Digital Projection Titan 1080p-500, Titan 1080p-600 Specifications

							Specifications subject to change without notice   DP V2.0 06/07  ©2007 Digital Projection, Inc.
™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc.
INPUT CAPABILITIES
TITAN Pro Series II
Over view
PERFORMANCE SPECIFICATIONS
Brightness (±10%)1080p-500: 5,500 ANSI Lumens
1080p-600: 10,000 ANSI Lumens
Contrast Ratio (±10%)
2000:1
Display Type3 x .95” Dark Metal 1080p DMD™ with 
Fast Transit Pixels for smooth 
greyscale and improved contrast
DMD Specification1920 x 1080 pixels native, 12˚ tilt angle
Fill Factor87%
Sealed Optics at DMD™ InterfaceProtects DMD’s™ from optical contamination
Source Compatibility•  Composite, s-video, and color difference 
video standards 
• RGB graphics standards up to 1920 x 
1080 
• DVI standards
• High definition RGB and color difference 
standards
Video Processing• Enhanced 7 point color correction
• Xenon Color Mode - User selectable yellow 
notch filter and xenon-color mode 
processing, enable the projector to closely 
replicate xenon lamp spectral performance. 
• Class leading Video de-interlacing/processing
of SD and HD sources using auto 3:2 and 
2:2 extraction, ruggedized for editing 
discontinuities
• Pixel-based motion adaptive interpolation
• User selectable preset, parametric 
de-gamma and user downloadable 
de-gamma
• Frame Delay: as low as 1 frame, source 
dependant
• Auto mode selection - plug and play setup
Network ConnectionLAN via RJ 45, Wireless 802.11b,
full protocol feature set
Lamp Type1080p-500: Twin High Intensity Discharge
module (2 x 250W lamps)
1080p-600: Dual High Intensity Discharge
modules (2 x 300W lamps)
Lamp Life(typical)11080p-500: 1500 hours dual lamp mode,
3000 hours single lamp mode
1080p-600: 2000 hours dual lamp mode,
4000 hours single lamp mode
Lens MountZoom: Motorized horizontal and vertical lens
shif t, zoom and focus, Fixed: Manual Focus.
Lens Shift (maximum)Zoom Lenses:
Vert: ±0.5 frame 
Hor: ±0.25(L) 0.17(R) frame
0.73 Fixed lens: 
Vert: ±0.11 frame; Hor: ±0.07 frame
Lens Options0.67 :1 fixed
1.12         :1  fixed (1.2-2.0m throw)
1.12         :1  fixed (3-15m throw)
1.39-1.87 :1 zoom
1.87-2.56  :1 zoom
2.56-4.16  :1 zoom
4.05-6.46 :1 zoom
• 1.2:1 Lenses include manual aperture
• High-contrast lenses available for 0.67:1
and all zoom lenses
Mechanical Mounting• Front or rear table;  Front or rear ceiling
(ceiling mount optional)
• Rugged, staging tolerant chassis with
integrated handles
• Opt. rigging /stacking frame with -
integrated pitch, roll and yaw adjust-
ments
Weight (chassis only)1080p-500:59.5 lbs (27 kg)
1080p-600: 68 lbs (31kg)
Digital Projection International (DPI), Texas Instruments'
first DLP™ partner and the original innovator of the 3-chip
DLP™ projector, proudly introduces the newest of our
compact 1080p Pro Series II Displays, the TITAN Pro
1080p-500 and 1080p 600.
Weighing in at just 59.5 and 68 lbs., the twin-lamp TITAN
1080p-500 and dual lamp 1080p 600 employ the latest in
Texas Instruments' 1080p dark metal, 3-chip DLP™ tech-
nology to deliver up to 10000 lumens and 2000:1 con-
trast.  Compact, robustly built and ultra-quiet for their
performance class, TITANs are unmatched solutions for
staging, command and control, visualization, business,
and educational venues.  For staging, the TITAN can be
ordered with DP's RapidRig flying and stacking frame,
which provides integrated pitch, roll and yaw adjust-
ments, simplif ying installation and alignment accuracy.
Other key benefits of the TITAN 1080p-500 and 1080p
600 include:
• DP’s NextGen electronics, featuring class leading de-interlacing
with SD and HD sources processed using auto 3:2 and 2:2
extraction   
• Minimal video delay from input to screen - as low as 1 frame,
depending on source 
• Sealed optics to protect DMD's and other focal plane compo-
nents from airborne contaminants  
• Six user-selectable inputs, including HDCP compliant DVI  
•  ColorMax calibration capabilities including enhanced seven-point
color correction for broader color space and accurate color align-
ment
• User selectable Xenon-color mode processing, which enables
the projector to closely replicate the spectral performance of a
Xenon lamp
• Twin (1080p-500) or Dual (1080p-600) high intensity discharge
lamps, which can be run individually or simultaneously, with a
typical life of 1500 hours per lamp
• A range of precision optics with extended lens shif t, compatible
with all TITAN and LIGHTNING sx+ and 1080p models 
• DP’s CoolTek engineering, which delivers the highest lumen per-
formance with the lowest thermal (BTU) and noise level (dB) out-
put. 
The TITAN 1080p-500 and 1080p-600, Pro Series II dis-
play priced and sized for every venue and everyday use -
bringing the precision of Digital Projection to your venue.
Type
Composite
S-Video
Component
Interlaced/Std def Y, Cr/Pr, Cb/Pb, S
Graphics
Progressive RGB/Progressive Interlaced
Hi def Y, Cr/Pr, Cb/PB 
RGBHV (Progressive)
Digital RGB   Connector
BNC
4-pin mini DIN
BNCx4
BNCx5
D sub (15-pin)
DVIQuantity
1
1
1
1
1
1
TITAN 1080p-500 • TITAN 1080p-600 
						

							DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD. SUITE 115. KENNESAW. GA. 30144 • T-770.420.1350 • F-770.420.1360 • www.digitalprojection.com
DIGITAL PROJECTION, LTD. • GREENSIDE WAY. MIDDLETON. MANCHESTER. UK. M24 IXX • T-+44.161.947.3300 • F-+44.161.684.7674 • www.digitalprojection.co.uk
Projectors Part #TITAN 1080p-500 106-241
TITAN 1080p-600 107-302
1 Based on 4-6 hour/day operational profile.  Venue and application conditions may impact actual lamp life.
See Digital Projection’s Product Warranty Statement for details on lamp warranty.
Lenses HB Part # HC Part#0.67:1 105-607 107-195
1.12:1 105-608 105-608
1.12:1 (short) 105-609 105-609
1.39 - 1.87:1 105-610 107-196
1.87 - 2.56:1 105-611 107-197
2.56 - 4.16:1 105-612 107-198
4.05 - 6.46:1 105-613 107-199
PARAMETERS
ADVANCED TECHNICAL SPECIFICATIONS
TITAN 1080p-600 side panel
Shown without optional rigging / stacking
frame
TITAN Pro Series II
Projector dimensions (in)
L1 22.1   W1 20.7   H1 10 
Projector dimensions (mm)
L1 560.5   W1 525   H1 253.5Projector dimensions (in)
L1 26   W1 21.5   H1 10 
Projector dimensions (mm)
L1 661.23   W1 547   H1 253.5500 Series600 Series Projector Dimensions
Accessories Part #Twin 250 Watt Lamp & Housing 001-742
300 Watt Lamp & Housing* (2 required) 107-694
300 Watt Lamp & Housing* (twin pack) 107-695
RapidRig
TMFrame 104-623
TITAN Adjustable Ceiling Mount 105-021
Infrared Remote (Replacement) 105-023
* Includes high-performance replacement air filter
Native Color Temperature
HDTV Formats Supported
Scan Rates Supported
Remote Control
Automation Control
Operating/Storage Temperature
Operating Humidity
Thermal Dissipation 
Fan Noise
Power Requirements
Power Consumption7500°K ±1000°K; white balance-adjustment: 3000°K to 10000°K
User selectable Xenon-like colorimetry using dynamic optical and electronic enhancement.
1080i (50Hz, 60Hz), 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080 24sf, 720p (50, 60Hz), 480i, 480p
Horizontal: 15kHz to 100kHz / Vertical: 24Hz to 85Hz
Addressable IR remote control, wireless and wired with loop-through / On board invertable keypad
LAN connection via RJ45  / RS232 9-pin D type 
Operating: 0 to 40°C / Storage: -10 to 50°C
20 to 80% non-condensing
2,600 BTU/hr 2,900 BTU/hr
Less than 42dBA
100-240 VAC ±10%, 50/60Hz single phase 
750 watts 850 watts maximum 
						

							


Superior Battery
Superior BatterySuperior Battery Superior Battery



Management
ManagementManagement Management



HP UPS HP 3 PHASE UPS incorporates Enhanced Battery Management: an exclusive, patented



technology that doubles battery service life, optimizes battery recharge time, and provides advance notice



of pending battery failure. With Enhanced Battery Management, you have a lower total cost of ownership



and receive the best in the industry protection for your critical equipment.



Ease of serviceability
Ease of serviceabilityEase of serviceability Ease of serviceability



through hot-swappable
through hot-swappablethrough hot-swappable through hot-swappable



batteries and electronics
batteries and electronicsbatteries and electronics batteries and electronics



modules.
modules.modules. modules.



The HP 3 PHASE UPSs have a modular design architecture, consisting of separate, hot swappable battery



and electronics modules. Further, a built-in intelligent automatic bypass feature ensures continuous



power to your connected load even while the modules are being replaced. Ease of maintenance and



serviceability



Faster time to repair (MTTR)



Automatic and manual bypass



Increased flexibility through modular design



Increase battery back-up
Increase battery back-upIncrease battery back-up Increase battery back-up



time with up to four
time with up to fourtime with up to four time with up to four



Extended Runtime
Extended RuntimeExtended Runtime Extended Runtime



Modules
ModulesModules Modules



HP 3 PHASE UPS supports a maximum of four Extended Runtime Modules (ERM), to further increase your



battery back-up time, should you have a sudden brief power outage. Each ERM is 3U high and can be



automatically detected and configure when attached to the UPS. For more information on battery back



up times, please refer to the Back-up Times Chart.



Multiple management
Multiple managementMultiple management Multiple management



options increase flexibility
options increase flexibilityoptions increase flexibility options increase flexibility



The HP 3 Phase UPS systems can bee fully configured and monitored from the front management LCD.



For remote management HP Power Manager software is included at no charge and the optional UPS



Management Module provides additional features such as out of band communications with up to 5



servers and UPS clustering for redundancy.



Remote Emergency Power
Remote Emergency PowerRemote Emergency Power Remote Emergency Power



Off Feature
Off FeatureOff Feature Off Feature



The HP 3 Phase UPS includes an isolated REPO (Remote Emergency Power Off) port. The REPO feature



allows the power to the UPS outlets to be switched off from a remote location. For more information,



refer the HP 3 Phase UPS users manual.



UPS Management Module
UPS Management ModuleUPS Management Module UPS Management Module



The optional HP UPS Management Module enables you to monitor and manage power environments



through comprehensive control of HP UPSs. The HP UPS Management Module can support either a



single UPS configuration or provides additional power protection with support for dual redundant UPS



configuration for no-single-point-of-failure. The additional serial ports will provide greater power



management control and flexible monitoring.



The management module can be configured to send alert traps to HP Systems Insight Manager and other



SNMP management programs or used as a standalone management system. This flexibility enables you



to monitor and manage UPSs through the network. To facilitate day-to-day maintenance tasks, the



embedded management software provides detailed system logs.



The HP UPS Management Module provides remote management of a UPS by connecting the UPS directly



to the network. Configuration & Management of the UPS from anywhere and at anytime via a standard



web browser.






NOTE: 
NOTE: NOTE:  NOTE: 



For more information on the UPS Management Module please see



http://h18004.www1.hp.com/products/servers/proliantstorage/powerprotection/



software/module/ups/index.html






QuickSpecs



HP Rackmountable 3 Phase Uninterruptible Power
HP Rackmountable 3 Phase Uninterruptible PowerHP Rackmountable 3 Phase Uninterruptible Power HP Rackmountable 3 Phase Uninterruptible Power



Systems
SystemsSystems Systems



Product Highlights



DA - 12857   Worldwide — Version 1 — November 12, 2007

Page 3 
						

							


Warranty
WarrantyWarranty Warranty



Standard three year warranty with first year including parts and labor. HP UPSs are backed by a



standard three year limited warranty; 3 year parts, 1 year Labor, 1 year onsite. Optional UPS HP



Care Pack and packaged services are also available for purchase. You can choose the precise



level of support based on your needs, from basic to business critical.



Pre-Failure Battery Warning and its associated Warranty.



The Pre-Failure Battery Warning is proactively detected and notified by a LED indicator light,



showing that the battery needs to be replaced. This notice is given 30 days prior to the battery



failure. This indicator provides ample time to order a spare battery (1-800-OK-COMPAQ). Avoid



storing battery spares as a back up because of short shelf life of the battery. The battery warranty



coverage is 3 years for parts. The warranty for the first year of ownership includes parts and labor.






Warranty, standard on all HP Uninterruptible Power System (UPS) units, extends the advantage of a



HP three-year limited warranty by applying it to the battery before it actually fails. Specifically, the



Pre-Failure Battery Warranty ensures that when customers receive the notification from their HP



UPS that the battery may fail, the battery is replaced free of charge under the warranty. HP



maintains the highest standards in the industry, as evidenced by the HP Pre-Failure Battery



Warranty.



In addition, HP UPSs are covered by a $250,000 equipment protection guarantee. Should your



connected equipment get damaged due to a UPS failure, then your damaged equipment is



covered to up to $250,000.



NOTE: 
NOTE: NOTE:  NOTE: 



The $250,000 Equipment Protection Guarantee is offered only in North America.



HP Care Pack Services
HP Care Pack ServicesHP Care Pack Services HP Care Pack Services



HP Care Pack Services include HP branded hardware options qualified for the server, purchased at the



same time or afterwards, internal to the enclosure, as well as 22 and smaller external monitors and rack



mounted UPS options. HP Uninterruptible Power Systems will be covered at the same service level and



coverage period as the server. For servers or storage systems installed within a rack, service also covers



all HP qualified rack options installed within the same rack.



NOTE: 
NOTE: NOTE:  NOTE: 



For more information on HP Care Pack services, contact any of our worldwide sales offices or



resellers or visit our worldwide Web site on the internet at: 



http://www.hp.com/hps/carepack






NOTE: 
NOTE: NOTE:  NOTE: 



For more complete information on HP Services offerings, customers and resellers, please visit us



at: 



http://www.hp.com/hps






NOTE: 
NOTE: NOTE:  NOTE: 



Additional information regarding worldwide limited warranty and technical support is available



at: 



http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html






NOTE: 
NOTE: NOTE:  NOTE: 



The information contained herein is subject to change without notice and is provided as is



without warranty of any kind.



NOTE: 
NOTE: NOTE:  NOTE: 



The warranties for HP products and services are set forth in the express limited warranty



statements accompanying such products and services.



QuickSpecs



HP Rackmountable 3 Phase Uninterruptible Power
HP Rackmountable 3 Phase Uninterruptible PowerHP Rackmountable 3 Phase Uninterruptible Power HP Rackmountable 3 Phase Uninterruptible Power



Systems
SystemsSystems Systems



Service and Support, HP Care Pack, and Warranty Information



DA - 12857   Worldwide — Version 1 — November 12, 2007

Page 4 
						

							


Extended Runtime Module
Extended Runtime ModuleExtended Runtime Module Extended Runtime Module






Extended Runtime Module (WW)



NOTE: 
NOTE: NOTE:  NOTE: 



HP 3 PHASE UPS supports a maximum of four Extended Runtime Modules



(ERM), to further increase your battery back-up time. Each ERM is 3U high and can be



automatically detected and configure when attached to the UPS. For more information



on battery back up times, please refer to the Back-up Times Chart.






AF434A



UPS Management Module
UPS Management ModuleUPS Management Module UPS Management Module






HP UPS Management Module



NOTE: 
NOTE: NOTE:  NOTE: 



For more information on the UPS Management Module please see



http://h18004.www1.hp.com/products/servers/proliantstorage/powerprotection/



software/module/ups/index.html






AF401A



Serial Adapter
Serial AdapterSerial Adapter Serial Adapter






HP Serial Adapter RJ45-DB89 DCE Female 5pk



NOTE: 
NOTE: NOTE:  NOTE: 



The serial adapters allow direct (serial) connections to up to 5 servers with the



UPS Management Module for out of band communications in the event of a power



failure.






AF402A



Rackmount Power
Rackmount PowerRackmount Power Rackmount Power



Distribution Units (PDUs)
Distribution Units (PDUs)Distribution Units (PDUs) Distribution Units (PDUs)



and PDU options
and PDU optionsand PDU options and PDU options






North America/Japan
North America/JapanNorth America/Japan North America/Japan






8.6 kVA 3F Modular PDU (core only) with L15-30 inlet cord and 6 x IEC C19 outlets



AF512A



8.6 kVA 3F Monitored PDU model S1324 with one L15-30 inlet cord, and 36 IEC C-



13 plus 3 IEC C19 outlets



AF504A



 



17.3 kVA 3F Monitored PDU model S2324 with two L15-30 inlet cords, and 72 IEC



C-13 plus 6 IEC C19 outlets



AF503A



 



NOTE: 
NOTE: NOTE:  NOTE: 



The HP R8000/3 UPS can support one AF512A or AF504A. The HP



R12000/3 UPS can support two AF512A or AF504A or one AF503A.



 



International
InternationalInternational International






 



11 kVA 3F Modular PDU (core only) with IEC309 416P6 (16A) inlet cord and 6 x IEC



C19 outlets



AF513A



 



11 kVA 3F Monitored PDU model S1316 with one IEC309 416P6 (16A) inlet cord



and 36 IEC C-13 plus 3 IEC C19 outlets



AF508A



 



22.1 kVA 3F Monitored PDU model S2316 with two IEC309 416P6 (16A) inlet cords



and 72 IEC C-13 plus 6 IEC C19 outlets



AF507A



 



NOTE: 
NOTE: NOTE:  NOTE: 



The HP R8000/3 UPS can support one AF513A or AF508A.



The HP R12000/3 UPS can support two AF513A or AF508A or one AF507A.



 



PDU Management Module



NOTE: 
NOTE: NOTE:  NOTE: 



For more information on the PDU Management Module please see



http://h18004.www1.hp.com/products/servers/proliantstorage/



powerprotection/pdu.html






AF400A



PDU Extension Bars
PDU Extension BarsPDU Extension Bars PDU Extension Bars



 (PDU



options)



HP C-13 PDU Extension Bar Kit, pair



NOTE: 
NOTE: NOTE:  NOTE: 



Each extension bar has a C-20 input cord and 7 x C-13 receptacles.



AF500A



HP Fixed Cord Extension Bar Kit, pair



NOTE: 
NOTE: NOTE:  NOTE: 



Each extension bar has a C-20 input cord and 7 attached 13 inch C-13



power cords for use with 1U servers






351655-B21



 



NOTE: 
NOTE: NOTE:  NOTE: 



Extension bars may be used with any HP PDU that has C-19 outlets



QuickSpecs



HP Rackmountable 3 Phase Uninterruptible Power
HP Rackmountable 3 Phase Uninterruptible PowerHP Rackmountable 3 Phase Uninterruptible Power HP Rackmountable 3 Phase Uninterruptible Power



Systems
SystemsSystems Systems



Related Options



DA - 12857   Worldwide — Version 1 — November 12, 2007

Page 5 
						

							


HP Power Cables
HP Power CablesHP Power Cables HP Power Cables






10A, IEC320 C-14 to IEC320 C-13 Cables, 4.5ft (1.37m), 15 pack



142257-007



10A, IEC320 C-14 to IEC320 C-13 Cables, 4.5ft (1.37m), single 15 pack



142257-006



 



10A, IEC320 C-14 to IEC320 C-13 Cables, 1.6ft (0.5m), single pack



142257-B28



 



16A, IEC320 C-19 to IEC320 C-20 Cables, 8ft (2.5m), single pack



295633-B22



 



16A, IEC320 C-19 to IEC320 C-20 Cables, 6.5ft (2m), single pack



AF574A



 



16A, IEC320 C-19 to IEC320 C-20 Cables, 4ft (1.2m), single pack



AF575A



 



16A, IEC320 C-19 to IEC320 C-20 Cables, 3ft (1m), single pack



E7798A



 



NOTE: 
NOTE: NOTE:  NOTE: 



For more information on HP power cords please go to:



ftp://ftp.compaq.com/pub/products/servers/ProLiantstorage/



power-protection/power-cord-option-kits.pdf






 



Service and Support
Service and SupportService and Support Service and Support



Offerings
OfferingsOfferings Offerings






(HP Care Pack Services)



Hardware Installation (Electronic)



U4696E



QuickSpecs



HP Rackmountable 3 Phase Uninterruptible Power
HP Rackmountable 3 Phase Uninterruptible PowerHP Rackmountable 3 Phase Uninterruptible Power HP Rackmountable 3 Phase Uninterruptible Power



Systems
SystemsSystems Systems



Related Options



DA - 12857   Worldwide — Version 1 — November 12, 2007

Page 6 
						

							


 
    



 



R8000/3 NA
R8000/3 NAR8000/3 NA R8000/3 NA






R8000/3 INTL
R8000/3 INTLR8000/3 INTL R8000/3 INTL






R12000/3 NA
R12000/3 NAR12000/3 NA R12000/3 NA






R12000/3 INTL
R12000/3 INTLR12000/3 INTL R12000/3 INTL






Electrical Output
Electrical OutputElectrical Output Electrical Output



Power Output
Power OutputPower Output Power Output






8kVA/8KW @



208v 3F Delta



8kVA/8KW @



400v 3F Wye



12kVA/12KW @



208v 3F Delta



12kVA/12KW @



400v 3F Wye



 
    



Nominal output frequency
Nominal output frequencyNominal output frequency Nominal output frequency






50-60 Hz auto-detection (Normal mode)



50 or 60 Hz (Battery mode)



Output Frequency
Output FrequencyOutput Frequency Output Frequency



Variation
VariationVariation Variation






Synchronized (Normal mode)



±0.1 when not synchronized with source (Battery mode)



Output overload
Output overloadOutput overload Output overload






100–110%: load transfers to Bypass mode after 10 minutes



110–125%: load transfers to Bypass mode after 1 minute



125–150%: load transfers to Bypass mode after 5 seconds



>150%: load transfers to Bypass mode after 300 ms



Voltage wave form
Voltage wave formVoltage wave form Voltage wave form






Sine wave; 2% THD with typical PFC load



Surge suppression
Surge suppressionSurge suppression Surge suppression






High-energy 6500 A peak



 
    



Noise filtering
Noise filteringNoise filtering Noise filtering






MOVs and line filter



 
    



Output Connections
Output ConnectionsOutput Connections Output Connections






One NEMA L15-



30R



One IEC309



516C6 (16A)



Two NEMA L15-



30R



Two IEC309



516C6 (16A)



 
    



 



 



 



 



 



Electrical Input
Electrical InputElectrical Input Electrical Input



Voltage Range
Voltage RangeVoltage Range Voltage Range



200-240 v 3F



Wye



380-415v 3F Wye



208v 3F Wye



380-415v 3F Wye



Nominal voltage
Nominal voltageNominal voltage Nominal voltage






208v 3F Wye



400v 3F Wye



208v 3F Wye



400v 3F Wye



Nominal frequency
Nominal frequencyNominal frequency Nominal frequency



50/60 Hz



50/60 Hz



50/60 Hz



50/60 Hz



Frequency range
Frequency rangeFrequency range Frequency range



45-65 Hz



45-65 Hz



45-65 Hz



45-65 Hz



Rated input current
Rated input currentRated input current Rated input current






 



18 amps



 



34.4 amps



 
    



Maximum input current at
Maximum input current atMaximum input current at Maximum input current at



nominal voltage
nominal voltagenominal voltage nominal voltage






 



22.4 amps



 



43A



 
    



Efficiency
EfficiencyEfficiency Efficiency






97% @ 40-100%



load



97% @ 40-100%



load



97% @ 40-100%



load



97% @ 40-100%



load



 
    



Input connector
Input connectorInput connector Input connector






NEMA L15-30



IEC309 516P6



(16A)



IEC309 560P9



IEC309 563P6



(63A)



 
    



 



 



 



 



 



Operating Temperature
Operating TemperatureOperating Temperature Operating Temperature



 



Operating Temperature
Operating TemperatureOperating Temperature Operating Temperature






50°F to 104°F (10°C to 40°C)



 
    



Optimal battery
Optimal batteryOptimal battery Optimal battery



performance
performanceperformance performance






41°F to 77°F (5°C to 25°C)



Non-operating
Non-operatingNon-operating Non-operating



Temperature
TemperatureTemperature Temperature



-13°F to 131°F (-25°C to 55°C)



Relative Humidity
Relative HumidityRelative Humidity Relative Humidity



Operating
OperatingOperating Operating






5% to 95% non-condensing



Operating Altitude
Operating AltitudeOperating Altitude Operating Altitude



Up to 3300 ft (1,000 meters) above sea level;



up to 6600 ft (2,000 meters) with 1% derating per +330 ft (100 meters)



Transit Altitude
Transit AltitudeTransit Altitude Transit Altitude



Up to 49,212 ft (15,000 meters) above sea level



Heat Dissipation
Heat DissipationHeat Dissipation Heat Dissipation



1266 BTU/hr maximum at 100% rated load (High Efficiency mode)



Audible Noise
Audible NoiseAudible Noise Audible Noise



Less than 50 dBA at 1 meter (Normal mode)



Less than 55 dBA at 1 meter (Battery mode)



Leakage Current
Leakage CurrentLeakage Current Leakage Current



< 3.5 mA



Surge suppression
Surge suppressionSurge suppression Surge suppression



ANSI C62.41 Category B3



QuickSpecs



HP Rackmountable 3 Phase Uninterruptible Power
HP Rackmountable 3 Phase Uninterruptible PowerHP Rackmountable 3 Phase Uninterruptible Power HP Rackmountable 3 Phase Uninterruptible Power



Systems
SystemsSystems Systems



Technical Specifications



DA - 12857   Worldwide — Version 1 — November 12, 2007

Page 7 
						

							


Safety Conformance
Safety ConformanceSafety Conformance Safety Conformance



 



UL 1778 4th



edition; CSA



C22.2, No. 107.3



EN and IEC



62040-1-1



UL 1778 4th



edition; CSA



C22.2, No. 107.3



EN and IEC



62040-1-1



EMC
EMCEMC EMC



 (Class A)



 



FCC Part 15



EN 62040-2



FCC Part



EN 62040-2



Unit Dimensions
Unit DimensionsUnit Dimensions Unit Dimensions



 (WxDxH)



14.4 x 26 x 10.3 in (441 x 660 x 261 mm) 6U



Shipping Dimensions
Shipping DimensionsShipping Dimensions Shipping Dimensions






(WxDxH)



25 x 38 x 46 in (635 x 965 x 1169 mm)



Unit Weight
Unit WeightUnit Weight Unit Weight






Without batteries
Without batteriesWithout batteries Without batteries



135 lb (61 kg)



 



With batteries installed
With batteries installedWith batteries installed With batteries installed



307 lb (140 kg)



Shipping Weight
Shipping WeightShipping Weight Shipping Weight






400 lbs (182 kg)



Extended Runtime Module
Extended Runtime ModuleExtended Runtime Module Extended Runtime Module






(ERM)



Unit Dimensions 
Unit Dimensions Unit Dimensions  Unit Dimensions 



(WxDxH)



 



17.2 x 26 x 5.2 in (438 x 660 x 131 mm) 3U



Shipping Dimensions
Shipping DimensionsShipping Dimensions Shipping Dimensions



(WxDxH)



 



47.25 x 31.5 x 37 in (1207 x 800 x 940 mm)



Unit Weight
Unit WeightUnit Weight Unit Weight



170 lbs (77 kg)



Shipping Weight
Shipping WeightShipping Weight Shipping Weight



185 lb (84 kg)



Estimated Backup Times Chart (Minutes) R8000/3
Estimated Backup Times Chart (Minutes) R8000/3Estimated Backup Times Chart (Minutes) R8000/3 Estimated Backup Times Chart (Minutes) R8000/3



Load %
Load %Load % Load %



With Internal Battery
With Internal BatteryWith Internal Battery With Internal Battery



With 1 ERM
With 1 ERMWith 1 ERM With 1 ERM



With 2 ERMs
With 2 ERMsWith 2 ERMs With 2 ERMs






With 3 ERMs
With 3 ERMsWith 3 ERMs With 3 ERMs






With 4 ERMs
With 4 ERMsWith 4 ERMs With 4 ERMs






20%



55



118



183



253



329



50%



23



46



69



94



120



80%



12



27



41



55



70



100%



9



21



32



43



54



Estimated Backup Times Chart (Minutes) R12000/3
Estimated Backup Times Chart (Minutes) R12000/3Estimated Backup Times Chart (Minutes) R12000/3 Estimated Backup Times Chart (Minutes) R12000/3



20%



37



78



119



163



211



50%



13



30



44



59



76



80%



6



17



26



34



44



100%



5



12



20



27



34



NOTE: 
NOTE: NOTE:  NOTE: 



Backup times are estimated for typical applications. Actual performance will depend on load and battery conditions.



 
    



Environment-friendly
Environment-friendlyEnvironment-friendly Environment-friendly



Products and Approach
Products and ApproachProducts and Approach Products and Approach



End-of-life Management
End-of-life ManagementEnd-of-life Management End-of-life Management



and Recycling
and Recyclingand Recycling and Recycling



Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling



programs in many geographic areas. For trade-in information, please go to



http://www.hp.com/go/green



. To recycle your product, please go to:



http://www.hp.com/go/green



 or contact your nearest HP sales office.



Products returned to HP will be recycled, recovered or disposed of in a



responsible manner.



The EU WEEE directive (2002/95/EC) requires manufacturers to provide



treatment information for each product type for use by treatment facilities.



This information (product disassembly instructions) is posted on the Hewlett



Packard web site at: 



http://www.hp.com/go/green



. These instructions may be



used by recyclers and other WEEE treatment facilities as well as HP OEM



customers who integrate and re-sell HP equipment.



QuickSpecs



HP Rackmountable 3 Phase Uninterruptible Power
HP Rackmountable 3 Phase Uninterruptible PowerHP Rackmountable 3 Phase Uninterruptible Power HP Rackmountable 3 Phase Uninterruptible Power



Systems
SystemsSystems Systems



Technical Specifications



DA - 12857   Worldwide — Version 1 — November 12, 2007

Page 8 
						

							


© Copyright 2007 Hewlett-Packard Development Company, L.P.



The information contained herein is subject to change without notice.



The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and



services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial



errors or omissions contained herein.



QuickSpecs



HP Rackmountable 3 Phase Uninterruptible Power
HP Rackmountable 3 Phase Uninterruptible PowerHP Rackmountable 3 Phase Uninterruptible Power HP Rackmountable 3 Phase Uninterruptible Power



Systems
SystemsSystems Systems



Technical Specifications



DA - 12857   Worldwide — Version 1 — November 12, 2007

Page 9