Digital Projection Highlite 4100gv User Manual

When you first turn on your Highlite Displays projector you will get the startup
screen.
This screen gives you the opportunity to select one of the seven menu languages:
English, German, French, Italian, Spanish, Swedish and Japanese.
Use the cursor movement button to highlight the desired language and press
ENTER to select.
B—13
System Installation
Startup Screen (Language Select)
INSTALLATION
LBV00072; Revision A - 25/09/2001
+-
MENU
ENTER
+-
MENU
ENTER 

To close the menu without making a selection or to save your language selection,
press the CANCEL button.
To select or change the language later press MENU and navigate to ‘Projector
Options’ - ‘Menu’ - ‘Page1’ - ‘Language’ and follow the above instructions.
B—14
System Installation
INSTALLATION
LBV00072; Revision A - 25/09/2001
CANCEL 

CONNECTING A VIDEO RECORDER OR LASER DISC PLAYER
Video recorders and laser disc player connect to the HIGHlite DisplaysProjector
using common RCA cables (not provided). To make these connections, simply:
Connect one end of your RCA cable to the video output connector on the back 
of your video recorder or laser disc player and the other end to the Video input 
on your projector.
Refer to your VCR or laser disc player owners manual for more information
about your equipments video output requirements....

B—16
System Installation
INSTALLATION
LBV00072; Revision A - 25/09/2001 

Remote Control Overview ............................................... C—1
Direct Key Combinations ........................................... C—7
Basic/Custom Menu......................................................... C—8
Menu System Overview ................................................... C—9
Navigating the Menu System ..................................C—10
Menu Structure .........................................................C—11
Menu Operation...

Ref Adj.............................................................................C—30
Keystone ...................................................................C—30
Lamp ........................................................................C—31
Ref. White Bal............................................................C—31
Factory Default ..............................................................C—32
Projector Options ...........................................................C—33
Timer...

All the functions of a HIGHLite Displaysprojector can be controlled by the remote
control unit. The remote control can be directly connected to the projector via a 
control cable or to provide more flexibility send infra red signals which are detected
by sensors located at the front and rear of the projector.
A description of all the remote control functions is provided overleaf.
C—1
System Operation
Remote Control Overview
OPERATION
LBV00072; Revision A - 25/09/2001
OFF
+-
PICTUREADJUSTABC DEFGHI
JKL...

1 - POWER ON
Press to turn on the projector. The POWER indicator on the projector lights up
green.
2 - POWER OFF
Press and hold this button for a minimum of 2 seconds to turn off the projector.
3 - MENU
Press to display the main menu.
While pressing and holding CTL, press this button to display the Remote Control
ID dialog box to specify the remote control ID.
4 - ENTER
Executes the menu selection and activates items selected from the menu.
When the slidebar or dialog box is displayed:
Pressing this...

8 - IMAGE / PROJECTOR
Press to display the Image Option screen. Sequential presses of this button selects
“Pixel Adjust” - “Position” - “Aspect Ratio” - “Resolution”  - “Overscan” - “Video
Filter” - “Blanking”.
While pressing and holding CTL, sequentially pressing this button selects “On/Off
Timer” - “Sleep Timer” - “Menu” - “Setup” - “Link Mode” - “Switcher Control”.
9 - INPUT
Use to select an input, to name a signal or to enter a passcode during input registra-
tion.
1 - INPUT 1 for RGBHV / Y, Cr/Pr,...

13 - TEST
Press to display internal test pattern.
Sequential presses scroll through series of five test patterns.
14 - HELP
Provides on line help.
15 - PIXEL
Displays the Pixel Adjust screen to adjust pixel clock and phase.
16 - AUTO (RGB only)
Press to automatically adjust Position-H/V and Pixel Clock for optimal picture.
The Pixel Phase is not adjusted.
17 - POSITION
Press to display the Blanking screen; press again to display the position screen.
While pressing and holding CTL, press this button to...