Digital Projection Projector INSIGHT 4K 930 Specifications
Have a look at the manual Digital Projection Projector INSIGHT 4K 930 Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Specification Sheet INSIGHT 4K 930 (Preliminary) 17,500 ANSI Lumens | Contrast Ratio: 2000:1 | Part No:TBA Colour System: DMD Specification: 3-chip DLP® Display Type: 3 x 1.38 DarkChip™ DMD™ 4096 x 2160 pixels native. Fast transit pixels for smooth greyscale and improved contrast. Aspect Ratio: 1.90:1 Fill Factor 87% Key Features Video & Graphics Processing Up to 60fps 4096 x 2160 pixels sequential input via single cable (Display Port 1.2) 3D Capable Scaling of HDMI 1.4 formats to fill the 4K display Dark Time insertion capability HDMI 1.4b up to 3840 x 2160 at 30 fps. Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display). Synchronisation of active glasses or polarising switcher. Color adjustments Up to 12 bits per color processing (depending on source and input type). Degamma table maps 12 bit input to 16 bit palette (R, G & B) for display. Individual R, G & B lift and gain. Black and White level adjustment via Brightness & Contrast control. Degamma selection from a list of parametric curves. ColorMax™ Accurate matching of projectors in tiled or blended applications. User selection and storage of primary and secondary user defined color targets up to 7 points. 3D Functionality Full 4K 3D display capability Frame multiplication capability (2x, 3x) with interleaving of Left/Right repeated frames. Synchronisation of active glasses or polarising switcher. Adjustable Dark Time and Synch Offset for optimisation of ghosting and smooth greyscale for switching glasses and polarizers. Projector Control
Keypad. Wired remote control. Network control via RJ45 and protocol. Group Controller Application Source Compatibility: Graphics standards up to 4096 x 2160 at 60 fps via DisplayPort. 30 fps via HDMI. Inputs/Outputs Video & Computer Type Connector Qty DisplayPort 1.2 HDMI 1.4 DisplayPort HDMI 2 2 Communication & Control Type Connector Qty 3D Sync Out 3D Sync In LAN RS232 Wired Remote In Service Port BNC BNC RJ45 9-pin D Sub 3.5mm Stereo Jack USB Type A 1 1 1 1 1 1 3D Formats Supported HDTV Formats Supported Frame Packing (Q4 2015) Dual Pipe (Q4 2015) Frame Sequential Side By Side (half) (Q4 2015) Top and Bottom (Q4 2015) 4096 x 2160p (24, 25, 30, 50, 59.94, 60 Hz) 3840 x 2160p (24, 25, 30, 50, 59.94, 60 Hz) 1080p (24, 25, 30, 50, 59.94, 60 Hz) Computer Compatibility Bandwidth Up to 4096 x 2160 N/A Remote Control Automation Control Wired remote control On-Board keypad RS232 LAN Colour Temperature Adjustable Lamp Type Typical Lamp Life 2 x 465W High Intensity Discharge Full Power: 1500 hours (up to 6000 hours in lamp sequential mode) Eco Mode : 2000 hours (up to 8000 hours in lamp sequential mode) Lenses Lens Part No. Focus Range Lens Shift 0.93:1 fixed 1.13 - 1.72:1 zoom 1.65 - 2.60:1 zoom 2.53 - 4.98:1 zoom 116-087 115-627 115-630 115-632 TBD - 3.6m 8m - 100m 8m - 100m TBD - TBD Vert: 0.175 (U) 0.175 (D) frame, Hor: 0.055 (L) 0.055 (R) Vert: 0.275 (U) 0.275 (D) frame, Hor: 0.09 (L) 0.09 (R) frame (Preliminary) Vert: 0.275 (U) 0.275 (D) frame, Hor: 0.09 (L) 0.09 (R) frame (Preliminary) Vert: 0.325 (U) 0.325 (D) frame, Hor: 0.105 (L) 0.105 (R) frame (Preliminary) Lens Mount Motorised shift, zoom and focus. Intelligent Lens Memory with user-definable preset positions. Mechanical Mounting Orientation Front/Rear Table Front/Rear Ceiling Adjustable Front/Rear Feet Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments. Table Top or Inverted: Yes Pointing Up: Yes Pointing Down: No Roll (Portrait): No Power Requirements Power Consumption 200-240VAC 50/60Hz single phase 2100WW Thermal Dissipation Fan Noise 7165 BTU/Hour BTU/Hour 48 dBA Operating/Storage Temperature Operating Humidity
Operating: 0 to 40C (32 to 104F) Storage: -10 to 50C (14 to 122F) 20 to 80% non-condensing Weight (Chassis Only) Dimensions H: 32.5 cm W: 70.0 cm L: 93.5 cm H: 12.8 in W: 27.56 in L: 36.8 in Safety & EMC Regulations CE, FCC Class A *Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information. Image not found http://www.digitalprojection.co.uk/digital-products/images/4kuhp-930-cad.jpg Downloads Specifications subject to change without notice. Digital Projection version: - ©2012 Digital Projection. DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc DIGITAL PROJECTION, INC 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144 T: 770.420.1350 | F: 770.420.1360 | www.digitalprojection.com DIGITAL PROJECTION, LTD GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX T: +44.161.947.3300 | F: +44.161.684.7674 | www.digitalprojection.co.uk DIGITAL PROJECTION, CHINA TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG DISTRICT BEIJING, PR CHINA 100101 T: +86.10.58239771 | F: +86 10 58239770 DIGITAL PROJECTION, ASIA 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 T: +65.6284.1138 | F: +65.6284.1238