Digital Projection Titan 1080p 3d, Dual 3d, Titan 1080p 3d, Dual 3d Ultra Contrast, Titan Dual Fastframe User Manual

Rev B September 2010 Page 4.49
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section	4, 	Overview.

Notes
 
Setup Menu 
  Comunication
 When fresh batteries are 
inserted in the remote control, 
it will default to address 00. 
Remote control 00 is a master 
control,  able to control all 
projectors.
  If two or more projectors are set 
to the same...

Page 4.50  Rev B September 2010
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

Notes
 
Setup Menu 
  Network
 Some items may be greyed out 
or not editable, due to the effect 
of other settings made in the 
Network submenu.
  For example, if a 
Wired 
Connection is selected:
  Wifi, Channel and SSID will be 
unavailable.
Setup menu...

Rev B September 2010 Page 4.51
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section	4, 	Overview.

Notes
 IP Address cannot be changed 
if DHCP is set to ON.
  DHCP will set the the address, 
which will be displayed for 
information only.
Setup menu, Network continued
DHCp
Press  and   to select DHCP
  Press 
 to open the DHCP control box.
  Press 
 and...

Page 4.52  Rev B September 2010
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

Notes
 IP Subnet cannot be changed if 
DHCP is set to ON.
  DHCP will set the the subnet 
mask, which will be displayed 
for information only.
Subnet Mask
Press  and   to select Subnet
  Press 
 to open the Subnet control box.
  Press 
 and   to select...

Rev B September 2010 Page 4.53
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section	4, 	Overview.

Gateway Mask
Press  and   to select Gateway
Press  to open the IP Address control box.
Use  and   to select each number in turn.
Use  and   to adjust the number
then move to the next number.
Use  and   to select from
Apply
 Press  
 to apply the new IP...

Page 4.54  Rev B September 2010
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

Notes
  3D may not be present on some 
models
 
Setup Menu 
  3D
 If FastFrame is turned on, then 
setting 3D Mode to Consumer 
or Professional will turn it off.
  When 
3D Enable is on, it is not 
possible to turn on FastFrame.
 It is important that 3D...

Rev B September 2010 Page 4.55
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section	4, 	Overview.

3D Format
Press  and   to select 3D Format.
  Press 
 and   to select from:
Sequential
Dual Pipe
Frame Packing
Top-And-Bottom
Side-By-Side (Half)
•
Notes
  None of the 3D options are 
avialable unless 3D Mode is set 
to Consumer or Professional.
Setup...

Page 4.56  Rev B September 2010
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

Dark t ime
Ghosting can be caused by the left and right images overlapping during the time 
that the Z screen or 3D glasses are switching.
Press  and   to select Dark Time.
  Press 
 and   to adjust the slider (0 to 6000 µS).
Frame Dominance
The outgoing...

Rev B September 2010 Page 4.57
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 4. Controlling the projector

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section	4, 	Overview.

Notes
  None of the 3D options are 
avialable unless 3D Mode is set 
to Consumer or Professional.
 In order to achieve maximum 
light output and a smooth 
greyscale, whilst eliminating 
ghosting, the following 
procedure is recommended:
Set the Dark Time...

Page 4.58  Rev B September 2010
4. Controlling the projector Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual

 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section	4, 	Overview.

Output Shuttering (Frame rate Multiplication)
If the 3D video is available only at low frame rates, it will be necessary to multiply 
the frame rate to obtain a flicker-free image. For example, a 60Hz frame rate can be 
doubled to 120Hz, or a 48Hz frame...