Digital Projection M-vision Cine1080p Displays Quick Start Guide

							Quick Start Guide 
M-Vision Cine1080p Displays
Atlanta, GA USA  •  Manchester, UK  •  Beijing, China  •  Singapore
 770.420.1365  •  www.digitalprojection.com
Atlanta, GA USA  •  Manchester, UK  •  Beijing, China  •  Singapore
 770.420.1365  •  www.digitalprojection.com
Symbols used in this guide
Warnings
 ELECTRICAL  WARNING: this symbol indicates that there is a danger of  
electrical shock unless the instructions are closely followed .
 WARNING: this symbol indicates that there is a danger of physical  
injury to yourself and/or damage to the equipment unless the 
instructions are closely followed.
 N OTE: this symbol indicates that there is some important information that\
  
you should read. 
						

							Quick Start Guide - (continued)
M-Vision 1080p Displays
Adjusting the Lens Zoom, Focus, Horizontal and Vertical Shift4
Adjust Image and System Settings5
Power Off and Allow to Cool Down6
Quick Start Guide
M-Vision Cine 1080p Displays
Getting Started1
Get to Know the Connector Panel2
Connect Sources, Connect Power, Power On3
This Quick Start Guide has been designed to aid in quickly getting started with your new projector.  If you require further help, or have further questions on how to operate this unit, please refer to our website in order to download full product documen-tation (Home Cinema dealers visit www.digitalprojection.com/mvisionHC -- Commercial dealers visit www.digitalprojection.com/mvisionCAV).  You can also access FAQs and view articles to get to know more specific product features and benefits.
Packaging Contents:
ProjectorRemote       lens shift wrench      cable kit
The connector panel at the back features a wide range of connectors for all sorts of source connections.  Decide which one(s) that meet(s) your requirement(s). 
Make sure the projector is switched off, and not connected to power when connecting to sources.  Connect video and computer sources, then insert the power cable.  Power up sources, including computers and video playback devices.  Power up the projector by pressing the power key.  A steady, bright indicator light will indicate it is in operation.
Adjust zoom to set correct image size, shift to correct position, focus for clarity, and any other desired setting.  Adjust image level with the front feet, and tilt with the rear foot.  For projectors equipped with a zoom lens, adjust zoom to set he correct image size and focus by manually adjusting the zoom and focus trim rings on the lens.  Manually adjust the horizontal and vertical shift by accessing the shift points, located under the Digital Projection logo plate on the top of the projector.  The logo should be gently lifted and rotated to gain access to the adjustment points.
Change and adjust settings such as brightness and contrast, ceiling mount and rear projection display, as well as color calibration and other system settings by using the remote control or through the menu system that is accessible from theon-board keypad.
To power off, press the Power key once, and confir m by pressing again.  Allow to cool down until all fans have stopped (a minimum of 30 seconds), and steady amber indicator lights indicate the projector has been safely turned off.  Disconnect any cables, sources and power cables before uninstalling the projector.
Quick Start Guide
M-Vision Cine 1080p Displays
>30 sec