Digital Projection Projector HIGHlite 740 Series User Manual

page 82
Reference Guide
CHOOSING A LENS
Basic calculation example
1. Calculate the throw ratio using the formula.
Your screen is 4.5 m wide and you wish to place the projector 
approximately 11  m from the screen. The throw ratio will then be
  
11
4.5 = 2.44
2. Match the result with the lens table.
The lens matching a throw ratio of 2.44 is the 2.17 - 2.90 : 1 
zoom lens.
3. Check whether the lens covers the required throw distance. 
The range quoted for the 2.17 - 2.90 : 1 zoom lens is  2.7 - 15.4 
m....

page 83
Reference Guide
CHOOSING A LENS
Full lens calculation
Introducing TRC
The choice of lens will affect the image size and will address discrepancies between the 
DMD™ resolution and the source.
When an image fills the height of the DMD™ but not the width, it uses less than 100% of 
the DMD™ surface. A lens chosen using the basic formula may produce an image that is 
considerably smaller than the actual screen.
To compensate for loss of screen space in such situations, you need to in\
crease the...

page 84
Reference Guide
CHOOSING A LENS
Calculating TRC
To calculate TRC, use the following formula:
DMD™ aspect ratioSource aspect ratio
TRC =
TRC table
Alternatively, you can save time by referencing the following table, which shows the \
TRC value for some popular image formats:
1080pWUXGA
2.35:1 (Scope), 1920 x 817 pixelsTRC < 1, not usedTRC < 1, not used
1.85:1 (Flat), 1920 x 1037 pixelsTRC < 1, not usedTRC < 1, not used
1.78:1 (16:9), 1920 x 1080TRC = 1, not used (native resolution)TRC < 1, not...

page 85
Reference Guide
CHOOSING A LENS
Calculating the throw ratio with TRC
1. For TRC > 1, amend the basic throw ratio formula as follows:
Throw distance
Screen width  x TRC
Throw ratio =
2. Once a throw ratio is established, identify the matching lens from the t\
able:
Throw ratiosThrow distance range
0.77 : 1 fixed lens1.3 - 2.5 m (4.3 - 8.2 ft)
1.16 : 1 fixed lens1.4 - 6.2 m (4.6 - 20.3 ft)
1.45 - 1.74 : 1 zoom lens1.8 - 9.3 m (5.9 - 30.5 ft)
1.74 - 2.17 : 1 zoom lens2.2 - 11.8 m (7.2 - 38.7 ft)...

page 86
Reference Guide
CHOOSING A LENS
Full lens calculation example
Your screen is 4.5 m wide; you wish to place the projector 
approximately 11  m from the screen. You use a WUXGA 
projector; the source is 4:3.
1. Calculate TRC as follows:
1.6
1.33
TRC = = 1.2
2. Calculate the throw ratio:
11
4.5 x 1.2
Throw ratio = = 2.04
3. Find a match in the lens table.
The table shows that the matching lens is the 1.74 - 2.17 : 1 
zoom lens.
4. Check whether the lens covers the required throw distance.
The range...

page 87
Reference Guide
SCREEN REQUIREMENTS
Screen Requirements
Fitting the image to the DMD™
If the source image supplied to the projector is smaller than the DMD™ resolution, the image will not fill the DMD™. The following examples 
show how a number of common formats may be displayed, depending on your \
DMD™ resolution.
1080p images displayed full width
Notes
2.35:1(Scope) 
 =  817 pixels
full width = 1920 pixels
1.85:1 
 = 1037 pixels
16:9 = 1.78:1  
= 1080 pixels 
(native resolution)
   
Digital...

page 88
Reference Guide
SCREEN REQUIREMENTS
1080p images displayed full heightNotes
4:3 = 1.33:1 = 1440 pixels
full height = 1080 pixels
1.66:1 (Vista) = 1792 pixels16:9 = 1.78:1 = 1920 pixels  
(native resolution)
16:10 = 1.6:1 = 1728 pixels
   
Digital Projection HIGHlite 740 Series 
Rev I Februar y 2015  

page 89
Reference Guide
SCREEN REQUIREMENTS
WUXGA images displayed full width
WUXGA images displayed with a height of  1080 pixels
full width = 1920 pixels
2.35:1(Scope)  =  817 pixels
1.85:1 
 = 1037 pixels
16:9 = 1.78:1  
= 1080 pixelsfull height  
= 1200 pixels
Notes
4:3 = 1.33:1 = 1440 pixels
full height  
= 1200 pixels
1.66:1 (Vista) = 1792 pixels 16:10 = 1.6:1 = 1728 pixels
max possible  image height 
 
= 1080 pixels
full width = 1920 pixels
   
Digital Projection HIGHlite 740 Series 
Rev I Februar...

page 90
Reference Guide
SCREEN REQUIREMENTS
WUXGA images displayed full heightNotes
 Only WUXGA or UXGA images 
can fill the full height of the DMD ™, 
using all 1200 pixels without scaling.
 full height = 1200 pixels
WUXGA = 16:10 = 1.6:1 = 1920 pixels UXGA = 4:3 = 1.33:1 = 1600 pixels
   
Digital Projection HIGHlite 740 Series 
Rev I Februar y 2015  

page 91
Reference Guide
SCREEN REQUIREMENTS
Diagonal screen sizes
Screen sizes are sometimes specified by their diagonal size (D). When dealing 
with large screens and projection distances at different aspect ratios, it is more 
convenient to measure screen width (W) and height (H).
The example calculations below show how to convert diagonal sizes into w\
idth and 
height, at various aspect ratios.   
2.35:1 (Scope) 
W = D x 0.92 H = D x 0.39
1.85:1 
W = D x 0.88 H = D x 0.47
16:9 = 1.78:1 (native aspect...