Home
>
Digital Projection
>
Projector
>
Digital Projection Projector HC M Vision Cine 400 User Manual
Digital Projection Projector HC M Vision Cine 400 User Manual
Have a look at the manual Digital Projection Projector HC M Vision Cine 400 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 86
Page 6.14 Rev A December 2010
6. Appendix Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual
Remote communications protocol
Introduction
The projector can be controlled by using an external control system or a\
PC via an
RS232 serial interface, using a terminal-emulation program, such as Hype\
rTerminal.
There are 2 types of commands:
Key commands
Operation commands
All commands consist of ascii text strings starting with 2 letters:
ky for key commands.
op for operations commands....](http://img.usermanuals.tech/thumb/5761/99115/w64_projector_manual_5971_d-85.png "Page 86
Page 6.14 Rev A December 2010
6. Appendix Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual
Remote communications protocol
Introduction
The projector can be controlled by using an external control system or a\
PC via an
RS232 serial interface, using a terminal-emulation program, such as Hype\
rTerminal.
There are 2 types of commands:
Key commands
Operation commands
All commands consist of ascii text strings starting with 2 letters:
ky for key commands.
op for operations commands....")
![Page 88
Page 6.16 Rev A December 2010
6. Appendix Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual
Operation Commands
Operation commands are used to simulate menu operations and determine th\
e
settings of the projector, and use the following format:
op [CR]
The string can take one of the following formats:
Description
Set= Makes the setting take that value.
Get?Asks what the current value is.
The value is returned as an ascii text string.
Increment+Adds 1 to the current value....](http://img.usermanuals.tech/thumb/5761/99115/w64_projector_manual_5971_d-87.png "Page 88
Page 6.16 Rev A December 2010
6. Appendix Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual
Operation Commands
Operation commands are used to simulate menu operations and determine th\
e
settings of the projector, and use the following format:
op [CR]
The string can take one of the following formats:
Description
Set= Makes the setting take that value.
Get?Asks what the current value is.
The value is returned as an ascii text string.
Increment+Adds 1 to the current value....")
Rev A December 2010 Page 6.19 Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual 6. Appendix OperationValuesNotes pixel.clock?MHz signal? lamp.hours? total.hours? environment?Temperatures fact.reset(execute) blue.only=0 = Off 1 = On pattern=0 = White 1 = Black 2 = Red 3 = Green 4 = Blue 5 = Cyan 6 = Magenta 7 = Yellow 8 = Chequerboard 9 = Greyscale 10 = Alignment Grid 11 = Off altitude= ?0 = Low 1 = High status.check?0 = standby mode 1 = warm up mode 2 = running mode 3 = cooling mode 4 = error
Digital Projection M-Vision Cine 230, Cine 260, Cine 400 User Manual