Dell U2311h Users Guide

							Press   to increase the green shade of the video image.  
Press   to increase the purple shade of the video image.  
 
NOTE:  Hue adjustment is available only for video input.  
 
Saturation
This feature can adjust the color saturation of the video image. Use    or   to adjust the saturation from 0 to 100.  
Press   to increase the monochrome appearance of the video image.  
Press   to increase the colorful appearance of the video image.  
 
NOTE:  Saturation adjustment is available only for video input.  
  
Reset Color Setting
s    R eset your monitor color settings to the factory settings.
 
    Display Settings   Use the Display Settings to adjust image.   
 
   
     
						

							Back to Contents Page   
Setting Up Your Monitor   
 
Setting the display resolution to  1920 x 1080 (for U2211H) or 1920 x 1080 (for 
U2311H) ( maximum)  
For maximum display performance with Microsoft ®
  Windows ®
  operating systems, set the display resolution to  1920 x 1080   (for U2211H) or   1920 x 1080  
(for U2311H)   pixels by performing the following steps:  
In Windows XP:  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Move the slider - bar to the right by pressing and holding the left - mouse button and adjust the screen resolution to  1920 x 1080   (for U2211H) or   1920 x 
1080   (for U2311H).  
4. Click  OK .  
In Windows Vista ®
  or Windows ®
  7:  
1. Right - click on the desktop and click  Personalization .  
2. Click  Change Display Settings .  
3. Move the slider - bar to the right by pressing and holding  the  left - mouse button and adjust the screen   resolution to  1920 x 1080   (for U2211H) or   1920 x 
1080   (for U2311H).  
4. Click  OK .  
If you do not see  1920 x 1080   (for U2211H) or   1920 x 1080   (for U2311H) as an option, you may need to update your graphics driver. Please choose the 
scenario below that best describes the computer system you are using, and follow the provided directions:  
1:   
2:   
Back to Contents Page     
						

							 
Information in this document is subject to change without notice.  
   
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.  
Trademarks used in this text:  Dell  and the  DELL  logo are trademarks of Dell Inc;  Microsoft  and  Windows  are either trademarks or registered trademarks of 
Microsoft Corporation in the United States and/or other countries,  Intel  is a registered trademark of Intel Corporation in the U.S. and other countries; and ATI 
is a trademark of Advanced Micro Devices, Inc.   ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR 
partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.  
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. 
disclaims any proprietary interest in trademarks and trade names other than its own.   
Model U2211Ht / U2311Hb  
Ma y  2010 Rev. A0 1  User Guide  
 
Setting the display resolution to 1920 x 1080 (for U2211H) or 1920 x 1080 (for U2311H)  (maximum)     
						

							Back to Contents Page    
 
Setting Up the Monitor   
 
   Attaching the Stand  
   Connecting the Monitor  
   Organizing Your Cables  
   Attaching the Soundbar (optional)  
   Removing the Stand    
   Wall Mounting (Optional)  
Attaching the Stand  
 
To attach the monitor stand:  
1. Remove the cover and place the monitor on it.   
2. Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.   
3. Press the stand till it snaps into its place.   
Connecting Your Monitor  
To connect your monitor to the computer:  
1. Turn off your computer and disconnect the power cable.   NOTE:  The stand is detached when the monitor is shipped from the factory.
NOTE:   This is applicable for a monitor with a stand. When other stand is bought, please refer to the respective stand setup guide for set up 
instructions.
 WARNING:  Before you begin any of the procedures in this section, follow the  Safety Instructions .  
Connect the blue (VGA) cable from your monitor to your computer.
 
NOTE:  If your computer supports a white DVI connector, unscrew and detach the blue (VGA) cable from the monitor and then 
connect the White DVI cable to the monitor and the white DVI connector on your computer.