.		 Superbly	capable	edge	blend-
ing	and	 multi-projector	 tiling	is	provided	 by	way	 of	high	 bit	depth 	
processing that ensures a seamless, contiguous image can be cre-
ated	from	 multiple	 projectors.	 	 Additionally,	 end	users	 can	choose 	
to	utilize	 the	TITAN	 800’s	onboard	 tiling	function	 by	assigning	 each	
projector	 a	position	 within	an	image	 matrix.	 The	video	 processing 	
then automatically extracts the appropriate segment of the input 
image and enables blending for the appropriate edges.  
Also	included	 in	the	 3D-capable	 TITAN	800s	are	DPI’s	 exclusive	 3D	
advances that further extend the remarkable flexibility engineered 
within	 each	TITAN	 800	display.	 	 Applications	 with	120	Hz	native 	
sources	 utilize	the	High	 Bandwidth	 Input,	eliminating	 the	need	 for	
frame	 doubling.	 For	60	Hz	 3D	 applications,	 DPI’s	built-in	 Dual	Flash 	
Processing™	 enables	distribution	 of	3D	 content	 via	60	Hz	 formats 	
by	frame-doubling	 the	signal	 within	the	projector,	 producing	 the	
low	 flicker	 image	 characteristics	 of	a	native	 120	Hz	source	 without	
the	infrastructure	 costs	associated	 with	distributing	 and	switching 	
ultra-high	 bandwidth	 signals.		
As	is	the	 case	 with	all	Digital	 Projection	 displays,	our	careful	 engi-
neering	 guarantees	 TITAN	projectors	 provide	remarkable	 resolu-
tion,	color	 saturation	 and	light	 output	 for	years	 to	come.	 Equally 	
important, DPI’s legacy in providing superior customer and techni-
cal	services	 assures	our	experienced	 support	staff	is	always	 avail-
able to address your needs.
TypeCompositeS-VideoHDMI	(HDCP	 compliant)ComponentInterlaced/Std	 def	Y,	Cr/Pr,	 Cb/Pb,	 SGraphicsProgressive	 RGB/Progressive	 Interlaced	Hi	def	Y,	Cr/Pr,	 Cb/PB	RGBHV	 (Progressive)Digital RGB   Serial Digital SD/HD-SDI	 (SMPTE	259M/292M) DVI	-	High	 bandwidthDual - mainDual - sub*The	 main	 &	sub	 dual	 DVI	inputs	 can	be	used	 in	 parallel	 to	support	 dual-pipe	 3D	connectivity	
ConnectorBNC4-pin mini DINHDMI	 1.4
BNCx4
BNCx5D sub (15-pin)DVI
BNC
DVIDVI
Quantity112
1
1
11
1
11
PRELIMINARY
1080pWUXGAsx+ 
						

							Native Color Temperature
HDTV Formats Supported
Scan Rates Supported
Remote Control
Automation Control
Operating/Storage Temperature
Operating Humidity
Thermal Dissipation 
Fan Noise
Power Requirements
Power Consumption
PARAMETERS
Projectors    Part #TITAN 800 sx+     TBATITAN 800 1080p     TBATITAN 800 WUXGA      TBA
Accessories     Part #TITAN 800 Lamp & Housing* (2 required)    TBARapidRigTM Frame     TBA TITAN 800 Series Adjustable Ceiling Mount    TBAInfrared Remote (Replacement)      105-023* Includes high-performance replacement air filter(s)
1 Based on 4-6 hour/day operational profile.  Venue and application condit\
ions may impact actual lamp life. See Digital Projection’s Product Warranty Statement for details on la\
mp warranty. Installations requiring horizontal or vertical tilt orientations greater\
 than 15 degrees may reduce the actual operational hours of one of the two lamps.
ADVANCED TECHNICAL SPECIFICATIONS
SX+ Lenses  HB Part #  HC Part #0.73:1 105-607 107-1951.2:1 105-608 105-6081.2:1 (short) 105-609  105-6091.26 - 1.61:1 109-236  109-3591.5 - 2.02:1 105-610  107-1962.02 - 2.77:1 105-611  107-1972.77 - 4.51:1 105-612  107-1984.51 - 7.53:1 105-613  107-1997.5 - 11.2:1 109-235  109-358
shown with optional rigging frame
DIGITAL PROJECTION, LTD. • GREENSIDE WAY, MIDDLETON  MANCHESTER, UK. M24 1XX • T: +44.161.947.3300 • F: +44.161.684.7674 • www.digitalprojection.co.ukDIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD, SUITE 115  KENNESAW, GA. 30144 • T: 770.420.1350 • F: 770.420.1360 • www.digitalprojection.comDIGITAL PROJECTION, CHINA • TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG  DISTRICT  BEIJING, PR CHINA 100101 • T: +86.10.58239771• F: +86 10 58239770DIGITAL PROJECTION,  ASIA • 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 • T: +65.6284.1138 • F: +65.6284.1238
Projector Dimensions
TITAN 800 Series
Projector	dimensions	 (in)L1	24.4			 W1	21.3			 H1	10.2
TMCORE TECHNOLOGY
Projector	 dimensions	 (mm)L1	620			 W1	540			 H1	258
Native	 Color	Temperature:	 User	Selectable	 from	3200K,	 to	10000K
Signal	 formats	 480i,	576i	480p,	 576p,	720p,	1080i	(50,	59.94	 and	60Hz)	 and	1080p	 (23.98,	 24,	25,	29.97	 and	30Hz).
The	3GSDI	 Input	supports	 SD-SDI,	HD-SDI	and	3G-SDI	 YCbCr	4:2:2	serial	 digital	 component	 video.		SMPTE	 292M,	SMPTE	259M-C	 and	SMPTE	 424M	compliant.		 Accepts	484i,	576i,	720p,	 1080i	and	1080p	 Single	 link	formats	 at	270Mb,	 1.485Gb	 or	2.97Gb	rates.	Stream	 A	&	 Stream	 B-switchable.HDMI	&	DVI	 Inputs	 -	HDMI	 1.3	with	 or	without	 HDCP,	36	bit	video	 compatible.DVI-D	 input	with	or	without	 HDCP.
Addressable	 IP	remote	 control,	 wireless	 and	wired	 with	loop	 through.		 On	Board	 keypad.
LAN	connection	 via	RJ45/RS232	 9	pin	 D	Type.
Operating 0-40C.  Storage -10 to +50C
20 to 80% non-condensing
7161	 BTU/hr
TBA
200-265VAC		 50/60Hz	Single	Phase.
TBA
1080p & WUXGA Lenses  HB Part #  HC Part #0.67:1 105-607 107-1951.12:1 105-608 105-6081.16 - 1.49:1 109-236  109-3591.39 - 1.87:1 105-610  107-1961.87 - 2.56:1 105-611  107-1972.56 - 4.16:1 105-612  107-1984.16 - 6.96:1 105-613  107-1996.92 - 10.36:1 109-235  109-358
PRELIMINARY
1080pWUXGAsx+