Digital Projection Dvision Sx+, 30sx+, Hd, Xg, 30xg Preliminary Specifications

							PERFORMANCE SPECIFICATIONS
Brightness (±10%)
sx+:  5,000 ANSI lumens
30sx+:  6,000 ANSI lumens
HD: 2,500 ANSI lumens
XG: 4,500 ANSI lumens
30XG:   5,500 ANSI lumens
Contrast Ratio (full on/full off)
ALL:  6000:1 with Iris
Display Type
sx+:  .95” DarkChip2™ DMD
HD: .8”   DarkChip3™ DMD
XG: .7” DarkChip3™ DMD
Sequential Color Management
sx+:  dual four segment color wheel
HD: dual six segment color wheel
XG: dual four segment color wheel
Native Resolution
sx+:   1400 x 1050 pixels
HD:    1280 x 720 pixels
XG:    1024 x 768 pixels
Computer Compatibility
Up to 1600 x 1200
Video Compatibility
HDTV, NTSC, NTSC 4.43, PAL,  PAL-M,  
PAL-N, SECAM; HDCP on DVI; Faroudja™
deinterlacing with automatic film mode
detection (3:2 and 2:2 pulldown)
Aspect Ratio (native)
sx+:  4x3      
HD:  16x9
XG:   4x3
Bandwidth (up to)
205 MHz on analog RGB
160 MHz on DVI
75 MHz on component input
•No lens shif t capability on short throw
fixed lenses
SX+ • 30SX+ • HD • XG • 30XG 
Digital Projection International proudly offers the dVision
series, ultra-quiet, dual lamp projectors based on single-
chip DLP™ technology.  Available in four distinct resolution
platforms including XGA, 720P, SXGA+ and 1080P,
dVisions employ either dual 250-watt lamps, producing up
to 5000 ANSI lumens, or dual 300 watt lamps, producing
up to 6000 ANSI lumens.  In either case, contrast ratios up
to 6000:1 can be achieved using the motorized lens
aperture, which allows the user to accurately define
contrast and brightness to match venue and content
requirements.   
The cost-effective dVisions bring the extraordinary
performance and imaging expertise of Digital Projection
within reach of every application.  A flexible range of ultra-
accurate optics deliver throw ratios as short as .75:1 and
as long as 9:1, as a function of screen width.  The dVision’s
quick-change motorized lens mount provides an extensive
range of horizontal and vertical lens shif t.  Every dVision is
also equipped with a motorized light shutter and a backlit
projector information display, which provides users with all
relevant data regarding the projector ’s operating status.  
Intuitive user controls and extensive source compatibility
render dVisions simple to integrate, control and operate.
The projectors’ low-cost, long-life dual UHP™ lamp system
and inherent digital stability position these products as
perfect projection solutions for a diverse range of
customers and applications, including:
•  Dramatic home entertainment
•  Digital media and advertising
•  Corporate boardrooms and teleconferencing suites
•  Training and education
•  Retail and entertainment
•  Religious venues/houses of worship
•  Casinos and hospitality
•  Military simulation/command and control
•  Immersive visualization
As is the case with all Digital Projection displays, our care-
ful engineering and superior customer and technical ser v-
ice guarantee dVision projectors will provide remarkable
imaging and reliability for the long-term. 
Specifications subject to change without notice   DP V3. 03/06  ©2006 Digital Projection, Inc.
™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc.
INPUT / OUTPUT AND CONTROL CAPABILITIES
Connector
15-pin female HD-DSUB
BNCx5 - female 
DVI-D - female
RCAx3 - female 
4-pin mini DIN- female 
RCAx1- female 
9-pin DSUB - female 
USB - female
RJ-45 - female
3.5mm stereo jack- female 
15-pin female HD-DSUB
9-pin DSUB - male 
Lens Shift (motorized)
sx+:  Vert: ±0.54; Hor: ±0.46
HD:  Vert: ±0.67; Hor: ±0.48
XG:    Vert: ±0.54; Hor: ±0.46
Motorized Iris
Enables the user to optimize 
lumen/contrast performance
Lenses
Image Size
0.7-5.5 meters (2.5-18f t) wide
Lamp Type
sx+, HD, XG:   Dual 250W UHP™
30sx+, 30XG:  Dual 300W UHP™
Lamp Life (Typical)
12,000 hours -lamp high per lamp
4,000 hours -lamp low per lamp
Mechanical Mounting
Front/rear table
Front/rear ceiling
Adjustable front/rear feet
Operating Noise Level
30dB (typical)
35dB (maximum)
Dimensions (excluding lens)
15.7in(L) x 19.7in(W) x 7.9in(H)
400mm(L) x 500mm(W) x 200mm(H)
Weight (chassis only)
27.8lbs (12.6kg)
Input
Video & computer
VGA / analog RGB
RGB analog
DVI (digital RGB)
Component Video
S-Video
Composite VIdeo
Communication & control
RS232
USB 
(for control & firmware update) LAN (for control & firmware update) Remote control
Outputs
VGA monitor out
RS232
HD:
0.875:1*
1.32:1
1.42-1.86:1
1.86-2.73:1
2.73-4.37:1
4.37-7.65:1 sx+:
0.8:1*
1.2:1
1.3-1.7:1
1.7-2.5:1
2.5-4.0:1
4.0-7.0:1XG:
1.1:1
1.65:1
1.78-2.32:1
2.32-3.42:1
3.42-5.47:1
5.47-9.57:1
PRELIMINARY SPECIFICATIONS 
						

							DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD. SUITE 115. KENNESAW. GA. 30144 • T-770.420.1350 • F-770.420.1360 • www.digitalprojection.com
DIGITAL PROJECTION, LTD. • GREENSIDE WAY. MIDDLETON. MANCHESTER. UK. M24 IXX • T-+44.161.947.3300 • F-+44.161.684.7674 • www.digitalprojection.co.uk
Projector dimensions (mm)
W1500   H1200   L1400Projector dimensions (in)
W119.7   H17.9   L115.7 
HDTV Formats Supported
Scan Rates Supported
Remote Control
Automation Control
Operating/Storage Temperature
Operating Humidity
Thermal Dissipation 
Fan Noise
Power Requirements
Power Consumption
Safety and EMC Regulations
ADVANCED TECHNICAL SPECIFICATIONS
PARAMETERS
1080i, 720p, 576i/p, 480i, 480p
Horizontal: 15-150kHz; Vertical: 48-190Hz
Remote wireless IR / wired thru 3.5mm stereo jack
RS232 9-pin D sub / RJ45 LAN / USB
Operating: 32 to 104°F at 0-4950 f t, 32 to 95°F at 4950-99,000 f t / Storage: 14 to 104°F 
20 to 90% RH
3500 BTU/hour 
28dB at 20°C (68°F)
90-260 VAC, 50/60Hz
900W
CSA, CE, FCC Class A
dVision sx+ 
dVision 30sx+
dVision HD
dVision XG
dVision 30XGReplacement lamp module2
Ceiling mount
Infrared remote (replacement)
PROJECTORSPART #
104-083
104-084
104-085
104-086
104-087
104-088104-089
104-090
104-091
dVision back panel
ACCESSORIESPART #
HD:
0.875:1
1.32:1
1.42-1.86:1
1.86-2.73:1
2.734.37:1
4.37-7.65:1
LENSESPART #
104-082
105-821
104-081
105-823
105-822
1 Based on 4-6 hour/day operational profile.  Venue and application conditions may impact actual lamp life.
See Digital Projection’s Product Warranty Statement for details on lamp warranty.
2 Two lamps required for full lumen performance
XG:
1.1:1
1.65:1
1.78-2.32:1
2.32-3.42:1
3.42-5.47:1
5.47-9.57:1 sx+:
0.8:1
1.2:1
1.3-1.7:1
11.7-2.5:1
2.5-4.0:1
4.0-7.0:1