Digital Projection Projector HIGHlite Dual 660 Series Specifications

							Overview
PERFORMANCE SPECIFICATIONS
Brightness (±10%)
1080p & WUXGA: 8,000 ANSI Lumens 
Contrast Ratio (±10%)
2000:1 Full White/Black
Display Type
1080p: .65” Darkchip DMD
WUXGA: .67” Darkchip DMD
DMD Specification
1080p: 1920 x 1080 pixels native, +/-12 deg tilt angle
WUXGA: 1920 x 1080 pixels native, +/-12 deg tilt angle
Fast transit Pixels for smooth greyscale and improved contrast.
Fill Factor
84%
Sealed Optics at DMD™ Interface
Protects DMD’s™ from optical contamination
Source Compatibility
3GSDI including 1080p 60fps, 24p (4:4:4 and 4:2:2) and 1080i
HDMI including deep color processing
Graphics standards up to 1920 x 1200 resolution at 60fps via DVI 
or VGA
Component video (SD and HD) via YPr Pb, RGB, or RGBS
S-Video (PAL, NTSC & SECAM)
Composite Video (PAL, NTSC & SECAM)
Network Connection
IR handset with wired option via 3.5mm jack (with loop through)
LAN via RJ45 with full feature set via protocol
Duplication of OSD served from projector controller via RJ45
RS232 via 9 Pin connector 
Lamp Type
Dual 330W High Intensity Discharge
Lamp Life
 (typical)1
Full Power: 1500 hrs (up to 3000 hrs in lamp sequential mode) 
Eco Mode : 2000 hrs (up to 4000 hrs in lamp sequential mode)
Intelligent Lens Mount
Motorised Focus, Zoom, and Vertical and Horizontal Lens 
Shift
Lens Shift (maximum)
Zoom Lenses: 
Vertical +/- 0.6 frames, Horizontal +/- 0.15 frames
Lens Options
0.77:1 Fixed   
1.16:1 Fixed
1.45-1.74:1 Zoom
1.74-2.17:1 Zoom
2,17-2.90:1 Zoom
2.90-4.34:1 Zoom
4.34-6.76:1 Zoom
Mechanical Mounting
Front or rear table, front or rear ceiling
Optional rigging/stacking frame with integrated pitch, roll 
and yaw adjustments
Weight (chassis only)
27 kg, 59.5 lbs
Video Processing: Advanced Front End processor:
• Advanced geometry correction:
   •Accurate warp map generation by adjustment of an inter-
polated grid array of up to 16 x 16 nodes. Up to eight maps 
can be generated, downloaded and stored on the projector 
Specifications subject to change without notice   DP V1.0 06/2011   ©2011 Digital Projection, Inc.
™DLP, Digital Light Processing and DMD are trademarks of Texas Instru\
ments, Inc.
HIGHlite Dual 660 Series
HIGHlite Cine 1080p-660  •   HIGHlite Cine WUXGA-660
for selection via the OSD or control application
• On board implementation of Pincushion & Barrel, 
Cornerstone, Vertical & Horizontal Keystone, and 
Image Rotation
• High Quality Edge Blending & Multi Projector Tiling:
   •High bit depth processing in blend region to ensure   
  smooth image
    •Adjustable S-Curve Parameter and degamma 
functions
    •Black Level Uplift in non blend area to ensure 
uniformity across 
blend in dark images
    •Correction of black level uplift to compensate for 
non-active pixels at the edge of the DMD
  •The user can choose to assign the projector a 
position within an image matrix. The video processing 
automatically extracts the appropriate segment of the 
input image and enables blending for the appropriate 
edges
• Single Stage Scaling:
  •Resizing and Warp functions are carried out in 
a single stage process, maximizing the clarity of the 
resulting image. When operating Blend in conjunction 
with Warp, the processing will automatically superim-
pose the warped-blend map onto the geometrically 
corrected image
  •The user can switch between different sources and 
input aspect ratios while retaining accuracy of the geo-
metrically corrected output
• PIP/POP/PAP:
  •The user has a choice between inputs for the 
main and sub images (Picture in Picture or PIP).  The 
processing additionally offers the option to display 
two sources, side-by side, scaled to the vertical size 
of the panel Picture and Picture or PAP), or alterna -
tively maintaining their original aspect ratios (Picture 
Opposite Picture or POP).
• ColorMax:
  •Each Projector is accurately calibrated at the 
factory with its native primary colors and white point 
being stored in the on board memory. The ColorMax 
processor applies this data to achieve a number of 
stored targets, applicable to filmic, graphic and video 
/ HD imagery. Additionally the data is used to enable 
tracking of the Black Body curve for a wide range of 
color temperatures. The user may choose to use the 
external control application to download their own 
measured color space, as specific to the operating 
environment, and also their preferred target color 
space for primary and secondary colors. Not only is 
this the most flexible color management technology 
available, but it also enables accurate matching of pro-
jectors in tiled or blended applications. In addition to 
the ColorMax calibration of the projector and RGB trim 
is available to allow for front end correction of imbal-
anced sources of analog distribution systems
•De-interlacing, Video enhancement and Frame Delay:
  •The projector automatically detects interlaced 
video and implements 3:2 or 2:2 extraction as appro-
priate, with pixel based, motion adaptive interpolation 
and auto cadence correction. The input sync is gener-
ally phase locked to the displayed frame rate. MPEG 
noise reduction and sharpening techniques are avail-
able to improve image quality from lower bandwidth 
sources.  For applications that require the lowest 
latency possible, the user can elect to switch off many 
of these functions to achieve minimal frame delay. 
INPUT CAPABILITIES
Digital Projection International’s HIGHlite 1080p 660 and 
HIGHlite WUXGA 660  make 3-chip DLP performance available 
in a compact, cost effective chassis that produces dazzlingly 
bright, saturated images and powerful video processing. 
Digital Projection International, Texas Instruments’ first DLP 
partner and the original innovator of the 3-chip DLP projector, 
has developed this new, compact platform, with built in Blend 
and Warp capabilities, native 1920 x 1080 (1080p) or 1920 x 
1200 (WUXGA) resolution, bright, sharp optics and a host of 
professional features to suit a wide range of commercial appli-
cations. 
The HIGHlite 660 models are constructed from high quality, 
rugged materials, suited to support widely varying applications 
and environments. Carefully designed air filtration ensures pro-
tection of internal components, while thermal management has 
been engineered to allow the HIGHlite 660’s to respond to rig-
orous projection environments whilst minimizing audible noise. 
The user interface is logical and intuitive, offering advanced 
features for complex applications, while retaining simple set up 
and automation for more straightforward installations. 
Providing a bright, saturated image from a small-form 3-chip 
display, the HIGHlite 660 models represent powerful yet 
remarkably affordable solutions for a variety of applications, 
including:
Rental and Staging 
Boardrooms and Conference centers
Retail and entertainment
Digital media / advertising and hospitality
Training and education
Visualization / simulation environments
Broadcast sets and events
Houses of Worship
3D mapping
Post production and Digital film screening
As is the case with all Digital Projection displays, our careful 
engineering guarantees HIGHlites provide remarkable resolu-
tion, contrast and color saturation for years to come. Equally 
important, Digital Projection’s legacy in providing superior cus-
tomer and technical services assures our experienced support 
staff is always available to address your needs.
PRELIMINARY
1. VGA
2. HDMI
3. DVI-D 
4.  3G HD-SDI (BNC)
5.  Composite (BNC)
6.  S-Video (4 pin Mini DIN)
7.  Component (4 x BNC)
8.  Composite (RCA) 
						

							Native Color TemperatureHDTV Formats Supported Scan Rates Supported
Remote Control
Automation Control
Operating/Storage Temperature
Operating Humidity
Thermal Dissipation  Fan Noise
Power Requirements Power Consumption PARAMETERS
Projectors 
   Part #HIGHlite Cine 1080p 660     110-959B
HIGHlite Cine WUXGA 660     111-898
Accessories     Part #HIGHlite 330 Lamp & Housing* (2 required)    111-100A
HIGHlite Cine Adjustable Ceiling Mount    111-182
Infrared Remote (Replacement)      105-023A
* Includes high-performance replacement air filter(s)
1 Based on 4-6 hour/day operational profile.  Venue and application condit\
ions may 
impact actual lamp life.
  See Digital Projection’s Product Warranty Statement for details on la\
mp warranty.
  Installations requiring horizontal or vertical tilt orientations greater\
 than 15 degrees 
may reduce the actual operational hours of one of the two lamps.
ADVANCED TECHNICAL SPECIFICATIONS
DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD, SUITE 115  KENNESAW, GA. 30144 • T: 770.420.1350 • F: 770.420.1360 • www.digitalprojection.com
DIGITAL PROJECTION, LTD. • GREENSIDE WAY, MIDDLETON  MANCHESTER, UK. M24 1XX • T: +44.161.947.3300 • F: +44.161.684.7674 • www.digitalprojection.co.uk
DIGITAL PROJECTION, CHINA • TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG  DISTRICT  BEIJING, PR CHINA 100101 • T: +86.10.58239771• F: +86 10 58239770
DIGITAL PROJECTION,  ASIA • 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 • T: +65.6284.1138 • F: +65.6284.1238
Projector Dimensions
HIGHlite Dual 660 Series
Projector dimensions (in)
L1 26.2   W1 19.7   H1 8.7
TMCORE TECHNOLOGY
Projector dimensions (mm)
L1 665   W1 500   H1 220
PRELIMINARY
Native Color Temperature: User Selectable from 3200K, to 10000K
Signal formats 480i, 576i 480p, 576p, 720p, 1080i (50, 59.94 and 60Hz) and 1080p (23.98, 24, 25, 29.97 and 30Hz).
The 3GSDI Input supports SD-SDI, HD-SDI and 3G-SDI YCbCr 4:2:2 serial digital component video.  SMPTE 292M, SMPTE 
259M-C and SMPTE 424M compliant.  Accepts 484i, 576i, 720p, 1080i and 1080p Single link formats at 270Mb, 1.485Gb or  2.97Gb rates.
HDMI & DVI Inputs
HDMI 1.3 with or without HDCP, 36 bit video compatible. DVI-D input with or without HDCP.
Addressable IP remote control, wireless and wired with loop through.  On Board keypad. LAN connection via RJ45/RS232 9 pin D Type.
Operating 0-40C.  Storage -10 to +50C 20 to 80% non-condensing 2867BTUTBA
200-265VAC  50/60Hz Single Phase. 840W
1080p & 
WUXGA Lenses  HB Part #  HC Part #
0.77:1  110-808 110-022
1.16:1  110-809 110-023
1.45 - 1.74:1  110-803  110-017
1.74 - 2.17:1  110-804  110-018
2.17 - 2.90:1  110-805  110-019
2.90 - 4.34:1  110-806  110-020
4.34 - 6.76:1  110-807  110-021