Dell Se198wfp Users Guide

 
Notes, Notices, and Cautions  
   
   
   
   
Information in this document is subject to change without notice.  
2006 -  
Reproduction in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  Dell , the  DELL  logo,  Inspiron ,  Dell Precision ,  Dimension ,  OptiPlex ,  Latitude, PowerEdge, PowerVault, PowerApp, and Dell OpenManage  are trademarks of Dell 
Inc;  Microsoft, Windows, and Windows NT are either trademarks or...

Back to Contents Page    
About Your Monitor   
 
   Front View  
   Back View  
   Side View  
   Bottom View  
   Monitor Specifications  
    Caring for your Monitor  
Front View  
 
 
Back View  1.   Input signal select  button  
2.   OSD menu / Select button  
3.    Brightness and Contrast / Down button  
4.   Auto - adjust / Up button  
5.   Power On / Off button (with LED indicator)  
 
   
1   VESA mounting holes (100mm) (Behind 
attached base plate)   Use to mount the monitor.  
2   Barcode...

Bottom View  
 
Side View  
Monitor Specifications  3   Security lock slot   Use a security lock with the slot to help secure your monitor.  
4   Stand removal button    Press to release the stand .  
5   Regulatory rating label    List the regulatory approvals.   
6   Dell Soundbar mounting brackets   Attach the optional Dell Soundbar.  
7   Cable management hole   Help organize cables by placing them in the hole.   
1   Power connector   Insert the power cable.  
2   Dell Soundbar power connector...

Power Management Modes  
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is 
referred to as Power Save Mode. The monitor automatically resumes functioning when the system detects input from the keyboard, mouse or other input devices.The 
following table shows the power consumption and signaling of this automatic power saving feature:   
   
Activate the computer and the monitor to gain...

24 - pin Digital - only DVI Connector  
 
Note: Pin 1 is at the top right.  
Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) 
using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can 
select different settings if required.  10   GND - sync  
11...

Resolution  
Horizontal scan range   30 kHz to 83 kHz (automatic)  
Vertical scan range   56 Hz to 75 Hz (automaticyf  
Optimal preset resolution   1440 x 900 at 60 Hz  
Highest preset resolution 1440 x 900 at 75 Hz
Video Supported Modes     
Video display capabilities (DVI playback)   480i/480p/576i/576p/720p/1080i/1080p (Supports HDCP)  
Preset Display Modes  
The following table lists the preset modes for which Dell guarantees image size and centering:    
    Display Mode   Horizontal Frequency (kHz)...

                  
Caring for your Monitor  
l To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen - cleaning tissue or solution suitable for the antistatic 
coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.   
l Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.    
l If you notice a white powder when you unpack...

Back to Contents Page    
Appendix   
 
  FCC Notice (U.S. Only)  
  CAUTION: Safety Instruction  
  Contacting Dell  
  Your Monitor Set - up Guide  
   
FCC Notice (U.S. Only)  
FCC Class B   
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer ’ s instruction manual, may 
cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital...

routed appropriately.    
l For support by phone, use the phone numbers and codes provided in the following table. If you need assistance in determining which codes to use, 
contact a local or an international operator.   
   NOTE: The contact information provided was deemed correct at the time that this document went to print and issubject to change.  
   
Country (City)  
International Access Code    
Country Code  
City Code    Service Type   Area Codes,  
Local Numbers, and  
Toll - Free Numbers...

    la - [email protected]
  Technical Support, Customer Service, Sales    toll - free: 800 - 10 - 0238
Brazil  
International Access Code: 00  
Country Code: 55  
City Code: 51     Online Support 
  www.dell.com/br  
    BR - [email protected]
  Customer Service and Tech Support    0800 90 3355
  Technical Support Fax   51 2104 5470 
  Customer Service Fax   51 2104 5480
  Sales   0800 970 3390 
British Virgin Islands   Technical Support, Customer Service, Sales    toll - free: 1 - 866 - 278 -...