Digital Projection Projector INSIGHT 4K Dual LED Specifications

							Specification Sheet
INSIGHT 4K Dual LED (Preliminary)
3,000 ANSI Lumens | Contrast Ratio: 2,000:1 | Part No:TBA
Colour System: DMD Specification:
3-chip DLP®
Display Type:
3 x 1.38 DarkChip™ DMD™ 4096 x 2160 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
1.90:1
Fill Factor
87%
Key Features
Video & Graphics Processing
Up to 60fps 4096 x 2160 pixels sequential input via single cable (Display Port 1.2)
3D Capable
Scaling of HDMI 1.4 formats to fill the 4K display
Dark Time insertion capability
HDMI 1.4b up to 3840 x 2160 at 30 fps.
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
Synchronisation of active glasses or polarising switcher.
Color adjustments
Up to 12 bits per color processing (depending on source and input type).
Degamma table maps 12 bit input to 16 bit palette (R, G & B) for display.
Individual R, G & B lift and gain.
Black and White level adjustment via Brightness & Contrast control.
Degamma selection from a list of parametric curves.
ColorMax™
Accurate matching of projectors in tiled or blended applications.
User selection and storage of primary and secondary user defined color targets up to 7 points.
3D Functionality
Full 4K 3D display capability
Frame multiplication capability (2x, 3x) with interleaving of Left/Right repeated frames.
Synchronisation of active glasses or polarising switcher.
Adjustable Dark Time and Synch Offset for optimisation of ghosting and smooth greyscale for switching glasses 
and polarizers.
Projector Control 
						

							Keypad.
Wired remote control.
Network control via RJ45 and protocol.
Group Controller Application
Source Compatibility:
Graphics standards up to 4096 x 2160 at 60 fps via DisplayPort. 30 fps via HDMI.
Inputs/Outputs  
 Video & Computer
Type Connector Qty
DisplayPort 1.2
HDMI 1.4 DisplayPort
HDMI 2
2  Communication & Control
Type Connector Qty
3D Sync Out
3D Sync In
LAN
RS232
Wired Remote In
Service Port BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
USB Type A 1
1
1
1
1
1
3D Formats Supported HDTV Formats Supported
Frame Packing (Q4 2015)
Dual Pipe (Q4 2015)
Frame Sequential
Side By Side (half) (Q4 2015)
Top and Bottom (Q4 2015) 4096 x 2160p (24, 25, 30, 50, 59.94, 60 Hz)
3840 x 2160p (24, 25, 30, 50, 59.94, 60 Hz) 
1080p (24, 25, 30, 50, 59.94, 60 Hz)
Computer Compatibility Bandwidth
Up to 4096 x 2160 N/A
Remote Control Automation Control
Wired remote control 
On-Board keypad RS232
LAN
Colour Temperature  
User selectable from 3300 to 10000K  
Lamp Type Typical Lamp Life
LED 60,000 hours
Lenses
Lens Part No. Focus Range Lens Shift
0.93:1 fixed
1.13 - 1.72:1 zoom
1.65 - 2.60:1 zoom
2.53 - 4.98:1 zoom 116-087
115-627
115-630
115-632 TBD - 3.6m 8m - 100m 8m - 100m TBD - 
TBD Vert: 0.175 (U) 0.175 (D) frame, Hor: 0.055 (L) 0.055 (R)
Vert: 0.275 (U) 0.275 (D) frame, Hor: 0.09 (L) 0.09 (R) frame 
(Preliminary)
Vert: 0.275 (U) 0.275 (D) frame, Hor: 0.09 (L) 0.09 (R) frame 
(Preliminary)
Vert: 0.325 (U) 0.325 (D) frame, Hor: 0.105 (L) 0.105 (R) frame 
(Preliminary)
Lens Mount
Motorised shift, zoom and focus. Intelligent Lens Memory with user-definable preset positions.
Mechanical Mounting Orientation
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Optional RapidRig™ frame with integrated pitch, roll and 
yaw adjustments. Table Top or Inverted:  Yes 
Pointing Up:         Yes 
Pointing Down:    No 
Roll (Portrait):      No
Power Requirements Power Consumption
100 - 240VAC 50/60Hz single phase 550W
Thermal Dissipation Fan Noise
1875 BTU/Hour TBD
Operating/Storage Temperature Operating Humidity 
Operating: 0 to 40C (32 to 104F) 
Storage: -10 to 50C (14 to 122F) 20 to 80% non-condensing 
						

							Weight (Chassis Only) Dimensions
 TBD kg 
TBD lb  H: 32.5 cm W: 70.0 cm L: 93.5 cm 
H: 12.8 in W: 27.56 in L: 36.8 in
Safety & EMC Regulations
CE, FCC Class A  
Accessories
Accessory Part No.
RapidRig™ Frame
Ceiling Mount
Replacement Filter Set 116-064
116-065
TBD
*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this 
display for more accurate information.
Downloads  
Specifications subject to change without notice. Digital Projection version: 1.4 - 14-Aug-13 ©2012 Digital Projection.
DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc
DIGITAL PROJECTION, LTD  GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX 
T: +44.161.947.3300 | F: +44.161.684.7674 |  www.digitalprojection.co.uk
DIGITAL PROJECTION, INC  55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144
T: 770.420.1350 | F: 770.420.1360 |  www.digitalprojection.com
DIGITAL PROJECTION, CHINA  TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG DISTRICT BEIJING, 
PR CHINA 100101 
T: +86.10.58239771 | F: +86 10 58239770
DIGITAL PROJECTION, ASIA  16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204
T: +65.6284.1138 | F: +65.6284.1238