Home
>
Digital Projection
>
Projector
>
Digital Projection Projector E-Vision 7500 WXGA 3D Specifications
Digital Projection Projector E-Vision 7500 WXGA 3D Specifications
Have a look at the manual Digital Projection Projector E-Vision 7500 WXGA 3D Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Specification Sheet E-Vision 7500 WXGA 3D 7,500 ANSI Lumens | Contrast Ratio: 2,400:1 (Dynamic Black) 1,000:1 native | Part No:114-306 Colour System: DMD Specification: 6 Segment RYGCWB Colour Wheel for maximum brightness. 6 Segment RGBCMY Colour Wheel for optimised colourimetry - user swappable. Display Type: 1 x 0.65 DarkChip™ DMD™ 1280 x 800 pixels native. Fast transit pixels for smooth greyscale and improved contrast. Aspect Ratio: 16x10 Fill Factor 87% Key Features Video & Graphics Processing HDMI 1.4 for Side by Side, Frame Packing & Top Bottom Formats. Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display). BrilliantColor™ for increased system brightness. DynamicBlack™ for improved black levels in dark scenes. High Bandwidth Digital & Analog Receiver with 10 Bit A-D. Independent control of hue, saturation and gain for primary and secondary colours. The projector automatically detects interlaced video and implements 3:2 or 2:2 extraction as appropriate, with pixel based, motion adaptive interpolation and auto cadence correction. 24p display. Geometry Correction Vertical keystone correction. HDBaseT® Interface Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable. Allows projector to be placed up to 100m from source. Source Compatibility: HDMI including Deep Color™ processing and 3D standards. Graphics standards up to 1920 x 1200 resolution at 60Hz via DVI, HDMI, DisplayPort or VGA. DVI single link with HDCP compliance. Component Video (SD and HD) via YPrPb, RGBHV, RGB or RGBS.
Inputs/Outputs Video & Computer Type Connector Qty HDMI 1.4 DVI-D - Single Link DVI DisplayPort 1.2 HDBaseT VGA / Analog RGB In VGA / Analog RGB Out Component Video HDMI DVI DisplayPort RJ45 15-pin D-Sub 15-pin D-Sub 5 x BNC 1 1 1 1 1 1 1 Communication & Control Type Connector Qty 3D Sync Out LAN RS232 Wired Remote 12V Trigger Service Port VESA 3-pin RJ45 9-pin D Sub 3.5mm Stereo Jack 3.5mm Stereo Jack USB Type A 1 1 1 1 1 1 3D Formats Supported HDTV Formats Supported Frame Packing Side By Side (half) Top and Bottom Frame Sequential 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz) Computer Compatibility Bandwidth Up to 1920 x 1200 165 MHz on analog RGB 165 Megapixels per second on HDMI and DVI Remote Control Automation Control Addressable IR remote control, wireless and wired. On-Board keypad RS232 LAN Colour Temperature User selectable from 5000 to 9300K Lamp Type Typical Lamp Life 2 x 350W High Intensity Discharge Full Power: 2000 hours (up to 4000 hours in lamp sequential mode) Eco Mode : 2500 hours (up to 5000 hours in lamp sequential mode) Lenses Lens Part No. Focus Range Lens Shift 0.8 :1 fixed 0.78 - 0.99 :1 zoom 1.31 - 1.88 :1 zoom 1.8 - 2.38 :1 zoom 2.32 - 3.89 :1 zoom 3.74 - 5.67 :1 zoom 5.53 - 8.74 :1 zoom 112-499 115-339 112-500 112-501 112-502 112-503 112-504 0.81m - 5.08m 1.02m - 12.7m 1.33m - 11.73m 1.83m - 14.9m 2.36m - 24.2m 3.8m - 35.35m 5.59m - 54.8m none Vert: 0.5 (U) 0 (D) frame, Hor: 0.1(L) 0.1 (R) frame Vert: 0.5 (U) 0 (D) frame, Hor: 0.1(L) 0.1 (R) frame Vert: 0.5 (U) 0 (D) frame, Hor: 0.1(L) 0.1 (R) frame Vert: 0.5 (U) 0 (D) frame, Hor: 0.1(L) 0.1 (R) frame Vert: 0.5 (U) 0 (D) frame, Hor: 0.1(L) 0.1 (R) frame Vert: 0.5 (U) 0 (D) frame, Hor: 0.1(L) 0.1 (R) frame Lens Mount Motorised and programmable shift, zoom and focus. Intelligent Lens Memory with 10 user-definable preset positions. Mechanical Mounting Orientation Front/Rear Table Front/Rear Ceiling Adjustable Front/Rear Feet Table Top or Inverted: Yes Pointing Up: Yes Pointing Down: Yes Roll (Portrait): +/-10° from horizontal Power Requirements Power Consumption 100-240VAC 50/60Hz single phase 880 W Thermal Dissipation Fan Noise 3003 BTU/Hour 41 dBA, Eco 36 dBA Operating/Storage Temperature Operating Humidity Operating: 0 to 40C (32 to 104F) Storage: -5 to 45C (23 to 113F) 10 to 95% non-condensing Weight (Chassis Only) Dimensions 20 kg 44.1 lb L: 52.0 cm W: 50.4 cm H: 19.7 cm L: 20.5 in W:19.8 in H: 7.8 in
Safety & EMC Regulations CE, FCC Class B, UL, CCC *Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information. Downloads PDF CAD Drawings AUTOCAD Drawings User Guides Important Information Specifications subject to change without notice. Digital Projection version: 1.2 - 20-Jun-13 ©2012 Digital Projection. DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc DIGITAL PROJECTION, INC 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144 T: 770.420.1350 | F: 770.420.1360 | www.digitalprojection.com DIGITAL PROJECTION, LTD GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX T: +44.161.947.3300 | F: +44.161.684.7674 | www.digitalprojection.co.uk DIGITAL PROJECTION, CHINA TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG DISTRICT BEIJING, PR CHINA 100101 T: +86.10.58239771 | F: +86 10 58239770 DIGITAL PROJECTION, ASIA 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 T: +65.6284.1138 | F: +65.6284.1238