Digital Projection Projector Titan Pro Series II Specifications

							Specifications subject to change without notice   DP V4 
06/08  ©2008 Digital Projection, Inc.
INPUT CAPABILITIES
TITAN Pro Series II
Overview
PERFORMANCE SPECIFICATIONS
Brightness  (±10%)
1080p-500:  6,000 ANSI Lumens 
1080p-600M:  8,000 ANSI Lumens
1080p-700:  10,000 ANSI Lumens
Ultra Contrast:  5,000 ANSI Lumens
Contrast Ratio  (±10%)
1080p-500/600M/700: 2000:1
1080p  Ultra Contrast: 5000:1
Display Type
3 x .95” Dark Metal 1080p DMD™ with   
Fast Transit Pixels for smooth   
greyscale and improved contrast
DMD Specification
1920 x 1080 pixels native, 12˚ tilt angle
Fill Factor
87%
Sealed Optics at DMD™ Interface
Protects DMD’s™ from optical contamination
Source Compatibility
•   Composite, s-video, and color difference   
  video standards 
•  RGB graphics standards up to 1920 x   
  1080 
•   DVI standards with HDCP compliance
•  High definition RGB and color difference   
  standards
•  High definition / standard definition serial    
  digital formats (SD/HD-SDI) (from 4/08)
Video Processing
• Enhanced 7 point color correction
• Xenon Color Mode - User selectable yellow   
  notch filter and xenon-color mode   
  processing, enable the projector to closely   
  replicate xenon lamp spectral performance. 
•    Class leading Video de-interlacing/process-
ing of SD and HD sources using auto 3:2 
and 2:2 extraction, ruggedized for editing 
discontinuities
• Pixel-based motion adaptive interpolation
• User selectable preset, parametric 
  de-gamma and user downloadable 
  de-gamma
• Frame Delay: as low as 1 frame, source   
  dependant
• Auto mode selection - plug and play setup Network Connection
LAN via RJ 45, Wireless 802.11b,
full protocol feature set
Lamp Type
1080p-500: 
     Twin High Intensity Discharge
                      module (2 x 250W lamps)
1080p-600M:    Dual HID modules (2 x 300W)
1080p-700:    Dual HID modules (2 x 350W)
Lamp Life
 (typical)11080p-500:    1500 hours dual lamp mode / 
3000 hours single lamp mode
1080p-600:    2000 hours / 4000 hours
1080p-700:   
2000 hours / 4000 hours
Lens Mount
Zoom: Motorized horizontal and vertical 
lens shift, zoom and focus, 
Fixed: Manual Focus.
Lens Shift  (maximum)
Fixed 1.12 and Zoom Lenses:
Vert: +0.7, -0.5 frame
Hor: ±0.1875 frame
0.67 Fixed lens: 
Vert: ±0.1 frame; Hor: ±0.1 frame
Lens Options
0.67     :1 fixed
1.12          :1  fixed  (1.2-2.0m throw)
1.12          :1  fixed (3-15m throw)
1.39-1.87  :1 zoom
1.87-2.56  :1 zoom
2.56-4.16  :1 zoom
4.16-6.96  :1 zoom
• 1.12:1 Lenses include manual aperture
•    High-contrast lenses available for 0.67:1 
and all zoom lenses
Mechanical Mounting
•    Front or rear table;  Front or rear ceiling 
(ceiling mount optional)
•    Rugged, staging tolerant chassis with  
integrated handles
•    Optional rigging /stacking frame with 
        integrated pitch, roll and yaw adjust-
ments
Weight  (chassis only)
1080p-500:59.5 lbs (27 kg)
1080p-600M/700/UC: 68 lbs (31kg) Digital  Projection  International  (DPI),  Texas  Instruments’ 
first DLP™ partner and the original innovator of the 3-chip 
DLP™  projector,  proudly  introduces  the  newest  of  our 
compact  1080p  Pro  Series  II  Displays,  the  TITAN  Pro 
1080p-500, 600M, 700 and 
Ultra Contrast.
Weighing in at just 59.5 and 68 lbs., the twin-lamp TITAN 
1080p-500  and  dual  lamp  1080p-600M,  700  and  Ultra 
Contrast  displays  employ  the  latest  in  Texas  Instruments’ 
1080p  dark  metal,  3-chip  DLP™  technology  to  deliver  up 
to  10,000  lumens  and  up  to  5000:1  contrast.    Compact, 
robustly  built  and  ultra-quiet  for  their  performance  class, 
TITANs  are  unmatched  solutions  for  staging,  command 
and  control,  visualization,  business,  and  educational 
venues.    For  staging,  the  TITAN  can  be  ordered  with 
DP’s  RapidRig  flying  and  stacking  frame,  which  provides 
integrated  pitch,  roll  and  yaw  adjustments,  simplifying 
installation and alignment accuracy.
Other key benefits of the TITAN 1080p line include:
•    DP’s  NextGen  electronics,  featuring  class  leading  de-interlacing 
with  SD  and  HD  sources  processed  using  auto  3:2  and  2:2 
extraction   
•    Minimal  video  delay  from  input  to  screen  -  as  low  as  1  frame, 
depending on source 
•    Sealed  optics  to  protect  DMD’s  and  other  focal  plane  compo-
nents from airborne contaminants  
•    Seven  user-selectable  inputs,  including  HDCP  compliant  DVI 
plus SD/HD-SDI 
•    ColorMax  calibration  capabilities  including  enhanced  seven-
point color correction for broader color space and accurate color 
alignment
•    User  selectable  Xenon-color  mode  processing,  which  enables 
the  projector  to  closely  replicate  the  spectral  performance  of  a 
Xenon lamp
•    Twin  (1080p-500)  or  Dual  (1080p-600M/700/Ultra  Contrast)  high 
intensity discharge lamps, which can be run individually or simul-
taneously, with a typical life of up to 2000 hours per lamp
•    A  range  of  precision  optics  with  extended  lens  shift,  compatible 
with all TITAN and LIGHTNING sx+ and 1080p models 
•    DP’s  CoolTek  engineering,  which  delivers  the  highest  lumen 
performance  with  the  lowest  thermal  (BTU)  and  noise  level  (dB) 
output 
The  TITAN  1080p-500  and  1080p-600M,  700  and  Ultra 
Contrast  Pro  Series  II  displays  are  priced  and  sized  for 
every venue and everyday use - bringing the precision of 
Digital Projection to your venue.
Type
Composite
S-Video
Component
Interlaced/Std def Y, Cr/Pr, Cb/Pb, S
Graphics
Progressive RGB/Progressive Interlaced 
Hi def Y, Cr/Pr, Cb/PB 
RGBHV (Progressive)
Digital RGB   
Serial Digital 
SD/HD-SDI (SMPTE 259M/292M) Connector
BNC
4-pin mini DIN
BNCx4
BNCx5
D sub (15-pin)
DVI
BNC
Quantity
1
1
1
1
1
1
1
TITAN 1080p-500 • TITAN 1080p-600M • TITAN 1080p-700 • TITAN 1080p  Ultra Contrast
(& Ultra Contrast)
(&  Ultra Contrast) 
						

							Projector Dimensions
TITAN 1080p-700 side panel
1 Based on 4-6 hour/day operational profile.  Venue and application conditions may impact actual lamp life.
  See Digital Projection’s Product Warranty Statement for details on lamp warranty.
  Installations requiring horizontal or vertical tilt orientations greater than 15 degrees may reduce the     
  actual operational hours of one of the two lamps.
Lenses    HB Part #0.67:1  105-607 
1.12:1   105-608 
1.12:1 (short)    105-609
1.39 - 1.87:1    105-610
1.87 - 2.56:1    105-611
2.56 - 4.16:1    105-612
4.16 - 6.96:1    105-613
TMCORE TECHNOLOGY
PARAMETERS
TITAN Pro Series II
Projector dimensions (in)
L1 22.1   W1 20.7   H1 10 
Projector dimensions (mm) L1 561   W1 525   H1 254Projector dimensions (in)
L1 26   W1 21.5   H1 10 
Projector dimensions (mm)
L1 646   W1 544   H1 254500 Series 600/700 Series & Ultra Contrast
Accessories         
Part #Twin 250 Watt Lamp & Housing      001-742
300 Watt Lamp & Housing* (2 required)    107-694
350 Watt Lamp & Housing* (2 required)    108-772
RapidRig
TM Frame          107-956
TITAN 500 Series Adjustable Ceiling Mount    105-021
TITAN 600M/700/UC Series Adjustable Ceiling Mount  108-499
Infrared Remote (Replacement)      105-023
* Includes high-performance replacement air filter(s)
Native Color Temperature
HDTV Formats Supported Scan Rates Supported Remote Control
Automation Control
Operating/Storage Temperature Operating Humidity
Thermal Dissipation  Fan Noise
Power Requirements Power Consumption6500°K ±1000°K; white balance-adjustment: 3000°K to 10000°K
User selectable Xenon-like colorimetry using dynamic optical and electronic enhancement.
  1080i (50Hz, 60Hz), 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080 24sf, 720p (50, 60Hz), 480i, 480p
Horizontal: 15kHz to 100kHz / Vertical: 24Hz to 85Hz
 
Addressable IR remote control, wireless and wired with loop-through / On board invertable keypad
 
 LAN connection via RJ45  / RS232 9-pin D type 
Operating: 0 to 40°C / Storage: -10 to 50°C
20 to 80% non-condensing
 
  2,600 BTU/hr  2,900 BTU/hr
Less than 42dBA             Less than 45dBA 100-240 VAC ±10%, 50/60Hz single phase 
  750 watts maximum  850 watts maximum 950 watts maximum
ADVANCED TECHNICAL SPECIFICATIONSshown with optional rigging frame
DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD, SUITE 115  KENNESAW, GA. 30144 • T: 770.420.1350 • F: 770.420.1360 • www.digitalprojection.com
DIGITAL PROJECTION, LTD. • GREENSIDE WAY, MIDDLETON  MANCHESTER, UK. M24 1XX • T: +44.161.947.3300 • F: +44.161.684.7674 • www.digitalprojection.co.uk
DIGITAL PROJECTION, CHINA • TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG  DISTRICT  BEIJING, PR CHINA 100101 • T: +86.10.58239771• F: +86 10 58239770
DIGITAL PROJECTION,  ASIA • 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 • T: +65.6284.1138 • F: +65.6284.1238
Projectors  Part #TITAN 1080p-500  108-642
TITAN 1080p-600M  108-716
TITAN 1080p-700  108-722
TITAN 1080p  Ultra Contrast  108-781