Digital Projection Projector HIGHlite 740 1080p Specifications

							Specification Sheet
HIGHlite 740 1080p
10,000 ANSI Lumens | Contrast Ratio: 2,000:1 | Part No:113-901
Colour System: DMD Specification:
3-chip DLP®
Display Type:
3 x 0.65 DarkChip™ DMD™ 1920 x 1080 pixels native.
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
16x9
Fill Factor
87%
Key Features
Video & Graphics Processing
High Bandwidth Digital & Analogue Receiver with 10 Bit A-D.
The projector automatically detects interlaced video and implements 3:2 or 2:2 extraction as appropriate, with 
pixel based, motion adaptive interpolation and auto cadence correction.
Displayed image frame locked to input with as low as 1 frame total latency.
24p and 1080p native display.
Image enhancement for MPEG, Mosquito noise & Colour Transients in composite sources.
Geometry Correction
Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
Non-Linear Warp adjustment by moving points on an interpolated grid.
Edge Blending 
Semi-automated Multi Projector Tiling
Correction for non-active pixels at the edge of the display.
Super Image Clarity
Geometry correction and Edge Blending implemented in single stage process, retaining maximum image 
resolution.
Picture in Picture
Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios 
maintained.
ColorMax™
Accurate matching of projectors in tiled or blended applications.
User Selection and storage of Primary and Secondary colour targets.
Projector Controller Software 
						

							Intuitive user interface for network control
Simultaneous control of user-defined groups of projectors
At-a-glance monitoring of projector status
Source Compatibility:
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI and DVI include Deep Color™ processing up to 36 bit.
DVI inputs are HDMI compatible. 
Digital Audio Extraction via SPDIF for HDMI sources.
Graphics standards up to 1920 x 1200 at 60Hz via DVI or VGA.
Component Video (SD & HD) via YPrPb, RGB or RGBS.
S-Video (PAL, NTSC & SECAM)
Composite Video (PAL, NTSC & SECAM)
Inputs/Outputs  
 Video & Computer
Type Connector Qty
DVI-D / DVI-A
HDMI 1.3
3G-SDI
VGA / Analog RGB
Component Video
S-Video
Composite Video
Composite Video
Audio
SPDIF Digital Output DVI-I
HDMI
BNC
15-pin D-Sub
4 x BNC
4-pin Mini DIN
RCA
BNC
RCA 1
1
1
1
1
1
1
1
1  Communication & Control
Type Connector Qty
LAN
RS232
Wired Remote In
Wired Remote Out
Service Port RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type B 1
1
1
1
1
3D Formats Supported HDTV Formats Supported
Not applicable 1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 
59.94Hz, 60Hz), 1080i (50Hz, 59.94Hz, 60Hz), 1080sf 
(23.98Hz, 24Hz), 720p (50Hz, 59.94Hz, 60Hz)
Computer Compatibility Bandwidth
Up to 1920 x 1200 170 MHz on analog RGB
165 Megapixels per second on HDMI and DVI
Remote Control Automation Control
Addressable IR remote control, wireless and wired with 
loop-through. 
On-Board keypad RS232
LAN
Colour Temperature  
User selectable from 3200 to 9000K  
Lamp Type Typical Lamp Life
2 x 370W High Intensity Discharge Full Power: 1500 hours (up to 3000 hours in lamp 
sequential mode)
Eco Mode : 2000 hours (up to 4000 hours in lamp 
sequential mode)
Lenses
Lens Part No. Focus Range Lens Shift
0.77 : 1 fixed HB
1.16 : 1 fixed HB
1.45 - 1.74 : 1 zoom HB
1.74 - 2.17 : 1 zoom HB
2.17 - 2.90 : 1 zoom HB
2.90 - 4.34 : 1 zoom HB
4.34 - 6.76 : 1 zoom HB 110-808 
110-809 
110-803 
112-878 
113-852 
110-806
110-807 1.3m - 2.5m
1.4m - 6.2m
1.8m - 9.3m
2.2m - 11.8m
2.7m - 15.4m
3.6m - 22.5m
5.5m - 35m Vert: 0.2 (U) 0.2 (D) frame, Hor: 0.05 (L) 0.05 (R) frame
Vert: 0.2 (U) 0.2 (D) frame, Hor: 0.05 (L) 0.05 (R) frame
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
Lens Mount
Motorised shift, zoom and focus.
Mechanical Mounting Orientation 
						

							Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Optional RapidRig™ frame with integrated pitch, roll and 
yaw adjustments. Table Top or Inverted:  Yes 
Pointing Up:         Yes 
Pointing Down:    Yes 
Roll (Portrait):      Yes
Power Requirements Power Consumption
90 - 240VAC 50/60Hz single phase 950W
Thermal Dissipation Fan Noise
3241 BTU/Hour 39dBA
Operating/Storage Temperature Operating Humidity 
Operating: 0 to 40C (32 to 104F)
Storage: -20 to 60C (-4 to 140F) 20% to 90% non-condensing
Weight (Chassis Only) Dimensions
 27 kg 
60 lb  L: 66.5 cm W: 50 cm H: 22 cm
L: 26.2 in W: 19.7 in H: 8.7 in
Safety & EMC Regulations
CE, FCC Class A & B, UL, CCC, KC  
*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this 
display for more accurate information.
Downloads  
PDF CAD Drawings
AUTOCAD Drawings User Guides
Important Information
Specifications subject to change without notice. Digital Projection version: 1.1 - 14-Aug-13 ©2012 Digital Projection.
DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc
DIGITAL PROJECTION, INC  55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144
T: 770.420.1350 | F: 770.420.1360 |  www.digitalprojection.com
DIGITAL PROJECTION, LTD  GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX 
T: +44.161.947.3300 | F: +44.161.684.7674 |  www.digitalprojection.co.uk
DIGITAL PROJECTION, CHINA  TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG DISTRICT BEIJING, 
PR CHINA 100101 
T: +86.10.58239771 | F: +86 10 58239770
DIGITAL PROJECTION, ASIA  16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204
T: +65.6284.1138 | F: +65.6284.1238