Digital Projection Highlite 4000dsx User Manual

SLEEP TIMER
The Sleep Timer allows you to set the projector to automatically turn itself off after
a predefined time period. 
To activate the Sleep Timer:
1. Select your desired time between 30 minutes and 2 hours in 30 minutes.
2. Select Set and press the ENTER button on the remote control.
3. The remaining time starts counting down.
4. The projector will turn off after the countdown is complete.
Menu
The Menu window allows you to set preferences for the on-screen menu system.
C—35
System Operation...

Language- Up to seven languages are available for the on screen instructions. The
options are: English, German, French, Italian, Spanish, Swedish and Japanese.
Menu Display Time- The on screen menu display appears when the buttons on the
remote control, or the controls on the rear panel are pressed. The display can be set
to automatically turn off at a pre-selected time between 3 and 30 seconds after the
last menu action or set to manual operation. When set to manual, the display will be
turned on and...

C—37
System Operation
OPERATION
LBV00072; Revision A - 25/09/2001
2. Type in the current month, date and year using the input buttons on the remote 
control. The month and date must be entered in two digit format.
3. Enter the current time in 24-hour format.
4. Select OK and press ENTER. The clock will start when the window closes.
Setup
There are five Setup windows used to define the operating options for the projector. 
SETUP PAGE 1
Orientation- The projector can be set for floor projection, rear...

SETUP PAGE 2
Signal Select
RGB 1/2- Allows the RGB1 and RGB2 inputs to be defined as either RGB,
Component or Auto. When set to Auto the projector attempts to automatically
detect the signal type. However, certain component signals may not be detectable.
Sync Termination- Defines the impedance of the sync signal for the RGB1 and
RGB2 inputs. The default setting for normal use is 75½. Hi-Z should be selected
when using a TTL signal.
SETUP PAGE 3
C—38
System Operation
OPERATION
LBV00072; Revision A -...

Video 1/2- Allows the manual selection of composite video standards for the Video
1 and Video 2 inputs.
S-Video 1/2 - Allows the manual selection of composite video standards for the 
S-Video 1 and S-Video 2 inputs.
SETUP PAGE 4
Power Management- This feature automatically turns the projector off if there is
no RGB input for over five minutes. Power Management is not active for video 
signals.
Power Off Confirmation- Determines whether a confirmation dialogue is 
displayed when turning the projector...

Lens Memory - Applies the stored lens shift, focus and zoom adjustment values to
the selected signal.
On - Enables the lens memory function  and applies saved settings to the selected
signal
Off - Disables the lens memory function so there will be no application of stored
lens settings.
Values for lens shift, focus and zoom can be stored regardless of whether or not
the lens memory function is enabled.
Lens Memory feature is not available in Link Mode.
User Name- An 18 character user name may be assigned...

Projector ID- Each projector requires a unique address when used in serial 
communication mode. Up to 64 addresses are available by selecting Enable and
then using the spin buttons to change the ID number. To save the setting, select OK.
Default Source Select- The projector can be configured to display either the last
input used or a preset input whenever it is turned on.
Link Mode
This feature is used for multiple projector connection using RGB
Digital Input/Output connectors.
The master projector is...

When changing this setting, a confirmation box will appear.
If you want to restart your projector, select Yes, if not select No.
This setting only becomes effective following a restart of the projector.
Displays a list of all the files stored in the PC Card so that you can select a file you
want to display.
You can also sort files by file name or date, or display the file.
Although the list displays all the files in the PC Card, files can only be displayed in
text, HTML, JPEG or BMP format. To display...

CONTENTS
The Contents option provides a list of functions for which online help is available.
Underlined functions provide a direct link to the corresponding item by selecting
the option and pressing Enter.
SOURCE INFORMATION
Source information consists of three pages displaying the configuration of the 
current input signal.
C—43
System Operation
OPERATION
LBV00072; Revision A - 25/09/2001 

PROJECTOR INFORMATION
Displays information about the projector such as lamp usage, serial number, version
number etc. Projector Information provides four pages of information with page
four giving Link Mode details.
Page four of Projector Status displays the status of the master projector and linked
slave projectors. If more than three slave projectors are connected, the page buttons
can be used to display information on up to 16 slave projectors.
C—44
System Operation
OPERATION
LBV00072; Revision A -...