Digital Projection Projector M-Vision 930 WUXGA 3D Specifications

							Specification Sheet
M-Vision 930 WUXGA 3D
12,000 ANSI Lumens | Contrast Ratio: 5,000:1 (Dynamic Black) 2,000:1 native | Part No:114-259
Colour System: DMD Specification:
6 Segment RGBYCW Colour Wheel 
Display Type:
1 x 0.96 DarkChip™ DMD™ 1920 x 1200 pixels native.
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
16x10
Fill Factor
87%
Key Features
Video & Graphics Processing
HDMI 1.4 for Side by Side, Frame Packing & Top Bottom Formats.
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
Dual Pipe Processing: Two sources in parallel for Left and Right Eyes.
Synchronisation of active glasses, DLP® Link™ glasses or polarising switcher.
High Bandwidth Digital & Analog Receiver with 10 Bit A-D.
The projector automatically detects interlaced video and implements 3:2 or 2:2 extraction as appropriate, with 
pixel based, motion adaptive interpolation and auto cadence correction.
24p and 1080p native display.
Geometry Correction
Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
Blanking control for custom input window sizing.
Edge Blending 
Correction for non-active pixels at the edge of the display.
HDBaseT® Interface
Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
Allows projector to be placed up to 80m from source with low cost cabling.
Source Compatibility:
HDMI including Deep Color™ processing and 3D standards.
Dual Link DVI accepts graphics standards up to 1920 x 1200 at 120Hz.
Graphics standards up to 1920 x 1200 resolution at via DVI, HDMI or VGA.
Component Video (SD and HD) via YPrPb or RGB. 
						

							Inputs/Outputs  
 Video & Computer
Type Connector Qty
HDMI 1.4
DVI - Dual Link DVI-D
HDBaseT
VGA
Component Video
Component Video HDMI
DVI
RJ45
15-pin D-Sub
3 x BNC
3 x RCA 2
1
1
1
1
1  Communication & Control
Type Connector Qty
3D Sync Out
3D Sync In
LAN
RS232
IR Input
12V Trigger
Service Port BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type A 1
1
1
1
1
2
1
3D Formats Supported HDTV Formats Supported
Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half) 
Top and Bottom 1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 
59.94Hz, 60Hz), 1080i (50Hz, 59.94Hz, 60Hz), 720p 
(50Hz, 59.94Hz, 60Hz)
Computer Compatibility Bandwidth
Up to 1920 x 1200 170 MHz on analog RGB
165 Megapixels per second on HDMI and DVI
297 Megapixels per second on Dual Link DVI
Remote Control Automation Control
IR Remote Control
On-Board keypad LAN
RS232
Colour Temperature  
User selectable from 5400 to 9300K  
Lamp Type Typical Lamp Life
2 x 465W High Intensity Discharge 1500 hours
Lenses
Lens Part No. Focus Range Lens Shift
0.84 - 1.03 : 1 zoom
1.56 - 1.86 : 1 zoom
1.85 - 2.40 : 1 zoom
2.40 - 4.00 : 1 zoom 114-313
114-314
114-315
114-316 1.5m - 10m
2m - 12.4m
2.5m - 15.9m
4m - 26.6m Vert: 0.37 (U) 0.37 (D) frame, Hor: 0.12 (L) 0.12 (R) frame
Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
Lens Mount
Motorised shift, zoom and focus.
Mechanical Mounting Orientation
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet Table Top or Inverted:  Yes 
Pointing Up:         Yes 
Pointing Down:    Yes 
Roll (Portrait):      +/-10° from horizontal
Power Requirements Power Consumption
100 - 240VAC 50/60Hz single phase 1200W
Thermal Dissipation Fan Noise
3771 BTU/Hour 48 dBA
Operating/Storage Temperature Operating Humidity 
Operating: 0 to 35C (32 to 95F)
Storage: -20 to 60C (-4 to 140F) 20% to 90% non-condensing
Weight (Chassis Only) Dimensions
 28.6 kg 
63.1 lb  L: 63.2 cm W:50 cm H:24 cm
L: 24.9 in W:19.7 in H:9.4 in
Safety & EMC Regulations
CE, FCC Class A , UL, CCC  
*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this  
						

							display for more accurate information.
Downloads  
PDF CAD Drawings
AUTOCAD Drawings User Guides
Important Information
Specifications subject to change without notice. Digital Projection version: - ©2012 Digital Projection.
DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc
DIGITAL PROJECTION, INC  55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144
T: 770.420.1350 | F: 770.420.1360 |  www.digitalprojection.com
DIGITAL PROJECTION, LTD  GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX 
T: +44.161.947.3300 | F: +44.161.684.7674 |  www.digitalprojection.co.uk
DIGITAL PROJECTION, CHINA  TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG DISTRICT BEIJING, 
PR CHINA 100101 
T: +86.10.58239771 | F: +86 10 58239770
DIGITAL PROJECTION, ASIA  16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204
T: +65.6284.1138 | F: +65.6284.1238