Dell Sx2210 Users Guide
Have a look at the manual Dell Sx2210 Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Notes, Notices, and Cautions Information in this document is subject to change without notice. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: DELL and the DELL logo are trademarks of Dell Inc; Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries; ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. Model SX2210b About Your Monitor Setting Up the Monitor Operating the Monitor Troubleshooting Appendix NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Back to Contents Page
About Your Monitor
SX2210 Flat Panel Monitor Users Guide
Package Contents
Your monitor comes with all the items shown below. Ensure that you have all the items. If something is missing, contact Dell .
Package Contents
Product Features
Identifying Parts and Controls
Monitor Specifications
Universal Serial Bus (USB) Interface
Plug and Play Capability
Camera - MIC Specifications
Maintenance Guidelines
NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in
certain countries.
l Monitor with stand
l Power cable
l Power adapter
l VGA cable
Product Features The flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 21.5 inches (546.8 mm) diagonal. ■ 1920 X 1080 resolution, plus full - screen support for lower resolutions. ■ Tilt adjustment capabilities. ■ Plug and play capability if supported by your system. ■ On - Screen Display (OSD) adjustments for ease of set - up and screen optimization. ■ Software and documentation media which includes an information file (INF), Image Color Matching File (ICM), Webcam Software, Facial Recognition Software, and product documentation. ■ Energy Saver feature for Energy Star compliance. ■ Security lock slot. ■ 2.0 Mega pixel internal webcam with integrated microphone. Identifying Parts and Controls Front View l DVI cable l USB up stream cable (enables the USB ports on the monitor) l USB down stream cable (optional) l Documentation (Safety Information, Quick Start Guide, and CD) Front View Label Description Shortcut keys (for more information, see Operating the Monitor )
Back View Side View Bottom View 1 - 2 *The default settings are Preset Modes select and Brightness/Contrast select . 1 Preset Modes select 2 Brightness/Contrast select 3 OSD menu select 4 EXIT 5 Power button (with light indicator) 6 Webcam 7 Microphone Back view Back View with monitor stand Label Description Use 1 Barcode serial number label T o contact Dell for technical support. 2 Security lock slot T o help secure your monitor. 3 Dell soundbar mounting brackets To attach the optional Dell Soundbar. 4 USB downstream port To connect the USB cable. 5 Regulatory rating label Lists the regulatory approvals. 6 Cable management slot T o organize cables by placing them through the slot. Right view
Monitor Specifications The following sections give you information about the various power management modes and pin assignments for various connectors of your monitor. Power Management Modes If you have VESAs compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as Power Save Mode . If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature: Activate the computer and wake up the monitor to gain access to the OSD . Bottom view Label Description 1 DC power cord connector 2 Audio Line - in 3 Audio Line - out 4 HDMI connector 5 DVI connector 6 VGA connector 7 USB upstream port 8 USB downstream ports (2) VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Normal operation and USB active Active Active Active White 58 W (maximum) Normal operation Active Active Active White 47 W (typical) Active - off mode Inactive Inactive Blanked Amber 0.84 W Switch off - - - Off 0.74 W NOTE: The OSD functions in the Normal operation mode. One of the following messages appears when the menu key is touched in Active - off mode. or
Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the power adapter. Pin Assignments VGA Connector NOTE: This monitor is ENERGY STAR ® - compliant. Pin Number 15 - pin Side of the Co nnected Signal Cable 1 Video - Red 2 Video - Green 3 Video - Blue 4 GND 5 Self - test 6 GND - R 7 GND - G 8 GND - B 9 Computer 5V 10 GND - sync 11 GND 12 DDC data 13 H - sync 14 V - sync 15 DDC clock Pin Number 24 - pin Side of th e C o nnected Signal Cable 1 TMDS RX2 - 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1 - 10 TMDS RX1+ 11 TMDS Ground 12 Floating
Universal Serial Bus (USB) Interface This section gives you information about the USB ports that are available on the left side of your monitor. USB Upstream Connector 13 Floating 14 +5V power 15 Self test 16 Hot Plug Detect 17 TMDS RX0 - 18 TMDS RX0+ 19 TMDS Ground 20 Floating 21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock - Pin Number 19 - pin Side of th e C o nnected Signal Cable 1 T.M.D.S. Data 2 - 2 T.M.D.S. Data 2 Shield 3 T.M.D.S. Data 2+ 4 T.M.D.S. Data 1+ 5 T.M.D.S. Data 1 Shield 6 T.M.D.S. Data 1 - 7 T.M.D.S. Data 0+ 8 T.M.D.S. Data 0 Shield 9 T.M.D.S. Data 0 - 10 T.M.D.S. Clock + 11 T.M.D.S. Clock Shield 12 T.M.D.S. Clock - 13 CEC 14 Reserved (N.C. on device) 15 SCL 16 SDA 17 DDC/CEC Ground 18 +5V Power 19 Hot Plug Detect NOTE: This monitor supports High - Speed Certified USB 2.0 interface Transfer speed Data Rate Power Consumption High speed 480 Mbps 2.5W (Max., each portyf Full speed 12 Mbps 2.5W (Max., each portyf Low speed 1.5 Mbps 2.5W (Max., each portyf
USB Downstream Connector USB Ports l 1 upstream - back l 2 downstream at back & 2 downstream at bottom Camera - MIC Specifications Overview The integrated USB camera and analog microphones allow you to take pictures, videos, and communicate with other computer users. The camera is located at the top of the monitor and is fixed. However, the camera ’ s software -- Dell Webcam Software suite, provides limited panning abilities. When the camera is on, the white light next to the camera turns on. System Requirements The following are the minimum system requirements for the Dell Webcam Software Suite: l Intel ® Pentium ® 4 or AMD ® equivalent processor running at 2.4 GHz or higher (Recommended: Intel Pentium Core 2 Duo E4300 or AMD equivalent processor running at 2.8 GHz with Hyper - Threading enabled) l Microsoft ® Windows ® XP Service Pack 2 or Windows Vista ® l 256 MB RAM (2 GB RAM or higher recommended) l 580 MB free hard disk space Pin Number 4 - pin Side of the connector 1 DMU 2 VCC 3 DPU 4 GND Pin Number 4 - Pin Side of the Signal Cable 1 VCC 2 DMD 3 DPD 4 GND NOTE: USB 2.0 functionality requires a USB 2.0 - capable computer NOTE: The monitors USB interface works only when the monitor is on or in power save mode. If you turn off the monitor and then turn it on, the attached peripherals may take a few seconds to resume normal functionality. Lens Field of view 66.2 degree +/ - 5 % Focus mode Fixed Focus Focus area 37 cm~Infinity Focusing distance (normal modeyf 1.100 mm Image Sensor Active array size 2.0 mega - pixel Video specification Video frame rate 1600 x 1200 (UXGA) - up to 10 frames per second 640 x 480 (VGA) and below - up to 30 frames per second Image flip Horizontally Digital zoom 2x Audio Specification Microphone type Dual Microphone Interface USB 2.0 high Speed Power Supply 3.3 volts +/ - 5%
l Available USB 2.0 port or a USB 2.0 hub with external power supply Dell Webcam Software Suite The Dell Webcam Software Suite includes the following applications: Dell Webcam Central enables convenient access to all exciting applications to enhance your Dell Webcam experience. Creative Live! Cam Avatar Creator lets you personalize an animated avatar from any digital photo you want. Using advanced speech technology, your personalized avatar even lip syncs with you. Share creation with friends using Live! Cam Avatar, via email or even YouTube™. Facial Recognition Software (FastAccess) Face recognition technology greatly reduces the need to manually log in with passwords, while providing superior security and functionality compared to passwords and other biometrics (for Windows Vista ® only). Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see Operating the Monitor . Flat Panel Specifications * SX2210 color gamut (typical) is based on CIE1976 (85%) and CIE1931 (72%) test standards. Resolution Specifications Video Supported Modes Screen type Active matrix - TFT LCD Panel Type TN Screen dimensions 21.5 inches (21.5 - inch viewable image size) Preset display area: Horizontal: Vertical: 476.64 mm (18.76 inches) 268.11 mm (10.56 inches) Pixel pitch 0.248 mm Viewing angle 160° (verticalyfW\SLFDO
Preset Display Modes Electrical Specifications Physical Characteristics Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) 640 x 350 31.47 70.09 25.18 +/ - 640 x 400 31.47 70.09 25.18 - / + 640 x 480 31.47 59.94 25.17 - / - 640 x 480 31. 50 75.00 31.5 - / - 720 x 400 31.47 70.08 28.32 - /+ 800 x 600 37.88 60.32 40.00 +/+ 800 x 600 46.880 75.00 49.50 +/+ 1024 x 768 48.36 60.00 65.00 - / - 1024 x 768 60.02 75.03 78.75 +/+ 1152 x 864 67.50 75.00 108.00 +/+ 1280 x 1024 63.98 60.02 108.00 +/+ 1280 x 1024 79.98 75.02 135.00 +/+ 1920 x 1080 - R 66.587 59.934 138.50 +/ - 1920 x 1080 55.62 49.92 141.50 - /+ Video input signals Analog RGB, 0.7 Volts +/ - 5%, positive polarity at 75 ohm input impedance Digital DVI - D TMDS, HDMI, 600mV for each differential line, positive polarity at 50 ohm input impedance Audio Input and Output signals Input signal level: 1Vrms without chipping Synchronization input signals Separate horizontal and vertical synchronizations, polarity - free TTL level, SOG (Composite SYNC on green) AC/DC Adaptor input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/1.6A (Max.) For use only with power supply DELL, DA65NS4 - 00. Inrush current 120 V: 30 A (Max.) 240 V: 60 A (Max.) Connector type 15 - pin D - sub miniature, blue connector; DVI - D, white connector; HDMI, Black connector Signal cable type Digital: Detachable, DVI - D, Solid pins, shipped detached from the monitor Analog: Detachable, D - Sub, 15pins, shipped attached to the monitor HDMI: Detachable, HDMI - A, Solid pins, shipped without cable Dimensions (with stand) Height 382.59 mm (15.63 inches) Width 529.93 mm (20.86 inches)