Denon Dht 1356xp Product sheet

							DHT-1356XP (AVR-1306 + SYS-56HT)
5.1ch Home Theater in a Box
 High-Quality Surround Sound Reproduction
• High Resolution 32bit Floating Point DSP
• 96 kHz Processing Circuit
 Fully Discrete, Equal Power 5 Amplifier Channels, 75 Watts Each
Front 75 W + 75 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
Center 75 W  (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
Surround 75 W + 75 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
For optimum Dolby Digital and DTS reproduction, the AVR-1306 features high quality, wideband
audio amplification, providing 75 watts power  output for each of the 5 main channels. A large
capacity power supply includes a high current power transformer along with discrete power
output devices on all 5 amplifier channels for highest dynamic range and superb reproduction
clarity.
 DENONs Basic Design for High-Quality Sound Reproduction
• Power Transformer for High Power Driven
The chassis that supports the large transformer has been designed to absorb vibration, and
the transformer is housed inside a highly rigid frame to secure it more solidly to the chassis. In
addition, a cushioning material has been placed around the core of the transformer to minimize
interference on the signal and enable more faithful reproduction of the original sound. The AVR-
1306 inherits these low-noise design from higher-end models.
• Twin Drive Rectifier
DENONs Twin Drive Rectifier design uses two rectifying diodes in parallel to bring out the maxi-
mum potential of the large transformer. Since the rectifiers recharge the large block capaci-
tors at low impedance, they are able to supply ample current to reproduce deep basses as well
as sudden bursts of sound from percussion or other musical instruments.
• Large Aluminum Extruded Heatsink
DENON uses large heatsink made of extruded aluminum.They have been placed in a design
that ensures mostly uniform temperatures throughout the heatsink so that the output transis-
tors for all channels can be driven under uniform conditions. This in turn ensures that all
channels respond with equal performance to the demands of the audio signals.
 Wide-Range Play Capability for DVD-Audio and Super Audio CD
The power amp circuits of the AVR-1306 have been meticulously designed to reproduce the
exceptionally high sound quality with wide frequency response from 10 Hz to 100 kHz.
 Cinema Equalizer
The sound from movie sources recorded in Dolby Digital, DTS or other formats emphasizes
high-frequency range due to a theater’s front speakers being placed behind the movie
screen. If this sound is reproduced in the home theater without correction, the high-frequency
range is too strong. The AVR-1306 features a Cinema Equalizer to correct these high-
frequency components so that the sound is clearer and easier to listen to. 
(For Dolby Digital, Dolby Pro Logic II, Dolby Digital and DTS surround modes)
 Personal Memory Plus, for Easy Operation
The AVR-1306 includes the Personal Memory Plus function that automatically remembers
the surround mode you last used for each program source, so that you do not need to select
the mode again for that program. Acclaimed Customization Feature
As with all of DENON’s high-grade A/V receiver, the AVR-1306 lets you adjust delay times
and other parameters so that you can customize the performance of the AVR-1306 to suit
your own home theater and enhance operating ease. The adjustments are easy to make
via a dialog format on the fluorescent display on the front panel. These customized features
are then stored, for each source input and surround mode, in Personal Memory Plus so
constant readjustments are not required.
 Multi-Function Preset Memory Remote Controller with Glo-keys
 DENONs Latest Surround Technology Faithfully Recreates the 
Surround Sound Produced at the Dubbing Stage.
• DTS 96/24 Decoding for DVD-Video
• DTS (NEO:6)
• Dolby Digital 
• Dolby Pro Logic II
 5 ChannelStereo Mode
DENONs popular 5 Channel Stereo mode transforms your favorite 2-channel sources such
as CD, tape, stereo radio and stereo video sources into exciting surround sound, free of
delay effects and unnatural artifacts, from all 5 speakers. This 5 Channel Stereo mode was orig-
inally developed by DENON to enhance music lovers enjoyment with home theater ambience.
 DENON DSP Surround Modes Add Listening Excitement
Put yourself in the middle of your favorite concert hall and music environments with DENONs
DSP acoustic environment simulation modes. These DSP modes add spacious surround
sound enhancements to your favorite music and video sources, and include these distinctly
different sounding effects:
1. 5 Channel Stereo 5. Video Game
2. Virtual Surround 6. Matrix
3. Rock Arena 7. Mono Movie
4. Jazz Club
 Adjustable Cross-Over Switching
The AVR-1306 supports subwoofer cross-over switching with a choice of 8 cross-over fre-
quencies: 40/60/80/100/120/150/200/250Hz. This lets you more accurately match
the performance characteristics of the subwoofer to the main speaker system.
Other features

Night Mode for not disturbing others 
 Front Panel Inputs
 Front A/B Speaker Terminals
 Frequency Synthesis Tuning
• 56-Station AM/FM Random Preset Memory Tuning
• Auto Preset Memory
DHT1356XP_E2.qxd  05.12.5 10:13  Page 1
 
						

							Input/Output Terminals for Every A/V System (AVR-1306)
Audio Inputs
8 Analog Inputs  CD, (TUNER), DVD/VDP, TV/DBS,
AUX, VCR, CDR/TAPE, V.AUX(FRONT)
6 Analog EXT. Inputs FRONT L/R, CENTER, 
SURROUND L/R, SUBWOOFER
3 Digital Inputs  OPTICAL X 1
COAXIAL X 2
Audio Outputs
1 Analog PRE OUT Terminal SUBWOOFER
2 Analog REC OUT Terminals VCR, CDR/TAPE
Video Inputs
4 Composite Inputs DVD/VDP, TV/DBS, VCR, V.AUX (FRONT)
Video Outputs
2 Composite Outputs VCR, MONITOR
Specifications

AVR-1306
Power Amplifier Section
Rated output *THD figures are power amp stage values.
Front 75 W + 75 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
110 W + 110 W (6 ohms, 1 kHz, 0.7 % THD)
Center 75 W  (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
110 W   (6 ohms, 1 kHz, 0.7 % THD)
Surround 75 W + 75 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
110 W + 110 W (6 ohms, 1 kHz, 0.7 % THD)
Preamplifier Section
Input sensitivity/Impedance
CD, DVD/VDP, TV/DBS, VCR, CDR/TAPE, AUX,V.AUX(FRONT)
200 mV/47 kohms
Output level/Load impedance
SUBWOOFER 1.2 V/10 kohms
CDR/TAPE, VCR 200 mV/47 kohms
Frequency response 10 Hz - 100 kHz (+1, -3 dB) (Tone Defeat On)
Signal-to-noise ratio 98 dB (IHF-A weighted) (Tone Defeat On)
Tone control Treble: ±10 dB at 10 kHz
Bass: ±10 dB at 100 Hz
FM Section
Tuning frequency range 87.5 - 108.0 MHz
Usable sensitivity 1.0 µV (11.2 dBf)
AM Section
Tuning frequency range 522 - 1611 kHz
Usable sensitivity 18 µV
General
Power supply AC 230 V, 50 Hz
Power consumption 350 W
Dimensions 434 (W) x 147 (H) x 417 (D) mm
Weight 10.4 kg   5.1 ch Speaker System: SYS-56HT 
SC-A56 (Satellite speaker system)
Type  Full-range 2 speakers
Magnetic shielding Yes
Input impedance 6 ohms
Dimensions 84 (W) x 189 (H) x 110 (D) mm
Weight 1.2 kg
SC-C56 (Center speaker system)
Type  Full-range 2 speakers 
Magnetic shielding Yes
Input impedance 6 ohms
Dimensions 263 (W) x 84 (H) x 110 (D) mm
Weight 1.4 kg
DSW-56 (Subwoofer system with built-in Amplifier)
Driver unit 16 cm Woofer x1  
Amplifier Output 50W (6ohms) / 100 W (Dynamic Power)
Input impedance 22 kohms
Power supply AC 230 V, 50 Hz
Dimensions 210 (W) x 353 (H) x 379 (D) mm (with feet)
Weight 9.2 kg
DHT-1356XP
* Design and specifications are subject to change without notice.
* ”Dolby”, “Dolby Digital”, “Pro Logic II”, “Dolby Digital” and  the double-D device are registered trademarks of Dolby Laboratories  Licensing Corporation.
* DTS is registered trademarks of DTS Technology.
Denon Brand Company
Kayabacho Tower 14F 1-21-2 Shinkawa, Chuo-ku, Tokyo 104-0033, Japan  
www.denon.com
53201205 AVR-1306’s back panel
DHT1356XP_E2.qxd  05.12.5 10:13  Page 2