Home > Digital Projection > Projector > Digital Projection Titan 1080p-330-3d L Or P, Titan 1080p-330-3d L Or P Ultra Contrast, Titan 1080p-660-3d, Titan 1080p-660-3d Ultra Contrast Specifications

Digital Projection Titan 1080p-330-3d L Or P, Titan 1080p-330-3d L Or P Ultra Contrast, Titan 1080p-660-3d, Titan 1080p-660-3d Ultra Contrast Specifications

Add to Favourites

Download as PDF Print this page Share this page

Have a look at the manual Digital Projection Titan 1080p-330-3d L Or P, Titan 1080p-330-3d L Or P Ultra Contrast, Titan 1080p-660-3d, Titan 1080p-660-3d Ultra Contrast Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

View all the pages

Add page 1 to Favourites

image text

Enable zoom

							 Overview
PERFORMANCE SPECIFICATIONS
Brightness (±10%)1080p-330-3D L or P: 6,000 ANSI Lumens 1080p-330-3D L or P-UC: 3,000 ANSI Lumens 1080p-660-3D: 10,000 ANSI Lumens1080p-660-3D-UC: 5,000 ANSI Lumens
Contrast Ratio (±10%)1080p-330-3D L or P: 2,000:1 1080p-330-3D L or P-UC: 5,000:1 1080p-660-3D: 2,000:11080p-660-3D UC: 5,000:1
Display Type1080p: .95” Darkchip DMD
DMD Specification1080p: 1920 x 1080 pixels native, +/-12 deg tilt angleFast transit Pixels for smooth greyscale and improved contrast.
Fill Factor86%
Sealed Optics at DMD™ InterfaceProtects DMD’s™ from optical contamination
Source CompatibilityAdvanced Front End Processor:•	 3GSDI	including	1080p	60fps,	24p	(4:4:4	 and	4:2:2)	 and	1080i.•	 HDMI	 including	 Deep	Color	processing.•	 Graphics	 standards	up	to	1920 	x 	1200 	resolution 	at 	60fps	 via	DVI 			 or	 VGA.•	 Component	 video	(SD	and	 HD)	 via	YPr	 Pb,	RGB,	 or	RGBS.•	 S-Video	 (PAL,	NTSC	 &	SECAM)•	 Composite	 Video	(PAL,	NTSC	 &	SECAM).
High	 bandwidth,	 pixel	mapped	 path:•	 Dual	DVI	accepts	 graphics	 standards	 up	to	1920	 x1200@120fps.•	 HDMI	 1.4	including	 3D	Standards•	 Dual	 Pipe	(2	x	DVI	 or	HDMI)
High	 Bandwidth	 Input•	3D	 capable •	Pixel	 Mapped	 -	with	 low	latency•	FastFrame™	 Motion	Blur	Reduction •	120	 Hz	with	 no	frame	 doubling 	
3D SyncSync In - External lockSync Out - Shutter glass control  Network	 ConnectionIR	handset	 with	wired	 option	 via	3.5mm	 jack	(with	 loop	through).LAN	Via	RJ45	 with	full	feature	 set	via	protocol.Duplication	 of	OSD	 served	 from	projector	 controller	 via	RJ45.RS232	 Via	9	Pin	 connector.
Lamp TypeTwo	 x	330W	 High	Intensity	 Discharge
Lamp Life (typical)1Full	Power:	 1500	hrs	(up	 to	3000	 hrs	in	lamp	 sequential	 mode)	
Note:	TITAN	 660	products	 employing	 330	watt	 lamps	 may	be	used	 in	any 	pitched	 or	portrait	 orientation.	 When	used	in	such	 non-standard	 orientations,	lamp life may be reduced by up to 50%  Intelligent Lens MountMotorised	and	programmable	 Focus,	Zoom,	and	Vertical	and	Horizontal	 offsets	with	ten	positional	 memory	banks.
WUXGA	models:0.67:1	lens	–	Vert:	 +/-	0.1	frame;	 Hor:	+/-0.1	 frame1.16-1.49:1	 lens	-	Vert:	 +/-	0.5	frame;	 Hor:	+/-0.18	 frame1.12:1	and	other	 zoom	 lenses	 -	Vert:	 +0.7,	 -0.5	frame;	 Hor:	 +/-0.18	 frame
Lens Options0.67  :1 fixed 1.12 :1 fixed 1.16	-	1.49	 :1	 zoom	1.39	-	1.87	 :1	 zoom	1.87	-	2.56:1	 :1	 zoom2.56	-	4.16:1	 :1	 zoom4.16	-	6.96:1	 :1	 zoom6.92 - 10.36:1  :1 zoom•	1.2:1 	Lenses	 include	 manual	 aperture•		High-contrast	 lenses	available	 for	0.73:1				and	 all	zoom	 lenses
Specifications subject to change without notice   DP V1.0 06/21/2012   ©2012 Digital Projection, Inc.™DLP, Digital Light Processing and DMD are trademarks of Texas Instru\
ments, Inc.
Mechanical Mounting•		Front	 or	rear	 table;		 Front	or	rear	 ceiling	   (ceiling mount optional)•		Rugged,	 staging	tolerant	 chassis	with   integrated handles•	Optional	 RapidRig™	 frame	with	integrated			pitch,	 roll	and	 yaw	 adjustments
Weight	 (chassis	 only)36	kg,	 79.4	 lbs
Video	 Processing:	 Advanced	Front	End	processor:•	 Advanced	 geometry	correction:		 o	Accurate	 warp	map	generation	 by	adjustment	 of	an interpolated grid array of up to 16 x 16 nodes.  Up to	eight	 maps	 can	be	generated,	 downloaded	 and	stored	on	the	 projector	 for	selection	 via	the	 OSD	 or	control application.	 o	On	board	 implementation	 of	Pincushion	 &	Barrel,	Cornerstone,	 Vertical	&	Horizontal	 Keystone,	and	Image Rotation.•	 High	Quality	Edge	Blending	 &	Multi	 Projector	 Tiling	 o	High	 bit	depth	 processing	 in	blend	 region	 to	ensure smooth image.	 o	Adjustable	 S-Curve	Parameter	 and	degamma	functions. o Black Level Uplift to ensure uniformity across blend in dark images. o Correction of black level uplift to compensate for non-active pixels at the edge of the DMD.	 o	 The	user	 can	choose	 to	assign	 the	projector	 a	position	within	an	image	 matrix.		 The	video	 processing	can automatically extract the appropriate segment of the input image and enable blending for the appropri-ate edges.•	 Single	 Stage	Scaling	 o	Resizing	 and	Warp	 functions	 are	carried	 out	in	a	single	 stage	process	 maximizing	 the	clarity	 of	the	resulting	 image.	When	operating	 Blend	in	conjunction	with	 Warp	 the	processing	 will	automatically	 superim-pose	the	warped-blend	 map,	onto	the	geometrically	corrected image.	 o	 The	user	 can	switch	 between	 different	sources	and input aspect ratios, yet retain the accuracy of the geometrically corrected output.•	 PIP/POP/PAP		 o	User’s	 choice	 between	 inputs	for	the	 main	 and	sub images (Picture in Picture or PIP).  The processing additionally	 offers	the	option	 to	display	 two	sources,	side-by	 side,	scaled	 to	the	 vertical	 size	of	the	 panel	Picture and Picture or PAP), or alternatively maintain-ing their original aspect ratios (Picture Opposite Picture or POP).•	 ColorMax	 o	 Each	 projector	 is	accurately	 calibrated	at	the	factory	 with	its	native	 primary	 colors	and	white	 point	being stored in the on-board memory. User’s choice to	employ	 the	external	 control	application	 to	download	his	 own	 measured	 color	space,	 as	specific	 to	the	 oper-ating environment, and also his preferred Target color space for primary and secondary colors.  Not only is this the most flexible color management technology available, but it also enables accurate matching of pro-jectors	 in	tiled	 or	blended	 applications.		•	 Dual	Flash	Processing	 can	be	used	 to	multiply	 the	displayed frame rate for 3D sources. •	 FastFrame	 motion	blur	reduction.•	 Dual	 Pipe	processing	 allows	the	delivery	 of	two	sources in parallel, typically one for the Left Eye and the other for the Right.  •	 De-interlacing,	 Video	enhancement	 and	Frame	DelayThe	projector	 automatically	 detects	interlaced	 video	and implements 3:2 or 2:2 extraction as appropriate, with	pixel	 based,	 motion	 adaptive	 interpolation	 and	auto cadence correction.
Digital	Projection	 International	 presents	a	revolution	 in	advanced 	
3-chip	DLP	displays	 with	the	new	 TITAN	 Pro	Series	 3	product	 line.	
Incredibly compact and efficient for its lumen performance, the 
TITAN	 Pro	Series	 3	incorporates	 DPI’s	advanced	 image	Warp	and	
Blend, Intelligent Lens Mount, ColorMax calibration technology, 
optional active 3D connectivity, and a host of vital professional 
features to suit almost any commercial installation or staging appli-
cation imaginable.
 
As efficient as they are capable, the introduction of the 10,000 
lumen TITAN Pro Series 3 lineup marks another milestone in high 
brightness,	 in	a	chassis	 size	more	 akin	to	lower-lumen	 displays.	
The	new	 TITAN	 Pro	Series	 3	projectors	 are	available	 in	SX+,	 1080p 	
and	WUXGA	 native	resolution,	 and	include	 powerful	 DPI	innova-
tions such as FastFrame, Dual-Flash Processing and CoolTek 
Engineering.	 The	TITAN	 Pro	Series	 3	extends	 DPI’s	powerful	 TITAN	
product	 line,	the	most	 powerful	 and	efficient	 displays	 available.
Utilizing	DPI’s	new,	advanced	 electronics,	 all	TITAN	 Pro	Series	 3	
models	 provide	 the	user	 with	advanced	 Warp	and	Blend	 capabili-
ties,	including	 the	ability	 to	make	 extensive	 geometric	 warp	correc-
tion	for	screens	 with	complex	 geometry.	 Superbly	capable	edge	
blending	 and	multi-projector	 tiling	is	provided	 by	way	 of	high	 bit	
depth processing that ensures a seamless, contiguous image can 
be	 created	 from	multiple	 projectors.	 Additionally,	 end	users	 can	
choose	 to	utilize	 the	TITAN	 Pro	Series	 3’s	onboard	 tiling	function 	
by	assigning	 each	projector	 a	position	 within	an	image	 matrix.	 The	
video processing then automatically extracts the appropriate seg-
ment of the input image and enables blending for the appropriate 
edges.
Also included in the 3D-capable TITAN Pro Series 3 is DPI’s exclu-
sive 3D advances that further extend the remarkable flexibility engi-
neered	 within	each	TITAN	 Pro	Series	 3	display.	 Applications	 with	
120	 Hz	native	 sources	 utilize	the	High	 Bandwidth	 Input,	eliminating 	
the	need	 for	frame	 doubling.	 For	60	Hz	 3D	 applications,	 DPI’s	
built-in Dual Flash Processing enables distribution of 3D content 
via	60	Hz	 formats	 by	frame-doubling	 the	signal	 within	the	projector, 	
producing	 the	low	 flicker	 image	 characteristics	 of	a	native	 120	Hz	
source	 without	 the	infrastructure	 costs	associated	 with	distributing 	
and	switching	 ultra-high	 bandwidth	 signals.
As	is	the	 case	 with	all	Digital	 Projection	 displays,	our	careful	 engi-
neering	 guarantees	 TITAN	projectors	 provide	remarkable	 resolu-
tion,	color	 saturation	 and	light	 output	 for	years	 to	come.	 Equally 	
important, DPI’s legacy in providing superior customer and techni-
cal	services	 assures	our	experienced	 support	staff	is	always	 avail-
able to address your needs.
TITAN 1080p Pro Series 3D
 TITAN 1080p-330-3D L or P • TITAN 1080p-330-3D L or P Ultra Contrast • TITAN 1080p-660-3D • TITAN 1080p-660-3D Ultra Contrast
INPUT CAPABILITIESTypeCompositeS-VideoHDMI	(HDCP	 compliant)ComponentInterlaced/Std	 def	Y,	Cr/Pr,	 Cb/Pb,	 S
RGBHV	 (Progressive)Digital	RGB			Serial Digital SD/HD-SDI	 (SMPTE	259M/292M) DVI	-	High	 bandwidthDual - mainDual - sub*The	 main	 &	sub	 dual	 DVI	inputs	 can	be	used	 in	 parallel to support dual-pipe 3D connectivity 
ConnectorBNC4-pin	 mini	DINHDMI	 1.4
BNCx4
D sub (15-pin)DVI
BNC
DVIDVI
Quantity112
1
11
1
11
1080p-330-3D-L1080p-330-3D-P1080p-660-3D1080p-660-3 D
Ultra Contrast1080p-330-3D-L Ultra Contrast1080p-330-3D-P Ultra Contrast1080p-660
Ultra Contrast

Add page 2 to Favourites

image text

Enable zoom

							Native Color Temperature
HDTV Formats Supported
Scan Rates Supported
Remote Control
Automation Control
Operating/Storage Temperature
Operating Humidity
Thermal Dissipation 
Fan Noise
Power Requirements
Power Consumption
PARAMETERS
Projectors    Part #TITAN 1080p-330-3D L     112-574TITAN 1080p-330-3D L Ultra Contrast     112-575TITAN 1080p-330-3D P     112-576TITAN 1080p-330-3D P Ultra Contrast     112-577TITAN 1080p-660-3D     112-578TITAN 1080p-660-3D Ultra Contrast     112-579
Accessories     Part #TITAN 330 & 660 Lamp (2 required for 660)    109-319RapidRigTM Frame     111-265 TITAN Adjustable Ceiling Mount      108-499Infrared Remote (Replacement)      105-023Portrait Outriggers     109-687* Includes high-performance replacement air filter(s)1 Based on 4-6 hour/day operational profile.  Venue and application condit\
ions may impact actual lamp life. See Digital Projection’s Product Warranty Statement for details on la\
mp warranty. Installations requiring horizontal or vertical tilt orientations greater\
 than 15 degrees may reduce the actual operational hours of one of the two lamps.
ADVANCED TECHNICAL SPECIFICATIONSshown with optional rigging frame
DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD, SUITE 115  KENNESAW, GA. 30144 • T: 770.420.1350 • F: 770.420.1360 • www.digitalprojection.comDIGITAL PROJECTION, LTD. • GREENSIDE WAY, MIDDLETON  MANCHESTER, UK. M24 1XX • T: +44.161.947.3300 • F: +44.161.684.7674 • www.digitalprojection.co.ukDIGITAL PROJECTION, CHINA • TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG  DISTRICT  BEIJING, PR CHINA 100101 • T: +86.10.58239771• F: +86 10 58239770DIGITAL PROJECTION,  ASIA • 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 • T: +65.6284.1138 • F: +65.6284.1238
Projector Dimensions
Projector	 dimensions	 (in)L1	26.2			 W1	22.4			 H1	10
TMCORE TECHNOLOGY
Projector	 dimensions	 (mm)L1	664			 W1	568.5			 H1	253.3
Native	 Color	Temperature:	 User	Selectable	 from	3200K,	 to	10000K
Signal	 formats	 480i,	576i	480p,	 576p,	720p,	1080i	(50,	59.94	 and	60Hz)	 and	1080p	 (23.98,	 24,	25,	29.97	 and	30Hz).
The	3GSDI	 Input	supports	 SD-SDI,	HD-SDI	and	3G-SDI	 YCbCr	4:2:2	serial	 digital	 component	 video.		SMPTE	 292M,	SMPTE	259M-C	 and	SMPTE	 424M	compliant.		 Accepts	484i,	576i,	720p,	 1080i	and	1080p	 Single	 link	formats	 at	270Mb,	 1.485Gb	 or	2.97Gb	rates.	Stream 	A	 &	 Stream	 B-switchable.HDMI	&	DVI	 Inputs	 -	HDMI	 1.3	with	 or	without	 HDCP,	36	bit	video	 compatible.DVI-D	 input	with	or	without	 HDCP.
Addressable	 IP	remote	 control,	 wireless	 and	wired	 with	loop	 through.		 On	Board	 keypad.
LAN	connection	 via	RJ45/RS232	 9	pin	 D	Type.
Operating 0-35C.  Storage -10 to +50C
20 to 80% non-condensing
2900 BTU/hr
330- 	36dBA 																															660- 	45dBA
110-240VAC		50/60Hz	Single	Phase.
950	Watts	 MAX
1080p & WUXGA Lenses  HB Part #  HC Part #0.67:1 105-607 107-1951.12:1 105-608 105-6081.16 - 1.49:1 109-236  109-3591.39 - 1.87:1 105-610  107-1961.87 - 2.56:1 105-611  107-1972.56 - 4.16:1 105-612  107-1984.16 - 6.96:1 105-613  107-1996.92 - 10.36:1 109-235  109-358
TITAN 1080p Pro Series 3D
1080p-330-3D-L1080p-330-3D-P1080p-660-3D1080p-660-3D
Ultra Contrast1080p-330-3D-L Ultra Contrast1080p-330-3D-P Ultra Contrast
CHASIS - SIDE
CHASIS - FRONT
  8.675
220.4
 
 22.382
568.5  
 
20.610
523.5  
 
9.623
244.4
 
 5.739
145.8
 
 
9.971
253.3
 
 25.433
646.0  
 1.703
43.3  
 1.593
40.5  
  6.220
158.0
 
23.661
601.0 GRAB RAIL CENTRES  22.874
581.0  
 
26.152
664  
AKEYPAD ASSY
 21.353
542.4  
 6.374
161.9
 
  3.425
87.0  
AIR OUT
 24.449
621.0    
2.560
65.0  
 4.646
118.0
 
(4.449)113 (MIN)
 23.661
601.0  (10.356)263 (MAX)
MOTOR GEARBOX COVER
AIR IN
PLEASE NOTE: LENS EXTENSIONMEASURED FROM FRONT OF CORNERPOST. FOR FURTHER INFORMATION SEE USER MANUAL
4.338
110.2 (REF)
 1.870
47.5  
  1.870
47.5  
A  (1 : 2)
M6 x 1.0 GRAB RAIL SECURING HOLES
1.772
45.0
  2.393
60.8  
 523.5 CEILING MOUNT CENTRES (REMOVE FEET) 
 601.0 CEILING MOUNT CENTRES (REMOVE FEET) 
AIR IN
UPDATESERVICEPb/BPr/R
INWIREDREMOTEOUTCOMPONENT
SYNCY/GLAMP3 4
1 2VGADVI
1 3 7ERROR
HDMI2OutputSPDIFSERIALCOMP 15
LANCOMP 2S-VIDEO86
43GSDI
IR
INPUT CONNECTIONS DETAIL
DVIInput 9DUALPIPEInput 11
3DSYNCOUTIN
DVI/HDMIInput 10
INPUT CONNECTIONS DETAIL
HOLE CENTRES FOR GRAB RAIL FIXINGS
THE FOLLOWING PROJECTORS ALL APERTAIN TO THIS LAYOUTSX+112-568 PROJECTOR, TITAN SX+ 3D-L (PV6S) 112-569 PROJECTOR, TITAN SX+ 3D-L UC (PV6S) 112-570 PROJECTOR, TITAN SX+ 3D-P (PV6S) 112-571 PROJECTOR, TITAN SX+ 3D-P UC (PV6S) 112-572 PROJECTOR, TITAN SX+ DUAL 3D (PV6S) 112-573 PROJECTOR, TITAN SX+ DUAL 3D UC (PV6S)112-593 PROJECTOR, TITAN SX+ 660 2D (PV6S) 1080P112-574 PROJECTOR, TITAN 1080P 3D-L (PV6S) 112-575 PROJECTOR, TITAN 1080P 3D-L UC (PV6S) 112-576 PROJECTOR, TITAN 1080P 3D-P (PV6S) 112-577 PROJECTOR, TITAN 1080P 3D-P UC (PV6S) 112-578 PROJECTOR, TITAN 1080P DUAL 3D (PV6S) 112-579 PROJECTOR, TITAN 1080P DUAL 3D UC (PV6S) 112-594 PROJECTOR, TITAN 1080P 660 2D (PV6S)WUXGA112-580 PROJECTOR, TITAN WUXGA 3D-L (PV6S) 112-581 PROJECTOR, TITAN WUXGA 3D-L UC (PV6S) 112-582 PROJECTOR, TITAN WUXGA 3D-P (PV6S) 112-583 PROJECTOR, TITAN WUXGA 3D-P UC (PV6S) 112-584 PROJECTOR, TITAN WUXGA DUAL 3D (PV6S) 112-585 PROJECTOR, TITAN WUXGA DUAL 3D UC (PV6S)112-794 PROJECTOR, TITAN WUXGA 660 2D (PV6S) 
 
  CAD GENERATED DRAWINGDO NOT MAKE MANUAL CHANGES
IF IN DOUBT, ASK.
Distribution Code
FINISHCODEMATERIAL
REMARKSOFFNoREFER TODESCRIPTIONPRE REVSITEM
76
54321
SURFACES SHOULD BE EQUAL TO OR LESS THAN 0.8um (N6 CLA32)THE SURFACE TEXTURE ROUGHNESS NUMBER OF MACHINEDREMOVE ALL BURRS & SHARP EDGES. DO NOT SCALE DRAWINGDIMENSIONS IN MILLIMETRESUnless Otherwise StatedFIRST USED ON
DATEAPP.ENG.DRAWNSCALEORIGINAL
A1:SHEETDATEAPP.DO.DRAWNNOTEREV.
ANGLES ± 0° 30Decimal ± 0.005"Fractional ±1/64"IMPERIAL1     = ±0.41.0   = ±0.21.00  = ±0.11.000 = ±0.01METRIC:UNLESS OTHERWISE STATEDTOLERANCESLAST CHANGECOMPONENT OR DRG.No.TITLE
forwarded to you in confidence for a specific purpose.ItThis document contains proprietary information which isshall not be reproduced nor transfered to other documentsnor disclosed to others,nor used for manufacturing or anyother purpose without the prior written permission of DigitalProjection Ltd. It shall be returned immediately upon request.PROPRIETARY INFORMATION
DRAWN BS 3083rd Angle Projection
A1 DRG. No.
1212345
678910111314
A
B
C
D
E
F
G
H
J
MIDDLETON M24 1XXDIGITALPROJECTION1:1J.C21-02-12
PROJECTOR, TITAN 1080P 3D-L(PV6S)112-574
11
 
 01
19-03-12OFJ.C                       
                       PROJECTOR ASSEMBLY, TITAN (PV6S)-UPDATED 21-9-12-DRAFT COPY REMOVED-CEILING MOUNT CENTRES  ADDED
INPUT CONNECTIONS
 8.675
220.4
 
 22.382
568.5  
 
20.610
523.5  
 
9.623
244.4
 
 5.739
145.8
 
 
9.971
253.3
 
 25.433
646.0  
 1.703
43.3  
 1.593
40.5  
  6.220
158.0
 
23.661
601.0 GRAB RAIL CENTRES  22.874
581.0  
 
26.152
664  
AKEYPAD ASSY
 21.353
542.4  
 6.374
161.9
 
  3.425
87.0  AIR OUT
 24.449
621.0    
2.560
65.0  
 4.646
118.0
 
(4.449)113 (MIN) 23.661
601.0  (10.356)263 (MAX)
MOTOR GEARBOX COVER
AIR IN
PLEASE NOTE: LENS EXTENSIONMEASURED FROM FRONT OF CORNERPOST. FOR FURTHER INFORMATION SEE USER MANUAL
4.338
110.2 (REF)
 1.870
47.5  
  1.870
47.5  
A  (1 : 2)
M6 x 1.0 GRAB RAIL SECURING HOLES
1.772
45.0
  2.393
60.8  
 523.5 CEILING MOUNT CENTRES (REMOVE FEET) 
 601.0 CEILING MOUNT CENTRES (REMOVE FEET) 
AIR IN
UPDATESERVICEPb/BPr/R
INWIREDREMOTEOUTCOMPONENTSYNCY/GLAMP3 4
1 2VGADVI1 3 7ERRORHDMI2OutputSPDIFSERIALCOMP 15
LANCOMP 2S-VIDEO86
43GSDI
IR
INPUT CONNECTIONS DETAIL
DVIInput 9DUALPIPEInput 11
3DSYNCOUTINDVI/HDMIInput 10
INPUT CONNECTIONS DETAIL
HOLE CENTRES FOR GRAB RAIL FIXINGS
THE FOLLOWING PROJECTORS ALL APERTAIN TO THIS LAYOUTSX+112-568 PROJECTOR, TITAN SX+ 3D-L (PV6S) 112-569 PROJECTOR, TITAN SX+ 3D-L UC (PV6S) 112-570 PROJECTOR, TITAN SX+ 3D-P (PV6S) 112-571 PROJECTOR, TITAN SX+ 3D-P UC (PV6S) 112-572 PROJECTOR, TITAN SX+ DUAL 3D (PV6S) 112-573 PROJECTOR, TITAN SX+ DUAL 3D UC (PV6S)112-593 PROJECTOR, TITAN SX+ 660 2D (PV6S) 1080P112-574 PROJECTOR, TITAN 1080P 3D-L (PV6S) 112-575 PROJECTOR, TITAN 1080P 3D-L UC (PV6S) 112-576 PROJECTOR, TITAN 1080P 3D-P (PV6S) 112-577 PROJECTOR, TITAN 1080P 3D-P UC (PV6S) 112-578 PROJECTOR, TITAN 1080P DUAL 3D (PV6S) 112-579 PROJECTOR, TITAN 1080P DUAL 3D UC (PV6S) 112-594 PROJECTOR, TITAN 1080P 660 2D (PV6S)WUXGA112-580 PROJECTOR, TITAN WUXGA 3D-L (PV6S) 112-581 PROJECTOR, TITAN WUXGA 3D-L UC (PV6S) 112-582 PROJECTOR, TITAN WUXGA 3D-P (PV6S) 112-583 PROJECTOR, TITAN WUXGA 3D-P UC (PV6S) 112-584 PROJECTOR, TITAN WUXGA DUAL 3D (PV6S) 112-585 PROJECTOR, TITAN WUXGA DUAL 3D UC (PV6S)112-794 PROJECTOR, TITAN WUXGA 660 2D (PV6S) 
 
  CAD GENERATED DRAWINGDO NOT MAKE MANUAL CHANGES
IF IN DOUBT, ASK.
Distribution Code
FINISHCODEMATERIAL
REMARKSOFFNoREFER TODESCRIPTIONPRE REVSITEM
76
54321SURFACES SHOULD BE EQUAL TO OR LESS THAN 0.8um (N6 CLA32)THE SURFACE TEXTURE ROUGHNESS NUMBER OF MACHINEDREMOVE ALL BURRS & SHARP EDGES. DO NOT SCALE DRAWINGDIMENSIONS IN MILLIMETRESUnless Otherwise StatedFIRST USED ON
DATEAPP.ENG.DRAWNSCALEORIGINAL
A1:SHEETDATEAPP.DO.DRAWNNOTEREV.ANGLES ± 0° 30Decimal ± 0.005"Fractional ±1/64"IMPERIAL1     = ±0.41.0   = ±0.21.00  = ±0.11.000 = ±0.01METRIC:UNLESS OTHERWISE STATEDTOLERANCESLAST CHANGECOMPONENT OR DRG.No.TITLE
forwarded to you in confidence for a specific purpose.ItThis document contains proprietary information which isshall not be reproduced nor transfered to other documentsnor disclosed to others,nor used for manufacturing or anyother purpose without the prior written permission of DigitalProjection Ltd. It shall be returned immediately upon request.PROPRIETARY INFORMATION
DRAWN BS 3083rd Angle Projection
A1 DRG. No.
1212345
678910111314
A
B
C
D
E
F
G
H
J
MIDDLETON M24 1XXDIGITALPROJECTION1:1J.C21-02-12
PROJECTOR, TITAN 1080P 3D-L(PV6S)112-574
11
 
 0119-03-12OFJ.C                       
                       PROJECTOR ASSEMBLY, TITAN (PV6S)-UPDATED 21-9-12
-DRAFT COPY REMOVED-CEILING MOUNT CENTRES  ADDED
 8.675
220.4
 
 22.382
568.5  
 
20.610
523.5  
 
9.623
244.4
 
 5.739
145.8
 
 
9.971
253.3
 
 25.433
646.0  
 1.703
43.3  
 1.593
40.5  
  6.220
158.0
 
23.661601.0 GRAB RAIL CENTRES
 22.874
581.0  
 26.152
664  
A
KEYPAD ASSY
 21.353
542.4  
 6.374
161.9
 
  3.425
87.0  
AIR OUT
 24.449
621.0    
2.560
65.0  
 4.646
118.0
 
(4.449)113 (MIN)
 23.661
601.0  (10.356)263 (MAX)
MOTOR GEARBOX COVER
AIR IN
PLEASE NOTE: LENS EXTENSIONMEASURED FROM FRONT OF CORNERPOST. FOR FURTHER INFORMATION SEE USER MANUAL
4.338
110.2
 (REF)
 1.870
47.5  
  1.870
47.5  
A  (1 : 2)
M6 x 1.0 GRAB RAIL SECURING HOLES
1.772
45.0
  2.393
60.8  
 523.5 CEILING MOUNT CENTRES (REMOVE FEET) 
 601.0 CEILING MOUNT CENTRES (REMOVE FEET) 
AIR IN
UPDATESERVICE
Pb/BPr/R
IN
WIREDREMOTE
OUT
COMPONENT
SYNCY/GLAMP3 4
1 2VGADVI
1 3 7ERROR
HDMI
2
OutputSPDIFSERIALCOMP 15
LANCOMP 2S-VIDEO86
43GSDI
IR
INPUT CONNECTIONS DETAIL
DVIInput 9
DUALPIPEInput 11
3DSYNCOUTIN
DVI/HDMIInput 10
INPUT CONNECTIONS DETAIL
HOLE CENTRES FOR GRAB RAIL FIXINGS
THE FOLLOWING PROJECTORS ALL APERTAIN TO THIS LAYOUTSX+112-568 PROJECTOR, TITAN SX+ 3D-L (PV6S) 112-569 PROJECTOR, TITAN SX+ 3D-L UC (PV6S) 112-570 PROJECTOR, TITAN SX+ 3D-P (PV6S) 112-571 PROJECTOR, TITAN SX+ 3D-P UC (PV6S) 112-572 PROJECTOR, TITAN SX+ DUAL 3D (PV6S) 112-573 PROJECTOR, TITAN SX+ DUAL 3D UC (PV6S)112-593 PROJECTOR, TITAN SX+ 660 2D (PV6S) 1080P112-574 PROJECTOR, TITAN 1080P 3D-L (PV6S) 112-575 PROJECTOR, TITAN 1080P 3D-L UC (PV6S) 112-576 PROJECTOR, TITAN 1080P 3D-P (PV6S) 112-577 PROJECTOR, TITAN 1080P 3D-P UC (PV6S) 112-578 PROJECTOR, TITAN 1080P DUAL 3D (PV6S) 112-579 PROJECTOR, TITAN 1080P DUAL 3D UC (PV6S) 112-594 PROJECTOR, TITAN 1080P 660 2D (PV6S)WUXGA112-580 PROJECTOR, TITAN WUXGA 3D-L (PV6S) 112-581 PROJECTOR, TITAN WUXGA 3D-L UC (PV6S) 112-582 PROJECTOR, TITAN WUXGA 3D-P (PV6S) 112-583 PROJECTOR, TITAN WUXGA 3D-P UC (PV6S) 112-584 PROJECTOR, TITAN WUXGA DUAL 3D (PV6S) 112-585 PROJECTOR, TITAN WUXGA DUAL 3D UC (PV6S)112-794 PROJECTOR, TITAN WUXGA 660 2D (PV6S) 
 
  CAD GENERATED DRAWINGDO NOT MAKE MANUAL CHANGES
IF IN DOUBT, ASK.
Distribution Code
FINISHCODE
MATERIAL
REMARKSOFFNoREFER TODESCRIPTIONPRE REVSITEM
76
54321
SURFACES SHOULD BE EQUAL TO OR LESS THAN 0.8um (N6 CLA32)THE SURFACE TEXTURE ROUGHNESS NUMBER OF MACHINEDREMOVE ALL BURRS & SHARP EDGES. DO NOT SCALE DRAWINGDIMENSIONS IN MILLIMETRESUnless Otherwise StatedFIRST USED ON
DATEAPP.ENG.DRAWNSCALEORIGINAL
A1:SHEETDATEAPP.DO.DRAWNNOTEREV.
ANGLES ± 0° 30Decimal ± 0.005"Fractional ±1/64"IMPERIAL1     = ±0.41.0   = ±0.21.00  = ±0.11.000 = ±0.01METRIC:UNLESS OTHERWISE STATEDTOLERANCESLAST CHANGECOMPONENT OR DRG.No.TITLE
forwarded to you in confidence for a specific purpose.ItThis document contains proprietary information which isshall not be reproduced nor transfered to other documentsnor disclosed to others,nor used for manufacturing or anyother purpose without the prior written permission of DigitalProjection Ltd. It shall be returned immediately upon request.PROPRIETARY INFORMATION
DRAWN BS 3083rd Angle Projection
A1 DRG. No.
1212345
678910111314
A
B
C
D
E
F
G
H
J
MIDDLETON M24 1XXDIGITALPROJECTION1:1J.C
21-02-12
PROJECTOR, TITAN 1080P 3D-L(PV6S)112-574
11
 
 01
19-03-12OFJ.C                       
                       PROJECTOR ASSEMBLY, TITAN (PV6S)-UPDATED 21-9-12
-DRAFT COPY REMOVED-CEILING MOUNT CENTRES  ADDED
 8.675
220.4
 
 22.382
568.5  
 
20.610
523.5  
 
9.623
244.4
 
 5.739
145.8
 
 
9.971
253.3
 
 25.433
646.0  
 1.703
43.3  
 1.593
40.5  
  6.220
158.0
 
23.661
601.0 GRAB RAIL CENTRES
  22.874
581.0  
 
26.152
664  
A
KEYPAD ASSY
 21.353
542.4  
 6.374
161.9
 
  3.425
87.0  
AIR OUT
 24.449
621.0    
2.560
65.0  
 4.646
118.0
 
(4.449)113 (MIN)
 23.661
601.0  (10.356)263 (MAX)
MOTOR GEARBOX COVER
AIR IN
PLEASE NOTE: LENS EXTENSIONMEASURED FROM FRONT OF CORNERPOST. FOR FURTHER INFORMATION SEE USER MANUAL
4.338
110.2
 (REF)
 1.870
47.5  
  1.870
47.5  
A  (1 : 2)
M6 x 1.0 GRAB RAIL SECURING HOLES
1.772
45.0
  2.393
60.8  
 523.5 CEILING MOUNT CENTRES (REMOVE FEET) 
 601.0 CEILING MOUNT CENTRES (REMOVE FEET) 
AIR IN
UPDATESERVICE
Pb/BPr/R
IN
WIREDREMOTE
OUT
COMPONENT
SYNCY/GLAMP3 4
1 2VGADVI
1 3 7ERROR
HDMI
2
OutputSPDIFSERIAL
COMP 1
5
LAN
COMP 2S-VIDEO
86
43GSDI
IR
INPUT CONNECTIONS DETAIL
DVIInput 9
DUALPIPEInput 11
3DSYNC
OUTIN
DVI/HDMIInput 10
INPUT CONNECTIONS DETAIL
HOLE CENTRES FOR GRAB RAIL FIXINGS
THE FOLLOWING PROJECTORS ALL APERTAIN TO THIS LAYOUT
SX+
112-568 PROJECTOR, TITAN SX+ 3D-L (PV6S) 112-569 PROJECTOR, TITAN SX+ 3D-L UC (PV6S) 112-570 PROJECTOR, TITAN SX+ 3D-P (PV6S) 112-571 PROJECTOR, TITAN SX+ 3D-P UC (PV6S) 112-572 PROJECTOR, TITAN SX+ DUAL 3D (PV6S) 112-573 PROJECTOR, TITAN SX+ DUAL 3D UC (PV6S)112-593 PROJECTOR, TITAN SX+ 660 2D (PV6S) 
1080P
112-574 PROJECTOR, TITAN 1080P 3D-L (PV6S) 112-575 PROJECTOR, TITAN 1080P 3D-L UC (PV6S) 112-576 PROJECTOR, TITAN 1080P 3D-P (PV6S) 112-577 PROJECTOR, TITAN 1080P 3D-P UC (PV6S) 112-578 PROJECTOR, TITAN 1080P DUAL 3D (PV6S) 112-579 PROJECTOR, TITAN 1080P DUAL 3D UC (PV6S) 112-594 PROJECTOR, TITAN 1080P 660 2D (PV6S)
WUXGA
112-580 PROJECTOR, TITAN WUXGA 3D-L (PV6S) 112-581 PROJECTOR, TITAN WUXGA 3D-L UC (PV6S) 112-582 PROJECTOR, TITAN WUXGA 3D-P (PV6S) 112-583 PROJECTOR, TITAN WUXGA 3D-P UC (PV6S) 112-584 PROJECTOR, TITAN WUXGA DUAL 3D (PV6S) 112-585 PROJECTOR, TITAN WUXGA DUAL 3D UC (PV6S)112-794 PROJECTOR, TITAN WUXGA 660 2D (PV6S) 
 
  CAD GENERATED DRAWINGDO NOT MAKE MANUAL CHANGES
IF IN DOUBT, ASK.
Distribution Code
FINISHCODE
MATERIAL
REMARKSOFFNoREFER TODESCRIPTIONPRE REVSITEM
76
5
4321
SURFACES SHOULD BE EQUAL TO OR LESS THAN 0.8um (N6 CLA32)THE SURFACE TEXTURE ROUGHNESS NUMBER OF MACHINEDREMOVE ALL BURRS & SHARP EDGES. DO NOT SCALE DRAWINGDIMENSIONS IN MILLIMETRESUnless Otherwise StatedFIRST USED ON
DATEAPP.ENG.DRAWNSCALEORIGINAL
A1:SHEETDATEAPP.DO.DRAWNNOTEREV.
ANGLES ± 0° 30Decimal ± 0.005"Fractional ±1/64"IMPERIAL1     = ±0.41.0   = ±0.21.00  = ±0.11.000 = ±0.01METRIC:UNLESS OTHERWISE STATEDTOLERANCES
LAST CHANGECOMPONENT OR DRG.No.TITLE
forwarded to you in confidence for a specific purpose.ItThis document contains proprietary information which isshall not be reproduced nor transfered to other documentsnor disclosed to others,nor used for manufacturing or anyother purpose without the prior written permission of DigitalProjection Ltd. It shall be returned immediately upon request.
PROPRIETARY INFORMATION
DRAWN BS 3083rd Angle Projection
A1 DRG. No.
1212345
678910111314
A
B
C
D
E
F
G
H
J
MIDDLETON M24 1XXDIGITALPROJECTION1:1J.C
21-02-12
PROJECTOR, TITAN 1080P 3D-L(PV6S)112-574
11
 
 01
19-03-12OF
J.C                       
                       PROJECTOR ASSEMBLY, TITAN (PV6S)-UPDATED 21-9-12
-DRAFT COPY REMOVED
-CEILING MOUNT CENTRES  ADDED

All Digital Projection manuals Comments (0)

Related Manuals for Digital Projection Titan 1080p-330-3d L Or P, Titan 1080p-330-3d L Or P Ultra Contrast, Titan 1080p-660-3d, Titan 1080p-660-3d Ultra Contrast Specifications