Digital Projection Projector TITAN Quad Series Specifications

							Overview
PERFORMANCE SPECIFICATIONS
Brightness (±10%)
SX+, 1080p & WUXGA: 16,000 ANSI Lumens 
Contrast Ratio (±10%)
2000:1 Full White/Black
Display Type
3 x .95” DMD
DMD Specification
SX+: 1400 x 1050 pixels native, +/- 12 deg tilt angle
1080p: 1920 x 1080 pixels native, +/-12 deg tilt angle
WUXGA: 1920 x 1080 pixels native, +/-12 deg tilt angle
Fast transit Pixels for smooth greyscale and improved contrast.
Fill Factor
87%
Sealed Optics at DMD™ Interface
Protects DMD’s™ from optical contamination
Source Compatibility
Advanced Front End Processor:
•	 3GSDI	including	1080p	60fps,	24p	(4:4:4	 and	4:2:2)	 and	1080i.
•	 HDMI	 including	 Deep	Color	processing.
•	 Graphics	 standards	up	to	1920	 x	1200	 resolution	 at	60fps	 via	DVI 	
or	 VGA.
•	 Component	 video	(SD	and	 HD)	 via	YPr	 Pb,	RGB,	 or	RGBS.
•	 S-Video	 (PAL,	NTSC	 &	SECAM)
•	 Composite	 Video	(PAL,	NTSC	 &	SECAM).
High	 bandwidth,	 pixel	mapped	 path:
•	 Dual	 DVI	accepts	 graphics	 standards	 up	to	1920	 x1200@120fps.
•	 HDMI	 1.4	including	 3D	Standards
•	 Dual	 Pipe	(2	x	DVI	 or	HDMI)
High	 Bandwidth	 Input
•	 3D	 capable  
•	 Pixel	 Mapped	 -	with	 low	latency
•	 FastFrame™	 Motion	Blur	Reduction  
•	 120	 Hz	with	 no	frame	 doubling 	
3D Sync
Sync In - External lock
Sync Out - Shutter glass control  
 
Network	 Connection
IR	 handset	 with	wired	 option	 via	3.5mm	 jack	(with	 loop	through).
LAN	 Via	RJ45	 with	full	feature	 set	via	protocol.
Duplication	 of	OSD	 served	 from	projector	 controller	 via	RJ45.
RS232	 Via	9	Pin	 connector.
Lamp Type
Four	 x	400W	 High	Intensity	 Discharge
Lamp Life
 (typical)1Full	 Power:	 1500	hrs	(up	 to	3000	 hrs	in	lamp	 sequential	 mode)	
Eco	 Mode	 :	2000	 hrs	(up	 to	4000	 hrs	in	lamp	 sequential	 mode)
Intelligent Lens Mount
Motorised	 and	programmable	 Focus,	Zoom,	and	Vertical	
and	 Horizontal	 offsets	with	ten	positional	 memory	banks.
Lens Shift (maximum)
Fixed 1.2:1 and Zoom Lenses:
				• 	Vert:	 +0.5,	 -0.4	frame;	 Hor:	±0.2	 frame
0.73 Fixed lens: 
				• 	Vert:	 ±0.11	 frame;	 Hor:	±0.07	 frame
Lens Options
0.73 :1  fixed	 2.02-2.77	 :1	 zoom
1.2	 :1		 fixed	 2.77-4.51	 :1	 zoom
1.26-1.61	 :1	 zoom	 4.51-7.53	 :1	 zoom
1.5-2.02	 :1	 zoom	 7.5-11.2	 :1	 zoom
•	 1.2:1	 Lenses	 include	 manual	 aperture
•		 High-contrast	 lenses	available	 for	0.73:1	
			 and	 all	zoom	 lenses
Specifications subject to change without notice   DP V1.0 06/2011   ©2011 Digital Projection, Inc.
™DLP, Digital Light Processing and DMD are trademarks of Texas Instru\
ments, Inc.
TITAN Quad Series
TITAN SX+ Quad 3D  •   TITAN 1080p Quad 3D  •   TITAN WUXGA Quad 3D
Mechanical Mounting
•		Front	 or	rear	 table;		 Front	or	rear	 ceiling	
   (ceiling mount optional)
•		 Rugged,	 staging	tolerant	 chassis	with
   integrated handles
•	 Optional RapidRig™ frame	 with	integrated
			 pitch,	 roll	and	 yaw	 adjustments
Weight (chassis only)
39 kg, 86 lbs
Video	 Processing:	 Advanced	Front	End	processor:
•	 Advanced	 geometry	correction:	
	 o	 Accurate	 warp	map	generation	 by	adjustment	 of	
an interpolated grid array of up to 16 x 16 nodes.  Up 
to	 eight	 maps	 can	be	generated,	 downloaded	 and	
stored	 on	the	 projector	 for	selection	 via	the	 OSD	 or	
control application.
  o On board implementation of Pincushion & Barrel, 
Cornerstone,	 Vertical	&	Horizontal	 Keystone,	and	
Image Rotation.
•	 High	 Quality	Edge	Blending	 &	Multi	 Projector	 Tiling
	 o	 High	 bit	depth	 processing	 in	blend	 region	 to	
ensure smooth image.
	 o	 Adjustable	 S-Curve	Parameter	 and	degamma	
functions.
  o Black Level Uplift to ensure uniformity across 
blend in dark images.
  o Correction of black level uplift to compensate for 
non-active pixels at the edge of the DMD.
	 o	 The	user	 can	choose	 to	assign	 the	projector	 a	
position	 within	an	image	 matrix.		 The	video	 processing	
can automatically extract the appropriate segment of 
the input image and enable blending for the appropri-
ate edges.
•	 Single	 Stage	Scaling
	 o	 Resizing	 and	Warp	 functions	 are	carried	 out	in	
a	 single	 stage	process	 maximizing	 the	clarity	 of	the	
resulting	 image.	When	operating	 Blend	in	conjunction	
with	 Warp	 the	processing	 will	automatically	 superim-
pose	 the	warped-blend	 map,	onto	the	geometrically	
corrected image.
	 o	 The	user	 can	switch	 between	 different	sources	
and input aspect ratios, yet retain the accuracy of the 
geometrically corrected output.
•	 PIP/POP/PAP	
	 o	 User’s	 choice	 between	 inputs	for	the	 main	 and	
sub images (Picture in Picture or PIP).  The processing 
additionally	 offers	the	option	 to	display	 two	sources,	
side-by	 side,	scaled	 to	the	 vertical	 size	of	the	 panel	
Picture and Picture or PAP), or alternatively maintain-
ing their original aspect ratios (Picture Opposite Picture 
or POP).
•	 ColorMax
	 o	 Each	 projector	 is	accurately	 calibrated	at	the	
factory	 with	its	native	 primary	 colors	and	white	 point	
being stored in the on-board memory. User’s choice 
to	 employ	 the	external	 control	application	 to	download	
his	 own	 measured	 color	space,	 as	specific	 to	the	 oper-
ating environment, and also his preferred Target color 
space for primary and secondary colors.  Not only is 
this the most flexible color management technology 
available, but it also enables accurate matching of pro-
jectors	 in	tiled	 or	blended	 applications.		
•	 Dual	 Flash	Processing	 can	be	used	 to	multiply	 the	
displayed frame rate for 3D sources. 
•	 FastFrame	 motion	blur	reduction.
•	 Dual	 Pipe	processing	 allows	the	delivery	 of	two	
sources in parallel, typically one for the Left Eye and 
the other for the Right.  
•	 De-interlacing,	 Video	enhancement	 and	Frame	
Delay
The	 projector	 automatically	 detects	interlaced	 video	
and implements 3:2 or 2:2 extraction as appropriate, 
with	 pixel	 based,	 motion	 adaptive	 interpolation	 and	
auto cadence correction.
INPUT CAPABILITIESType
Composite
S-Video
Component
Interlaced/Std	 def	Y,	Cr/Pr,	 Cb/Pb,	 S
Graphics
Progressive	 RGB/Progressive	 Interlaced	Hi	def	
Y,	 Cr/Pr,	 Cb/PB	
RGBHV	 (Progressive)
Digital RGB   
Serial Digital 
SD/HD-SDI	 (SMPTE	259M/292M) 
DVI	 -	High	 bandwidth
Dual - main
Dual - sub
*The	 main	 &	sub	 dual	 DVI	inputs	 can	be	used	 in	 
parallel to support dual-pipe 3D connectivity 
Connector
BNC
4-pin mini DIN
BNCx4
BNCx5
D sub (15-pin)
DVI
BNC
DVI
DVI Quantity
1
1
1
1
1
1
1
1
1
DPI	presents	 a	revolution	 in	advanced	 3-chip	DLP	displays	 with	the	
new	 TITAN	 Quad	product	 line.	Incredibly	 compact	and	efficient	 for	
its lumen performance, the TITAN Quad series incorporates DP’s 
active 3D connectivity, advanced image Warp and Blend, Intelligent 
Lens Mount, ColorMax calibration technology, and a host of vital 
professional features to suit almost any commercial installation or 
staging application imaginable. 
As efficient as they are capable, the introduction of the 16,000 
lumen	 TITAN	Quad	lineup	 marks	 the	world’s	 first	projectors	 of	this 	
brightness,	 in	a	chassis	 with	such	 a	small	 form	factor.	 	 The	new	
TITAN	 Quad	projectors	 are	available	 in	SX+,	 1080p	 and	WUXGA 	
native	 resolution,	 and	include	 powerful	 DP	innovations	 such	as	
FastFrame, Dual-Flash Processing and CoolTek Engineering.  The 
TITAN	 Quad	represents	 the	new	 flagship	 of	DPI’s	 TITAN	 product 	
line,	 which	 now	encompasses	 over	30,	3D	capable	 precision	 dis-
plays.
Utilizing	 DPI’s	new,	advanced	 electronics,	 all	TITAN	 Quad	mod-
els	 provide	 the	user	 with	advanced	 Warp	and	Blend	 capabilities, 	
including	 the	ability	 to	make	 extensive	 geometric	 warp	correction 	
for	 screens	 with	complex	 geometry.		 Superbly	capable	edge	blend-
ing	 and	 multi-projector	 tiling	is	provided	 by	way	 of	high	 bit	depth 	
processing that ensures a seamless, contiguous image can be cre-
ated	 from	 multiple	 projectors.	 	 Additionally,	 end	users	 can	choose 	
to	 utilize	 the	TITAN	 Quad’s	 onboard	 tiling	function	 by	assigning 	
each	 projector	 a	position	 within	an	image	 matrix.	 The	video	 pro-
cessing then automatically extracts the appropriate segment of the 
input image and enables blending for the appropriate edges.  
Also included are DPI’s exclusive 3D advances that further extend 
the	 remarkable	 flexibility	engineered	 within	each	TITAN	 Quad	
display.	 	 Applications	 with	120	Hz	native	 sources	 utilize	the	High 	
Bandwidth	 input,	eliminating	 the	need	 for	frame	 doubling.	 For	60	
Hz	 3D	 applications,	 DPI’s	built-in	 Dual	Flash	 Processing™	 enables	
distribution	 of	3D	 content	 via	60	Hz	 formats	 by	frame-doubling	 the	
signal	 within	the	projector,	 producing	 the	low	 flicker	 image	 charac-
teristics	 of	a	native	 120	Hz	source	 without	 the	infrastructure	 costs	
associated	 with	distributing	 and	switching	 ultra-high	 bandwidth	
signals.  
As	 is	the	 case	 with	all	Digital	 Projection	 displays,	our	careful	 engi-
neering	 guarantees	 TITAN	projectors	 provide	remarkable	 resolu-
tion,	 color	 saturation	 and	light	 output	 for	years	 to	come.	 Equally 	
important, DPI’s legacy in providing superior customer and techni-
cal	 services	 assures	our	experienced	 support	staff	is	always	 avail-
able to address your needs.
The	 TITAN	 Quad...	 now,	Four	is	More. 		
 1080p-3D sx+ 3D WUXGA-3D
PRELIMINARY 
						

							Native Color TemperatureHDTV Formats Supported Scan Rates Supported
Remote Control
Automation Control
Operating/Storage Temperature
Operating Humidity
Thermal Dissipation  Fan Noise
Power Requirements Power Consumption PARAMETERS
Projectors 
   Part #TITAN sx+ Quad 3D     111-869
TITAN 1080p Quad 3D     111-872
TITAN WUXGA Quad 3D      111-875
Accessories     Part #TITAN Quad 3D Lamp & Housing* (4 required)    111-896A
RapidRigTM Frame     107-956
TITAN  Quad 3D Series Adjustable Ceiling Mount  111-897A
Infrared Remote (Replacement)      105-023
* Includes high-performance replacement air filter(s)
1 Based on 4-6 hour/day operational profile.  Venue and application condit\
ions may 
impact actual lamp life.
  See Digital Projection’s Product Warranty Statement for details on la\
mp warranty.
  Installations requiring horizontal or vertical tilt orientations greater\
 than 15 degrees 
may reduce the actual operational hours of one of the two lamps.
ADVANCED TECHNICAL SPECIFICATIONS
SX+ Lenses  HB Part #  HC Part #
0.73:1  105-607 107-195
1.2:1  105-608 105-608
1.2:1 (short)  105-609  105-609
1.26 - 1.61:1  109-236  109-359
1.5 - 2.02:1  105-610  107-196
2.02 - 2.77:1  105-611  107-197
2.77 - 4.51:1  105-612  107-198
4.51 - 7.53:1  105-613  107-199
7.5 - 11.2:1  109-235  109-358
shown with optional rigging frame
DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD, SUITE 115  KENNESAW, GA. 30144 • T: 770.420.1350 • F: 770.420.1360 • www.digitalprojection.com
DIGITAL PROJECTION, LTD. • GREENSIDE WAY, MIDDLETON  MANCHESTER, UK. M24 1XX • T: +44.161.947.3300 • F: +44.161.684.7674 • www.digitalprojection.co.uk
DIGITAL PROJECTION, CHINA • TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG  DISTRICT  BEIJING, PR CHINA 100101 • T: +86.10.58239771• F: +86 10 58239770
DIGITAL PROJECTION,  ASIA • 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 • T: +65.6284.1138 • F: +65.6284.1238
Projector Dimensions
TITAN Quad Series
Projector	dimensions	 (in)
L1	 24.4			 W1	21.3			 H1	10.2
TMCORE TECHNOLOGY
Projector	 dimensions	 (mm)
L1	 620			 W1	540			 H1	258
 1080p-3D sx+ 3D WUXGA-3D
PRELIMINARY
Native	 Color	Temperature:	 User	Selectable	 from	3200K,	 to	10000K
Signal	 formats	 480i,	576i	480p,	 576p,	720p,	1080i	(50,	59.94	 and	60Hz)	 and	1080p	 (23.98,	 24,	25,	29.97	 and	30Hz).
The	 3GSDI	 Input	supports	 SD-SDI,	HD-SDI	and	3G-SDI	 YCbCr	4:2:2	serial	 digital	 component	 video.		SMPTE	 292M,	SMPTE	
259M-C and SMPTE 424M compliant.  Accepts 484i, 576i, 720p, 1080i and 10\
80p Single link formats at 270Mb, 1.485Gb or  2.97Gb	rates.	Stream	 A	&	 Stream	 B-switchable.
HDMI	 &	DVI	 Inputs	 -	HDMI	 1.3	with	 or	without	 HDCP,	36	bit	video	 compatible.
DVI-D	 input	with	or	without	 HDCP.
Addressable	 IP	remote	 control,	 wireless	 and	wired	 with	loop	 through.		 On	Board	 keypad.
LAN	 connection	 via	RJ45/RS232	 9	pin	 D	Type.
Operating 0-40C.  Storage -10 to +50C 20 to 80% non-condensing
7161 BTU/hr
TBA
200-265VAC		 50/60Hz	Single	Phase.
2100 Watts
1080p & 
WUXGA Lenses  HB Part #  HC Part #
0.67:1  105-607 107-195
1.12:1  105-608 105-608
1.16 - 1.49:1  109-236  109-359
1.39 - 1.87:1  105-610  107-196
1.87 - 2.56:1  105-611  107-197
2.56 - 4.16:1  105-612  107-198
4.16 - 6.96:1  105-613  107-199
6.92 - 10.36:1  109-235  109-358