Home > Digital Projection > Projector > Digital Projection Projector E-Vision 4500 1080p 3D Specifications

Digital Projection Projector E-Vision 4500 1080p 3D Specifications

    Download as PDF Print this page Share this page

    Have a look at the manual Digital Projection Projector E-Vision 4500 1080p 3D Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Specification Sheet
    E-Vision 4500 1080p 3D
    4,000 ANSI Lumens | Contrast Ratio: 2,000:1 | Part No:115-131
    Colour System: DMD Specification:
    5-segment RYGWB Color Wheel
    Display Type:
    1 x 0.65 DarkChip™ DMD™ 1920 x 1080 pixels native.
    Fast transit pixels for smooth greyscale and improved contrast.
    Aspect Ratio:
    16x9
    Fill Factor
    87%
    Key Features
    Video & Graphics Processing
    HDMI 1.4 for Side by Side, Frame Packing & Top Bottom Formats.
    Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
    Synchronisation of active glasses, DLP® Link™ glasses or polarising switcher.
    BrilliantColor™ for increased system brightness.
    Independent control of hue, saturation and gain for primary and secondary colors.
    High Bandwidth Digital & Analog Receiver with 10 Bit A-D.
    The projector automatically detects interlaced video and implements 3:2 or 2:2 extraction as appropriate, with 
    pixel based, motion adaptive interpolation and auto cadence correction.
    24p and 1080p native display.
    Geometry Correction
    Vertical keystone correction.
    Source Compatibility:
    HDMI including Deep Color™ processing and 3D standards.
    DVI with HDCP compliance.
    Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI, DVI, DisplayPort or VGA.
    Component Video (SD and HD) via YPrPb, RGBHV, RGB or RGBS.
    S-Video (PAL, NTSC & SECAM)
    Composite Video (PAL, NTSC & SECAM) 
    						
    							Inputs/Outputs  
     Video & Computer
    Type Connector Qty
    HDMI 1.4
    DVI-D
    DisplayPort
    VGA / Analog RGB In
    VGA / Analog RGB Out
    Component Video
    Component Video
    S-Video
    Composite Video
    Audio
    VGA Audio In
    VGA Audio Out
    Component Audio Out
    S-Video/Composite Audio In HDMI
    DVI
    DisplayPort
    15-pin D-Sub
    15-pin D-Sub
    5 x BNC
    3 x RCA
    4-pin Mini DIN
    RCA
    3.5mm Mini Jack
    3.5mm Mini Jack
    2 x RCA Phono
    2 x RCA Phono 1
    1
    1
    2
    1
    1
    1
    1
    1
    2
    1
    1
    1  Communication & Control
    Type Connector Qty
    LAN
    RS232
    Wired Remote
    12V Trigger
    Service Port
    1.5A USB charge
    3D Sync Out RJ45
    9-pin D Sub
    3.5mm Stereo Jack
    3.5mm Stereo Jack
    USB Type B
    USB Type A
    VESA 3-pin 1
    1
    1
    1
    1
    1
    1
    3D Formats Supported HDTV Formats Supported
    Frame Sequential
    Top and Bottom 
    Side By Side (half) 
    Frame Packing 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 
    60Hz), 720p (50, 60Hz)
    Computer Compatibility Bandwidth
    Up to 1920 x 1200 165 MHz on analog RGB
    165 Megapixels per second on HDMI and DVI
    Remote Control Automation Control
    IR remote control, wireless and wired.
    On-Board keypad RS232
    LAN
    Colour Temperature  
    User selectable  
    Lamp Type Typical Lamp Life
    370W High Intensity Discharge Full Power: 1500 hours
    Eco Mode : 2000 hours
    Lenses
    Lens Part No. Focus Range Lens Shift
    0.77: 1 fixed
    1.54 - 1.93: 1 zoom
    1.93 - 2.91: 1 zoom 114-785
    114-783 
    114-784 0.4m - 3.1m
    0.95m - 11.9m
    1.2m - 29.8m Vert: 0.55 (U) 0.15 (D) frame, Hor: 0.05 (L) 0.05 (R) frame
    Vert: 0.55 (U) 0.15 (D) frame, Hor: 0.05 (L) 0.05 (R) frame
    Vert: 0.55 (U) 0.15 (D) frame, Hor: 0.05 (L) 0.05 (R) frame
    Lens Mount
    Manual shift, zoom & focus.
    Mechanical Mounting Orientation
    Front/Rear Table
    Front/Rear Ceiling
    Adjustable Front/Rear Feet Table Top or Inverted:  Yes 
    Pointing Up:         Yes 
    Pointing Down:    Yes 
    Roll (Portrait):      +/-10° from horizontal
    Power Requirements Power Consumption
    100-240VAC 50/60Hz single phase 450W
    Thermal Dissipation Fan Noise
    1415 BTU/Hour 42 dBA, Eco 37 dBA
    Operating/Storage Temperature Operating Humidity 
    Operating: 5 to 35C (41 to 95F)
    Storage: -10 to 60C (14 to 140F) 10 to 85% non-condensing
    Weight (Chassis Only) Dimensions 
    						
    							 8.6 kg 
    19 lb  L: 34.4 cm W: 43.1 cm H: 18.1 cm
    L: 13.55 in W: 16.97 in H: 7.13 in
    Safety & EMC Regulations
    FCC Class B, cUL, UL, CE, C-tick, CCC, KC, CB, PCT  
    *Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this 
    display for more accurate information.
    Downloads  
    PDF CAD Drawings
    AUTOCAD Drawings User Guides
    Important Information
    Specifications subject to change without notice. Digital Projection version: 1.1 - 29-Nov-12 ©2012 Digital Projection.
    DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc
    DIGITAL PROJECTION, INC  55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144
    T: 770.420.1350 | F: 770.420.1360 |  www.digitalprojection.com
    DIGITAL PROJECTION, LTD  GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX 
    T: +44.161.947.3300 | F: +44.161.684.7674 |  www.digitalprojection.co.uk
    DIGITAL PROJECTION, CHINA  TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG DISTRICT BEIJING, 
    PR CHINA 100101 
    T: +86.10.58239771 | F: +86 10 58239770 
    						
    							DIGITAL PROJECTION, ASIA  16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204
    T: +65.6284.1138 | F: +65.6284.1238 
    						
    All Digital Projection manuals Comments (0)

    Related Manuals for Digital Projection Projector E-Vision 4500 1080p 3D Specifications