Digital Projection Ivision Sx+ Specifications
Have a look at the manual Digital Projection Ivision Sx+ Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PERFORMANCE SPECIFICATIONS Brightness (±10%) sx+: 2,500 ANSI lumens HD-7: 1,000 ANSI lumens HD-X: 500-1,000 ANSI lumens (user adjustable) Contrast Ratio (full on/full off) sx+: 2000:1 HD-7: 3000:1 HD-X: 4000:1 Display Type sx+: DarkChip2™ DMD HD-7: DarkChip2™ DMD HD-X: DarkChip3™ DMD Sequential Color Management sx+: four segment color wheel HD-7: seven segment color wheel HD-X: seven segment color wheel Native Resolution sx+: 1400 x 1050 pixels HD-7: 1280 x 720 pixels HD-X: 1280 x 720 pixels Computer Compatibility Up to 1600 x 1200 Video Compatibility HDTV, NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, SECAM; HDCP on DVI; Faroudja™ deinterlacing with automatic film mode detection (3:2 and 2:2 pulldown) Aspect Ratio (native) sx+: 4x3 HD-7: 16x9 HD-X: 16x9 Bandwidth (up to) 205 MHz on analog RGB 160 MHz on DVI 75 MHz on component inputThrow Ratio sx+: 1.75-2.2:1 (with standard lens) 1.0:1 (with opt. wide angle lens) HD -7 & 1.75-2.25:1 (with standard lens) HD-X: 1.0:1 (with opt. wide angle lens) 2.5-3.5:1 (with opt. long zoom lens) Throw Distance 1.5-10 meters (5-33f t) Image Size 0.7-5.5 meters (2.5-18f t) wide Image Offset sx+: 8% HD-7 / HD-X: 16% Lamp Type 250W UHP™ Lamp Life (Typical) 12,000 hours -lamp high 4,000 hours -lamp low Mechanical Mounting Front/rear table Front/rear ceiling Adjustable front/rear feet Operating Noise Level 28dB Dimensions (chassis only) 9.6in(L) x 10.9in(W) x 3.5in(H) 244mm(L) x 278mm(W) x 88mm(H) Weight (chassis only) 3kg (6.5lbs) Standard Accessories (sx+ only) Ceiling mount cable cover Cabinet Color sx+ / HD-7:grey - standard white - optional HD-X:Piano black - standard white - optional SX+ • HD-7 • HD-X Digital Projection International proudly offers the iVision series, ultra-quiet, compact projectors based on single-chip DLP™ technology. The iVision sx+ employs an SXGA+ native resolution DMD™, producing up to 2,500 ANSI lumens and 2000:1 contrast. The iVision HD-7 and HD-X employ a DMD™with 1280 x 720 pixels and respectively produce stunning 3000:1 and 4000:1 contrast through 1,000 ANSI lumens. Thesecost-effective projectors bring the extraordinary performance and imaging expertise of Digital Projection within reach of every application. The iVisions’ intuitive user controls and extensive source compatibility render them simple to integrate, control and operate. The projectors’ low-cost, long-life UHP™ lamp system and inherent digital stability position the iVision series as perfect projection solutions for a diverse range of customers and applications, including: • Dramatic home entertainment • Digital media and advertising • Corporate boardrooms and teleconferencing suites • Training and education • Retail and entertainment • Religious venues/houses of worship • Casinos and hospitality • Military simulation/command and control • Immersive visualization As is the case with all Digital Projection displays, our careful engineering guarantees iVision displays provide remarkable imaging and reliability for the long-term. Equally important,our legacy in superior customer and technical ser vices assures our experienced support staff is always available to address your needs. The iVision sx+, iVision HD-7 and iVision HD-X — ultra-compact,awe-inspiring displays—bringing the precision of Digital Projection to every venue. Specifications subject to change without notice DP V4.03/07 ©2007 Digital Projection, Inc. ™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc. INPUT / OUTPUT CAPABILITIES Input* VGA/analog RGB DVI (Digital RGB) Component Video (SDTV/HDTV) S-Video Composite VIdeo USB for mouse connection and firmware upgrade LAN Stereo mini jack audio Screen trigger Outputs VGA monitor out Stereo mini jack audio * Four audio inputs on stereo mini plugs for sources listed above Connector D Sub (15-pin) DVI-D RCAx3 4-pin mini DIN RCA USB RJ45 D Sub (15-pin)QuantitySX+ HD-7/HD-X21 11 12 11 11 11 11 1 n/a n/a 1 1 n/a 1 n/a
DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD. SUITE 115. KENNESAW. GA. 30144 • T-770.420.1350 • F-770.420.1360 • www.digitalprojection.com DIGITAL PROJECTION, LTD. • GREENSIDE WAY. MIDDLETON. MANCHESTER. UK. M24 IXX • T-+44.161.947.3300 • F-+44.161.684.7674 • www.digitalprojection.co.uk Projector dimensions (mm) W1278 H188 L1244Projector dimensions (in) W110.9 H13.5 L19.6 HDTV Formats Supported Scan Rates Supported Remote Control Automation Control Operating/Storage Temperature Operating Humidity Thermal Dissipation Fan Noise Power Requirements Power Consumption Safety and EMC Regulations ADVANCED TECHNICAL SPECIFICATIONS PARAMETERS 1080i, 720p, 576i/p, 480i, 480p Horizontal: 120kHz; Vertical: 50-110Hz Remote wireless IR RS232 9-pin D sub / RJ45 LAN Operating: 0 to 40°C at 0-1500m, 0 to 35°C at 1500-3000m / Storage: -10 to 45°C 20 to 90% RH 1300 BTU 28dB at 20°C (68°F) 90-260 VAC, 50/60Hz 350W UL, CE, FCC Class A iVision sx+ -includes 1.75-2.2:1 lens iVision sx+W -includes 1.0:1 lens iVision HD-7 -includes 1.75-2.25:1 lens iVision HD-7W -includes 1.0:1 lens iVision HD-7L -includes 2.5-3.5:1 lens iVision HD-X -includes 1.75-2.2:1 lens iVision HD-XW -includes 1.0:1 lens iVision HD-XL -includes 2.5-3.5:1 lensReplacement lamp module (HD/HD-7) Replacement lamp module (SX+) Low profile ceiling mount Adjustable ceiling mount Infrared remote (replacement for sx+) Infrared remote (replacement for HD-7 and HD-X) W1 H1L1 PROJECTORSPART NO. 103-735 103-736 103-976 103-977 103-978 104-694 104-695 104-696001-821 104-642 001-822 102-543 104-142 001-944 iVision HD-7 back panel ACCESSORIESPART NO. iVision sx+ back panel 1 Based on 4-6 hour/day operational profile. Venue and application conditions may impact actual lamp life. See Digital Projection’s Product Warranty Statement for details on lamp warranty.