Digital Projection Lightning 40isx+ 3d, 40isx+ 3d Ultra Contrast Specifications

							Specifications subject to change without notice   DP V1.0 02/09   ©2009 Digital Projection, Inc.™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc.
LIGHTNING 3D Pro Series II
Overview
PERFORMANCE SPECIFICATIONS
Brightness (±10%)40 isx+ 3D:  21,000 ANSI Lumens40 isx+ 3D Ultra Contrast:  8,000 ANSI Lumens
Contrast Ratio (±10%)40 isx+ 3D:  1800:140 isx+ 3D Ultra Contrast:  3500:1
Display Type3 x .95” Dark Chip DMD™ with Fast Transit Pixels for smooth greyscale and improved contrast
DMD Specification1400 x 1050 pixels native, 12˚ tilt angle
Fill Factor90%
Sealed Optics at DMD™ InterfaceProtects DMD’s™ from optical contamination
Source Compatibility•   Composite, s-video, and color difference video    standards • RGB graphics standards up to 1920 x 1080 •  DVI standards with HDCP compliance•  High definition RGB and color difference standards• High definition / standard definition serial  digital formats (SD/HD-SDI)
Video Processing•  Enhanced 7 point color correction•  Dual Flash Processing™ increases 60 Hz inputs    to 120 Hz displayed output• FastFrame™ Motion Blur Reduction•  Class leading Video de-interlacing/processing of    SD and HD sources using auto 3:2 and 2:2  extraction, ruggedized for editing discontinuities•  Pixel-based motion adaptive interpolation•   User selectable preset, parametric   de-gamma and user downloadable de-gamma•  Frame Delay: as low as 1 frame, source  dependant•  Auto mode selection - plug and play setup
High Bandwidth Input• 3D capable • Pixel Mapped - with low latency• FastFrame™ Motion Blur Reduction • 120 Hz with no frame doubling 
Digital  Projection  International  (DPI),  Texas  Instruments’  first  DLP™  partner  and  the original  innovator  of  the  3-chip  DLP™  projector,  proudly  introduces  the LIGHTNING  isx+ 3D family.
Each new LIGHTNING 3D model employs the latest in dark chip, 3-chip DLP™ technology, and  include  DPI’s  exceptional  RapidRig™  staging  and  stacking  hardware  with  integrated pitch,  roll  and  yaw  adjustments.    When  considered  along  with  their  8,000  -  21,000  ANSI lumen brightness and contrast performance up to 3500:1, the LIGHTNING 3D models are the  perfect  imaging  solutions  for  the  most  demanding  large  screen  immersive  applica-tions, including: military simulation, scientific visualization, medical, chemical and geologi-cal research, product engineering, commercial cinema and theme park attractions. 
In addition to the active 3D capability, the LIGHTNING 3D models also include DP’s new FastFrame™ technology, a revolutionary combination of hardware and firmware that vastly reduces  the  artifacts  and  image  blur  typically  associated  with  rapidly  moving  displayed content. The benefits of FastFrame™ are especially important for simulation environments such as commercial and military flight training, and other applications where maintaining the visual integrity of high-speed imagery is vital.
The  LIGHTNING  isx+  3D  projectors  also  incorporate  DPI’s  Hyper-Cooled  lamp  module, one of our CoolTek™ innovations.  Engineered with a proprietary, directional-flow reflector mask and radial heat exchanger, the Hyper-Cooled module dramatically improves projec-tor thermal characteristics and extends reflector life and lumen maintenance.  In turn, these operating benefits provide a significant reduction to the long-term cost of ownership, while also enhancing component reliability.  
Other key benefits of the LIGHTNING isx+ 3D products include:•   High Bandwidth input >120Hz active stereoscopic DVI with no need for frame   doubling.  This capability extends the dynamic range up to 16 bit for improved contrast and color gamut.• Dual Flash Processing™(DFP) – Supports users wishing to distribute 3D content via    more traditional, 60 Hz formats with the option to frame-double their sources within the projector, via DFP.  When this option is selected, the input signal, having been    processed and if necessary re-sized to map to the native resolution of the projector,    will also be frame-doubled to 120 Hz, and the doubled frames interleaved.  This produces imagery with the low flicker characteristics of a native 120 Hz source, but without the infrastructure costs associated with distributing and switching ultra-high bandwidth signals. • Projector electronics which provide an interface to drive an infrared transmitter to    synchronize switching glasses with active displayed frames.  The user can elect either to pass through an external synch pulse, or to use the reference generated    internally by the projector.  Adjustments are provided to accommodate the phase and dead time characteristics of different switching glasses.• FastFrame™ technology, a revolutionary combination of hardware and firmware that provides user adjustments to vastly reduce the artifacts and image blur typically    associated with rapidly moving display content.  • DP’s NextGen electronics with class leading video de-interlacing. SD and HD sources are processed using auto 3:2 and 2:2 extraction.   • Minimal video delay from input to screen - as low as 1 frame, depending on source.•  Eight user-selectable inputs including HDCP compliant DVI, plus SD/HD-SDI as standard. •  High bandwidth DVI inputs offer Single, Twin, Dual & Dual Twin DVI connectivity.•  ColorMax calibration capabilities, including enhanced seven-point color correction for broader color space and accurate color alignment.• DP’s CoolTek™ engineering, which delivers the highest lumen performance with the    lowest thermal (BTU) and noise level (dB) output.
LIGHTNING  isx+  3D  Pro  Series  II  projectors  -  ultra-powerful  display  systems  for  major 3D  events  and  Immersive  large  screen  applications  -  bringing  the  precision  of  Digital Projection to every venue.
LIGHTNING 40isx+ 3D • LIGHTNING 40isx+ 3D Ultra Contrast
3D SyncSync In - External lockSync Out - Shutter glass control
Network ConnectionLAN via RJ 45, Wireless 802.11b,full protocol feature set
Lamp TypeProprietary xenon arc, bubble. Hyper-cooledlamp module with directional-flow reflector mask and radial heat exchanger.  Digital Hour meter.
Lamp Life (typical)140 isx+ and Ultra Contrast: 500 hours 
Lens MountZoom Lenses: Motorized horizontal and vertical lens shift, zoom and focusFixed Lenses: Manual focus
Lens Shift (maximum)Fixed 1.2:1 and Zoom Lenses:    • Vert: +0.5, -0.4 frame; Hor: ±0.2 frame0.73 Fixed lens:     • Vert: ±0.11 frame; Hor: ±0.07 frame
Lens Options0.73  :1 fixed 2.02-2.77  :1 zoom1.2 :1  fixed  2.77-4.51 :1 zoom1.26-1.61 :1 zoom  4.51-7.53 :1 zoom1.5-2.02 :1 zoom  7.5-11.2 :1 zoom
• 1.2:1 Lenses include manual aperture•  
High-contrast lenses available for 0.73:1    and all zoom lenses
Mechanical Mounting•  
Front or rear table;  Front or rear ceiling    (ceiling mount optional)•  
Rugged, staging tolerant chassis with   integrated handles• Optional RapidRig™ frame with integrated   pitch, roll and yaw adjustments
Orientation360˚  front to back±15˚  left to right
Weight (chassis only)249 lbs (113 kg)
INPUT CAPABILITIESTypeCompositeS-VideoComponentInterlaced/Std def Y, Cr/Pr, Cb/Pb, SGraphicsProgressive RGB/Progressive Interlaced Hi def Y, Cr/Pr, Cb/PB RGBHV (Progressive)
Digital RGB   Serial Digital SD/HD-SDI (SMPTE 259M/292M) DVI - High bandwidthDual - mainDual - sub
ConnectorBNC4-pin mini DIN
BNCx4
BNCx5D sub (15-pin)
DVI
BNC
DVIDVI
Quantity11
1
1
1
1
1
11 
						

							Projectors     Part #LIGHTNING 40 isx+ 3D   109-344 LIGHTNING 40 isx+ 3D Ultra Contrast 109-347 
Accessories          Part #LIGHTNING 40 and Ultra Contrast Hypercooled      Lamp & Housing     104-578LIGHTNING 40 and Ultra Contrast Hypercooled      Refurb Lamp & Housing     104-578RLamp Exchange     104-578EInfrared Remote (Replacement)      105-023
1 Based on 4-6 hour/day operational profile.  Venue and application conditions may impact actual lamp life.   See Digital Projection’s Product Warranty Statement for details on lamp warranty.
Lenses   HB Part #0.73:1   105-6071.2:1   105-6081.2:1 (short)    105-6091.26 - 1.61:1   109-2361.5 - 2.02:1   105-6102.02 - 2.77:1   105-6112.77 - 4.51:1   105-6124.51 - 7.53:1   105-6137.5 - 11.2:1   109-235
Native Color Temperature
HDTV Formats Supported
Scan Rates Supported
Remote Control
Automation Control
Operating/Storage Temperature
Operating Humidity
Thermal Dissipation 
Fan Noise
Power Requirements
Power Consumption
PARAMETERS
ADVANCED TECHNICAL SPECIFICATIONS
LIGHTNING 40isx+ 3D Back Panel
LIGHTNING 3D Pro Series II
Projector Dimensions
6000°K ±500°K; white balance-adjustment: 3000°K to 10000°K
1080i (50Hz, 60Hz), 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080 24sf, 720p (50, 60Hz), 480i, 480p
Inputs 1-7: Horizontal: 15kHz to 100kHz / Vertical: 24Hz to 85Hz   -   Input 8: 3D progressive 576p up to 1080p @ 120Hz 
Addressable IR remote control, wireless and wired with loop-through / On board invertable keypad 
 LAN connection via RJ45  / RS232 9-pin D type 
Operating: 0 to 35°C / Storage: -10 to 50°C / 
20 to 80% non-condensing 
15,695 BTU/hour maximum
Less than 59dBA
200-240 VAC ±10%, 50/60Hz single phase 
4600 watts maximum
Projector dimensions (in)L1 40.5   W1 28.5   H1 19.5Projector dimensions (mm)L1 1028   W1 728   H1 495
Projector dimensions (in)L2 43.4   W2 28.1   H2 20.5 Projector dimensions (mm)L2 1116   W2 714   H2 522
   Without FrameWith Frame
DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD, SUITE 115  KENNESAW, GA. 30144 • T: 770.420.1350 • F: 770.420.1360 • www.digitalprojection.comDIGITAL PROJECTION, LTD. • GREENSIDE WAY, MIDDLETON  MANCHESTER, UK. M24 1XX • T: +44.161.947.3300 • F: +44.161.684.7674 • www.digitalprojection.co.ukDIGITAL PROJECTION, CHINA • TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG  DISTRICT  BEIJING, PR CHINA 100101 • T: +86.10.58239771• F: +86 10 58239770DIGITAL PROJECTION,  ASIA • 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 • T: +65.6284.1138 • F: +65.6284.1238
TMCORE TECHNOLOGY