Digital Projection Projector HIGHlite Cine 1080p-660-3D Specifications

							Overview
PERFORMANCE SPECIFICATIONS
Brightness (±10%)8,000 ANSI Lumens 
Contrast Ratio (±10%)2000:1 Full White/Black
Display Type1080p: .65” Darkchip DMD
DMD Specification1080p: 1920 x 1080 pixels native, +/-12 deg tilt angleFast transit Pixels for smooth greyscale and improved contrast.
Fill Factor84%
Sealed Optics at DMD™ InterfaceProtects DMD’s™ from optical contamination
Source Compatibility3GSDI including 1080p 60fps, 24p (4:4:4 and 4:2:2) and 1080iHDMI including deep color processingGraphics standards up to 1920 x 1200 resolution at 60fps via DVI or VGAComponent video (SD and HD) via YPr Pb, RGB, or RGBSS-Video (PAL, NTSC & SECAM)Composite Video (PAL, NTSC & SECAM)
Network ConnectionIR handset with wired option via 3.5mm jack (with loop through)LAN via RJ45 with full feature set via protocolDuplication of OSD served from projector controller via RJ45RS232 via 9 Pin connector 
Lamp TypeDual 330W High Intensity Discharge
Lamp Life (typical)1
Full Power: 1500 hrs (up to 3000 hrs in lamp sequential mode) Eco Mode : 2000 hrs (up to 4000 hrs in lamp sequential mode)
Lens Shift (maximum)120% vertical, 30% horizontal
Lens Options0.77:1 Fixed   1.16:1 Fixed1.45-1.74:1 Zoom1.74-2.17:1 Zoom2,17-2.90:1 Zoom2.90-4.34:1 Zoom4.34-6.76:1 Zoom
Mechanical MountingFront or rear table, front or rear ceilingOptional rigging/stacking frame with integrated pitch, roll and yaw adjustments
Weight (chassis only)33 kg, 72.8 lbs
Video Processing: Advanced Front End processor:• ColorMax: - Each Projector is accurately calibrated at the factory with its native primary colors and white point being stored in the on board memory. The ColorMax processor applies this data to achieve a number of stored targets, applicable to filmic, graphic and video / HD imagery. Additionally the data is used to enable tracking of the Black Body curve for a wide range of color temperatures. The user may choose to use the external control application to download their own measured color space, as specific to the operating environ-ment, and also their preferred target color space for primary 
Specifications subject to change without notice   DP 1/13   ©2013 Digital Projection, Inc.™DLP, Digital Light Processing and DMD are trademarks of Texas Instru\
ments, Inc.
HIGHlite Cine 1080p 660 3D
HIGHlite Cine 1080p-660-3D
and secondary colors. Not only is this the most flex-ible color management technology available, but it also enables accurate matching of projectors in tiled or blended applications. In addition to the ColorMax calibration of the projector, RGB trim is available to allow for front end correction of imbalanced sources of analog distribution systems.
•De-interlacing, Video enhancement and Frame Delay: - The projector automatically detects interlaced video and implements 3:2 or 2:2 extraction as appro-priate, with pixel based, motion adaptive interpolation and auto cadence correction. The input sync is gener-ally phase locked to the displayed frame rate. MPEG noise reduction and sharpening techniques are avail-able to improve image quality from lower bandwidth sources.  For applications that require the lowest latency possible, the user can elect to switch off many of these functions to achieve minimal frame delay. 
HIGHlite 660 displays also contain the following capabilities for specialized applications:• Advanced geometry correction:   - Accurate warp map generation by adjustment of an interpolated grid array of up to 16 x 16 nodes. Up to eight maps can be generated, downloaded and stored on the projector for selection via the OSD or control application• On board implementation of Pincushion & Barrel, Cornerstone, Vertical & Horizontal Keystone, and Image Rotation• High Quality Edge Blending & Multi Projector Tiling:   - High bit depth processing in blend region to ensure    smooth image   - Adjustable S-Curve Parameter and degamma functions   - Black Level Uplift in non blend area to ensure uni-formity across blend in dark images   - Correction of black level uplift to compensate for non-active pixels at the edge of the DMD   - The user can choose to assign the projector a position within an image matrix. The video processing automatically extracts the appropriate segment of the input image and enables blending for the appropriate edges• Single Stage Scaling:   - Resizing and Warp functions are carried out in a single stage process, maximizing the clarity of the resulting image. When operating Blend in conjunction with Warp, the processing will automatically superim-pose the warped-blend map onto the geometrically corrected image   - The user can switch between different sources and input aspect ratios while retaining accuracy of the geo-metrically corrected output• PIP/POP/PAP:   - The user has a choice between inputs for the main and sub images (Picture in Picture or PIP).  The processing additionally offers the option to display two sources, side-by side, scaled to the vertical size of the panel Picture and Picture or PAP), or alterna-tively maintaining their original aspect ratios (Picture Opposite Picture or POP).
Digital Projection, Texas Instruments’ first DLP partner and the orig\
i-
nal innovator of the 3-chip DLP projector, has developed this new, 
compact platform, with built in Blend and Warp capabilities, native 
1920 x 1080 (1080p) or 1920 x 1200 (WUXGA) resolution, bright, 
sharp optics and a host of professional features to suit a wide range 
of entertainment and commercial applications.
The HIGHlite 1080p 660-3D projector is constructed from high 
quality, rugged materials, suited to support widely varying environ-
ments. Carefully designed air filtration ensures protection of internal 
components, while thermal management has been engineered to 
allow the HIGHlite 660’s to respond to rigorous projection applica-
tions while minimizing audible noise.
The high lumen output and rich contrast allow HIGHlite 660-3D 
projectors to thrive on screens 12’ wide and beyond, as well as in 
outdoor spaces, media rooms and other unconventional locations. 
The sleek and quiet chassis, 1080p and WUXGA resolution,
integrated electronics and straightforward user interface make the 
HIGHlite 660-3D displays viable solutions for installations where 
simplicity, low entry cost and imaging quality are paramount.
For venues using curved screens, HIGHlite 660-3D models provide 
the user with advanced Warp and Blend capabilities, including the 
ability to make extensive geometric warp correction for screens with 
complex geometry.
Providing a bright, saturated image from a small-form 3-chip dis-
play, the HIGHlite 660-3D models represent powerful yet remark-
ably affordable solutions for a variety of applications,
including:
Rental and Staging
Large-screen home entertainment
Boardrooms and Conference centers
Retail and entertainment
Digital media / advertising and hospitality
Training and education
Visualization / simulation environments
Broadcast sets and events
Houses of Worship
3D mapping
Post production and Digital film screening
As is the case with all Digital Projection displays, our careful engi-
neering guarantees HIGHlite displays provide remarkable resolu-
tion, contrast and color saturation for years to come. Equally impor-
tant, Digital Projection’s legacy in providing superior customer and 
technical services assures our experienced support staff is always 
available to address your needs.
INPUT / OUTPUT CAPABILITIES
Input*DVI-D / DVI-AHDMI 1.33G-SDIHDBaseTVGA / Analog RGBComponent VideoS-VideoComposite VideoComposite VideoDual PipeHDMI 1.4
ConnectorDVI-IHDMIBNCRJ4515-pin D-Sub4 x BNC4-pin Mini DINRCABNCDVI-IHDMI
   Quantity11111111112
HIGHlite
1080p 660 3D
PRELIMINARY 
						

							Native Color Temperature
HDTV Formats Supported
Scan Rates Supported
Remote Control
Automation Control
Operating/Storage Temperature
Operating Humidity
Thermal Dissipation 
Fan Noise
Power Requirements
Power Consumption
PARAMETERS
Projectors    Part #HIGHlite Cine 1080p-660 3D     113-136
Accessories     Part #HIGHlite 330 Lamp & Housing* (2 required)    111-100HIGHlite Cine Adjustable Ceiling Mount   111-182Infrared Remote (Replacement)     105-023* Includes high-performance replacement air filter(s)
1 Based on 4-6 hour/day operational profile.  Venue and application condit\
ions may impact actual lamp life. See Digital Projection’s Product Warranty Statement for details on la\
mp warranty. Installations requiring horizontal or vertical tilt orientations greater\
 than 15 degrees may reduce the actual operational hours of one of the two lamps.
ADVANCED TECHNICAL SPECIFICATIONS
DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD, SUITE 115  KENNESAW, GA. 30144 • T: 770.420.1350 • F: 770.420.1360 • www.digitalprojection.comDIGITAL PROJECTION, LTD. • GREENSIDE WAY, MIDDLETON  MANCHESTER, UK. M24 1XX • T: +44.161.947.3300 • F: +44.161.684.7674 • www.digitalprojection.co.ukDIGITAL PROJECTION, CHINA • TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG  DISTRICT  BEIJING, PR CHINA 100101 • T: +86.10.58239771• F: +86 10 58239770DIGITAL PROJECTION,  ASIA • 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 • T: +65.6284.1138 • F: +65.6284.1238
Projector Dimensions
Projector dimensions (in)L1 26.2   W1 19.7   H1 8.65
TMCORE TECHNOLOGY
Projector dimensions (mm)L1 665.4   W1 500   H1 219.6
Native Color Temperature: User Selectable from 3200K, to 10000K
Signal formats 480i, 576i 480p, 576p, 720p, 1080i (50, 59.94 and 60Hz) and 1080p (23.98, 24, 25, 29.97 and 30Hz).
The 3GSDI Input supports SD-SDI, HD-SDI and 3G-SDI YCbCr 4:2:2 serial digital component video.  SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.  Accepts 484i, 576i, 720p, 1080i and 1080p Single link formats at 270Mb, 1.485Gb or 2.97Gb rates.
HDMI & DVI Inputs:HDMI 1.3 with or without HDCP, 36 bit video compatible. DVI-D input with or without HDCP.
Addressable IP remote control, wireless and wired with loop through.  On Board keypad.
LAN connection via RJ45/RS232 9 pin D Type.
Operating 0-40C.  Storage -20 to +60C
20 to 90% non-condensing
2866 BTU
39 dBA
90-240 VAC
840W
1080p & WUXGA Lenses  HB Part #  HC Part #0.77:1 110-808 110-0221.16:1 110-809 110-0231.45 - 1.74:1 110-803  110-0171.74 - 2.17:1 110-804  110-0182.17 - 2.90:1 110-805  110-0192.90 - 4.34:1 110-806  110-0204.34 - 6.76:1 110-807  110-021
HIGHlite Cine 660 - FRONT
HIGHlite Cine 660 - SIDE
HIGHlite Cine 660 - TOP
500
HIGHlite
1080p 660 3D
PRELIMINARY
HIGHlite Cine 1080p 660 3D