Home
>
Digital Projection
>
Projector
>
Digital Projection Projector IVision 50 Scope 1080p XB Specifications
Digital Projection Projector IVision 50 Scope 1080p XB Specifications
Have a look at the manual Digital Projection Projector IVision 50 Scope 1080p XB Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Specification Sheet iVision 50 Scope 1080p XB (Preliminary) 2,000 ANSI Lumens | Contrast Ratio: 5,300:1 | Part No: Colour System: DMD Specification: XB Color Wheel - Balanced Luminance and Chroma - Best Overall Performance Display Type: 1 x 0.95 DarkChip™ DMD™ 2560 x 1080 pixels native, +/- 12° tilt angle Fast transit pixels for smooth greyscale and improved contrast. Aspect Ratio: 21x9 Fill Factor 87% Key Features Video & Graphics Processing Native 2.37:1 DMD resolution enables constant height systems with no anamorphic lens. HDMI 1.4 for Side by Side, Frame Packing & Top Bottom 3D Formats. Dual Head 3D converts any two L/R single stream signals to one sequential 120Hz 3D stream. Synchronisation of active glasses, DLP Link™ glasses or polarising switcher. Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display). 24p and 1080p native display. FastFrame™ Smear Reduction. Frame lock sync for multi-channel applications. ColorMax™ Accurate matching of projectors in tiled or blended applications. User selection and storage of primary and secondary color targets. HDBaseT® Interface Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable. Allows projector to be placed up to 100m from source with low cost cabling. Source Compatibility: HDMI including Deep Color™ processing and 3D standards. Dual Link DVI accepts graphics standards up to 1920 x 1200 at 120Hz. 3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant. Graphics standards up to 1920 x 1200 resolution at via DVI, HDMI or VGA.
Inputs/Outputs Video & Computer Type Connector Qty DisplayPort 1.2 Dual Link DVI-D HDMI 1.4 VGA 3GSDI HDBaseT DisplayPort DVI-I HDMI Type A 15-pin D-Sub BNC RJ45 2 1 1 1 2 1 Communication & Control Type Connector Qty LAN RS232 Service Port Sync Sync RJ45 9-pin D Sub USB Type A BNC 3-pin mini-DIN 1 1 1 2 1 3D Formats Supported HDTV Formats Supported Frame Packing Frame Sequential Side By Side (half) Top and Bottom 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz) Computer Compatibility Bandwidth Up to 1920 x 1200 205 MHz on analog RGB 165 Megapixels per second on DVI and HDMI 297 Megapixels per second on Dual Link DVI Remote Control Automation Control IR remote control On-Board keypad RS232 LAN Colour Temperature User selectable from 3200 to 9300K Lamp Type Typical Lamp Life 1 x 350W UHP Full Power: 2000 hours Eco Mode : 2500 hours Lenses Lens Part No. Focus Range Lens Shift 0.79 : 1 fixed 0.99 : 1 fixed 0.86 - 1.16 : 1 zoom 1.14 - 1.74 : 1 zoom 1.71 - 2.37 : 1 zoom 2.67 - 4.16 : 1 zoom 115-487 115-486 115-488 115-489 115-485 115-784 0.8m - 3.3m 1m - 10m 0.8m - 5m 1.3m - 7m 1.5m - 10m 5m - 25m TBD Lens Mount Motorized shift. Manual zoom and focus. Mechanical Mounting Orientation Front/Rear Table Front/Rear Ceiling Adjustable Front/Rear Feet Table Top or Inverted: Yes Pointing Up: Yes Pointing Down: Yes Roll (Portrait): +/-20° from horizontal Power Requirements Power Consumption 100-240 VAC, 50/60Hz 530W Thermal Dissipation Fan Noise 1807 BTU/Hour TBA Operating/Storage Temperature Operating Humidity Operating: 10° to 40° C Storage: -20° - 60° C 20% to 80% RH Weight (Chassis Only) Dimensions 7.5 kg 16.5 lb L: 30.6 cm W: 34.2 cm H: 14.3 cm L: 12.05 in W: 13.46 H: 5.63 in Safety & EMC Regulations
CE, FCC Class A, UL, cUL and cCSAus Accessories Accessory Part No. *Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information. Downloads PDF CAD Drawings AUTOCAD Drawings User Guides Important Information Specifications subject to change without notice. Digital Projection version: 1 - 22-May-13 ©2012 Digital Projection. DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc DIGITAL PROJECTION, LTD GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX T: +44.161.947.3300 | F: +44.161.684.7674 | www.digitalprojection.co.uk DIGITAL PROJECTION, INC 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144 T: 770.420.1350 | F: 770.420.1360 | www.digitalprojection.com DIGITAL PROJECTION, CHINA TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG DISTRICT BEIJING, PR CHINA 100101 T: +86.10.58239771 | F: +86 10 58239770 DIGITAL PROJECTION, ASIA 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 T: +65.6284.1138 | F: +65.6284.1238