Digital Projection Titan 1080p 3d-l, Titan 1080p 3d-p, Titan 1080p 3d-l Uc, Titan 1080p Dual 3d, Titan 1080p Dual 3d Ultra Contrast Specifications

							TITAN 3D Pro Series II
Overview
PERFORMANCE SPECIFICATIONS
Digital Projection International (DPI), Texas Instruments’ first DL\
P™ partner and the 
original innovator of the 3-chip DLP™ projector, proudly introduces the TITAN 1080p-3D 
family.
Weighing in at just 31kgs/68 lbs. every TITAN 3D display employs the lat\
est in 1080p 
dark chip, 3-chip DLP™ technology to deliver up to 10,000 ANSI lumens\
 and up to 5000:1 
contrast. This award-winning compact chassis now includes six 1080p acti\
ve 3D models. 
All robustly built and extremely quiet, TITAN 3D projectors are the perf\
ect imaging solu-
tion for vital immersive applications including: military simulation, sc\
ientific visualization, 
medical and geological research, product engineering, commercial cinema \
and theme 
park attractions. 
In addition to the active 3D capability, TITAN 3D models also include DP\
’s new 
FastFrame™ technology, a revolutionary combination of hardware and firmware that 
reduces the artifacts and image blur typically associated with rapidly m\
oving displayed 
content. The benefits of FastFrame™ are especially important for simulation environments 
such as commercial and military flight training, and other applications \
where maintaining 
the visual integrity of high-speed imagery is vital.
For challenging 3D venues that require extreme mechanical rigging or pre\
cise mechani-
cal alignment, the TITAN 3D products can be ordered with DP’s RapidRi\
g™ flying and 
stacking frame. The RapidRig™ frames provide integrated pitch, roll a\
nd yaw adjustments, 
simplifying installation and alignment accuracy. TITAN 3D models utilize\
 the same lenses 
employed across the rest of DPI’s TITAN and LIGHTNING product range, \
so optical 
accuracy is always ensured. 
Other key benefits of the TITAN 1080p-3D models include: 
• High Bandwidth input >120Hz active stereoscopic DVI with no need for frame 
 doubling. This capability extends the dynamic range up to 16 bit for imp\
roved 
  contrast and color gamut. Both single-pipe and dual-pipe 3D sources are supported.
• Dual Flash Processing™ (DFP) – Enables distribution of 3D content via 60 Hz formats   
  by providing the option to frame-double the signal within the projector.\
 When this  
  option is selected, the input signal, having been processed and re-sized\
 to map to
  the native resolution of the projector, will also be frame-doubled to 120 Hz, and the   
  doubled frames interleaved. This produces imagery with the low flicker c\
haracteristics  
  of a native 120 Hz source, but without the infrastructure costs associated with 
  distributing and switching ultra-high bandwidth signals. 
• Projector electronics which provide an interface to drive an infrared transmitter to 
  synchronize switching glasses with active displayed frames. The user can\
 elect either  
  to pass through an external sync pulse, or to use the reference generate\
d internally  
  by the projector. Adjustments are provided to accommodate the phase and \
dead
  time characteristics of different switching glasses.
• FastFrame™ technology, a revolutionary combination of hardware and firmware that   
  provides user adjustments to vastly reduce the artifacts and image blur \
typically 
  associated with rapidly moving display content.  
• Minimal video delay from input to screen - as low as 1 frame.
• Eight user-selectable inputs, including HDCP-compliant DVI plus SD/HD-SDI.
• High bandwidth DVI inputs offer Single, Twin, Dual & Dual Twin DVI connectivity.
• Up to 16 Bit color for breathtaking image reproduction.
• DPI’s ColorMax™ calibration capabilities including enhanced seven-point color 
  correction for broader color space and precise color alignment.
• DPI’s CoolTek™ engineering, delivers the highest lumen performance with the lowest   
  power consumption, thermal (BTU) and noise level (dBA) output.
•  MultiBlend™  –  an  advanced  soft-edge  capability  for  seamlessly  meshing  arrays  of   
  projectors to create displays with ultra-high resolution or unusual aspe\
ct ratios.
•  Intelligent  Lens  Mount  (ILM)  -  provides  the  ability  for  the  user  to  program  up  to  10 
distinct  presets  for  lens  zoom,  focus  and  shift.  The  ILM  presets  can  be  assigned  and 
automatically recalled, by source and input.
TITAN 1080p 3D Pro Series II displays - powerful tools for immersive lar\
ge screen applica-
tions - bringing the precision of Digital Projection to your venue.
TITAN 1080p 3D-L • TITAN 1080p 3D-P • TITAN 1080p 3D-L  UC • TITAN 1080p 3D-P  UC • TITAN 1080p Dual 3D •  TITAN 1080p Dual 3D Ultra Contrast
Specifications subject to change without notice   DP V2.0 04/2011   ©2011 Digital Projection, Inc.
™DLP, Digital Light Processing and DMD are trademarks of Texas Instru\
ments, Inc.
Brightness (±10%)
1080p 3D-L & P:  6,000 ANSI Lumens 
1080p 3D-L & P  Ultra Contrast:  3,000 ANSI Lumens 
1080p Dual 3D:  10,000 ANSI Lumens 
1080p Dual 3D Ultra Contrast: 5,000 ANSI Lumens
Mechanical Orientation
•   “P” models support portrait and 360 ˚ of roll  
•  “L” models support 360 ˚ of pitch (lens up/down) 
Contrast Ratio  (±10%)
Standard Models - 2000:1  
Ultra Contrast Models -  5000:1
Display Type
3 x .95” Dark Chip 1080p DMD™ with   
Fast Transit Pixels for smooth  
greyscale and improved contrast
DMD Specification
1920 x 1080 pixels native, 12˚ tilt angle
Fill Factor
87%
Sealed Optics at DMD™ Interface
Protects DMD’s™ from optical contamination
Source Compatibility
•   Composite, s-video, and color difference     
  video standards 
•  RGB graphics standards up to 1920 x 1080 
•   DVI standards with HDCP compliance
•  High definition RGB and color difference     
 standards
•  High definition / standard definition serial      
  digital formats (SD/HD-SDI)
•  High bandwidth - Dual DVI, and Dual-Twin DVI
Video Processing
•  Enhanced 7 point color correction
•  Dual Flash Processing™ increases 60 Hz inputs to 
  120 Hz displayed output
• FastFrame™ Motion Blur Reduction
•   Xenon Color Mode - User selectable notch filter and   
  xenon-color mode processing, enable the projector  
  to replicate xenon lamp spectral performance
•    Class leading Video de-interlacing/processing of SD   
  and HD sources using auto 3:2 and 2:2 extraction, 
  ruggedized for editing discontinuities
•   Pixel-based motion adaptive interpolation
•   User selectable preset, parametric 
  de-gamma and user downloadable de-gamma
•   Frame Delay: as low as 1 frame, source dependant
•   Auto mode selection - plug and play setup High Bandwidth Input
• 3D capable
 
• Pixel Mapped - with low latency
• FastFrame™ Motion Blur Reduction  
• 120 Hz with no frame doubling 
3D Sync
Sync In - External lock
Sync Out - Shutter glass control  
 
Network Connection
LAN via RJ 45, Wireless 802.11b,
full protocol feature set
Lamp Type
Single or Dual High Intensity Discharge module   
Lamp Life
 (typical)1  2000 hours per lamp, dual lamp models 
provide 4000 hours sequential lamp operation, 
lamp low provides extended lamp life
Lens Mount
Zoom Lenses: Motorized horizontal and vertical
lens shift, zoom and focus 
Fixed Lenses: Manual focus
Lens Shift (maximum)
Fixed 1.12 and Zoom Lenses:
    • Vert: +0.7, -0.5 frame; Hor: ±0.1875 frame
0.67 Fixed lens: 
    • Vert: ±0.1 frame; Hor: ±0.1 frame
Lens Options
0.67 :1  fixed 1.87-2.56  :1 zoom
1.12  :1  fixed  2.56-4.16 :1 zoom
1.16- 1.49  :1 zoom  4.16-6.96 :1 zoom
1.39-1.87  :1 zoom  6.16-10.49 :1 zoom
• 1.12:1 Lenses include manual aperture
•    High-contrast lenses available for 0.67:1 
   and all zoom lenses
Mechanical Mounting
•    Front or rear table;  Front or rear ceiling 
   (ceiling mount optional)
•    Rugged, staging tolerant chassis with
   integrated handles
•    Optional RapidRig™ frame with         
integrated
   pitch, roll and yaw adjustments
Weight (chassis only)
68 lbs (31kg)
INPUT CAPABILITIESType
Composite
S-Video
Component
Interlaced/Std def Y, Cr/Pr, Cb/Pb, S
Graphics
Progressive RGB/Progressive Interlaced Hi def 
Y, Cr/Pr, Cb/PB 
RGBHV (Progressive)
Digital RGB   
Serial Digital 
SD/HD-SDI (SMPTE 259M/292M) 
DVI - High bandwidth
Dual - main
Dual - sub
*The main & sub dual DVI inputs can be used in   
parallel to support dual-pipe 3D connectivity 
Connector
BNC
4-pin mini DIN
BNCx4
BNCx5
D sub (15-pin)
DVI
BNC
DVI
DVI Quantity
1
1
1
1
1
1
1
1
1
 1080p 3D-L1080p 3D-L
Ultra Contrast 1080p 3D-P1080p 3D-P
Ultra Contrast 
						

							Projector Dimensions
TITAN 1080p-3D side panel
1 Based on 4-6 hour/day operational profile. Venue and application conditi\
ons may impact actual lamp life.
  See Digital Projection’s Product Warranty Statement for details on la\
mp warranty.
  Installations requiring horizontal or vertical tilt orientations greater\
 than 15 degrees may reduce the    
  actual operational hours of one of the two lamps.
TITAN 1080p 3D Pro Series II
shown with optional rigging frame
DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD, SUITE 115  KENNESAW, GA. 30144 • T: 770.420.1350 • F: 770.420.1360 • www.digitalprojection.com
DIGITAL PROJECTION, LTD. • GREENSIDE WAY, MIDDLETON  MANCHESTER, UK. M24 1XX • T: +44.161.947.3300 • F: +44.161.684.7674 • www.digitalprojection.co.uk
DIGITAL PROJECTION, CHINA • TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG  DISTRICT  BEIJING, PR CHINA 100101 • T: +86.10.58239771• F: +86 10 58239770
DIGITAL PROJECTION,  ASIA • 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 • T: +65.6284.1138 • F: +65.6284.1238
Projector dimensions (in)
L1 25.4   W1 21.4   H1 10
Lenses  HB Part # HB Part #0.67:1  105-607 107-195
1.12:1  105-608 105-608
1.12:1 (short)  105-609 105-609
1.16-1.49:1  109-236 109-359
1.39 - 1.87:1  105-610 107-196
1.87 - 2.56:1  105-611 107-197
2.56 - 4.16:1  105-612 107-198
4.16 - 6.96:1  105-613 107-199
6.92-10.36:1  109-235 109-358
PARAMETERS
Accessories          Part #Single TITAN 3D Lamp & Housing* (2 required)    109-319
RapidRigTM Frame     107-956
TITAN 1080p 3D Series Adjustable Ceiling Mount    108-499
Infrared Remote (Replacement)        105-023
* Includes high-performance replacement air filter(s)
Native Color Temperature
HDTV Formats Supported Scan Rates Supported Remote Control
Automation Control
Operating/Storage Temperature Operating Humidity
Thermal Dissipation  Fan Noise
Power Requirements Power Consumption
ADVANCED TECHNICAL SPECIFICATIONS
Projectors  Part #TITAN 1080p 3D-L  110-403
TITAN 1080p 3D-P  109-583
TITAN 1080p 3D-L UC    110-657
TITAN 1080p 3D-P UC    109-322
TITAN 1080p Dual 3D  109-323
TITAN 1080p Dual 3D Ultra Contrast   109-324
6500°K ±1000°K; white balance-adjustment: 3000°K to 10000°K
User selectable Xenon-like colorimetry using dynamic optical and electronic enhancement.
  1080i (50Hz, 60Hz), 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080 24sf, 720p (50, 60Hz), 480i, 480p
Inputs 1-7: Horizontal: 15kHz to 100kHz / Vertical: 24Hz to 85Hz   -   Input 8: 3D progressive 576p up to 1080p @ 120Hz
 
Addressable IR remote control, wireless and wired with loop-through / On board invertable keypad
 
 LAN connection via RJ45  / RS232 9-pin D type 
Operating: 0 to 40°C / Storage: -10 to 50°C
20 to 80% non-condensing
  1,981 BTU/hr                                                                      3,108 BTU/hr
Less than 42dBA                                                                Less than 45dBA 100-240 VAC ±10%, 50/60Hz single phase 
  580 watts maximum        910 watts maximum
(Single Lamp 
Models)
498.519.6543.5
21.4
216.9
8.5
146.95.8
619.524.4
581.4 22.9
45.0
1.8645.4
25.4
253.5 10.0
220.1 8.7
33.4 1.3
 1080p 3D-L1080p 3D-L
Ultra Contrast(Dual Lamp 
Models)
TMCORE TECHNOLOGY
 1080p 3D-P1080p 3D-P
Ultra Contrast
Projector dimensions (mm)
L1 645.4   W1 543.5   H1 253.5