Dell S2209w Users Guide

 
Notes, Notices, and Cautions  
Information in this document is subject to change without notice.  
2008  
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  Dell  and the  DELL  logo   are trademarks of Dell Inc;   Microsoft  and  Windows  are either trademarks or registered trademarks of Microsoft Corporation in 
the United States and/or other countries;  Adobe  is a trademark of Adobe Systems...

Back to Contents Page    
    
 
 
   Package Contents  
   Product Features  
   Identifying Parts and Controls  
   Monitor Specifications  
   Plug and Play Capability  
   LCD Monitor Quality & Pixel Policy  
   Maintenance Guidelines  
Package Contents    
Your monitor ships with the components shown below. Ensure that you have received all the components and  contact Dell  if something is missing.  
  NOTE:  Some items may be optional and may not ship with your Monitor. Some features or media may...

   
Product Features  
The  S2209W  flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include:   
■  21.5 - inch (546.8 mm) viewable area display.   
■  1920 x 1080 resolution, plus full - screen support for lower resolutions.   
■  Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side to side.   
■  Tilt adjustment capability.   
■  Removable pedestal and Video Electronics Standards...

 
 
 
   
Side View  
  
Bottom View  
  Label Description/Use
1 VESA mounting holes (100mm)  
(Behind attached base plate)   T o mount the monitor.  
2 Barcode serial number label T o contact Dell for technical support.
3 Security lock slot T o help secure your monitor.
4 Dell Soundbar mounting brackets To attach the optional Dell Soundbar.
5 Regulatory rating label Lists the regulatory approvals.
6 Cable management slot T o organize cables by placing them through the slot.
   Left side  

 
 
Bottom view  
 
   
Monitor Specifications  
Power Management Modes  
If you have VESA's DPMS™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in 
use. This is referred to as Power Save Mode. If input from a keyboard, mouse or other input devices is detected by the computer, the monitor will automatically 
wake up. The following table shows the power consumption and signaling of this automatic power - saving feature:...

 
 2   Video - Green  
3   Video - Blue  
4   GND  
5   Self - test  
6   GND - R  
7   GND - G  
8   GND - B  
9   Computer 5V/3.3V  
10   GND - sync  
11   GND  
12   DDC data  
13   H - sync  
14   V - sync  
15   DDC clock  
Pin 
Number   24 - pin Side of the Connected Signal 
Cable  
1 TMDS RX2 -
2 TMDS RX2+
3 TMDS Ground
4 Floating
5 Floating
6 DDC Clock
7 DDC Data
8 Floating
9 TMDS RX1 -
10 TMDS RX1+
11 TMDS Ground
12 Floating
13 Floating
14 +5V/+3.3V power  
15 Self test 
16 Hot Plug Detect
17...

Flat Panel Specifications  
* S2209W Color Gamut (Typical) is based on CIE1976 (85%) and CIE1931 (72%).  
Resolution  
Video Supported Modes  
Preset Display Modes  
Electrical  24 TMDS Clock -
Screen type Active matrix  -  TFT LCD
Panel type TN
Screen dimensions 21.5 inches (21.5 - inch viewable image size)
Preset display area:
Horizontal 476.64 mm (18.76 inches)
Vertical 268.11 mm (10.56 inches)
Pixel pitch 0.248 mm
Viewing angle 160° (verticalyfW\SLFDO

Physical Characteristics  
Environmental  Video input signals Analog RGB, 0.7 Volts +/ -  5%, positive polarity at 75 ohm input 
impedance  
Digital DVI - D TMDS, 600mV for each differential line, positive 
polarity at 50 ohm input impedance
Synchronization input signals Separate horizontal and vertical synchronizations, polarity - free 
TTL level, SOG (Composite SYNC on green)
AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz  +  3 Hz/2.0A (Max.)
Inrush iso surge current 110 V: 30 A (Max.)...

Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display 
Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. If required, 
the user can select different settings, but in most cases monitor installation is automatic.  
LCD Monitor Quality & Pixel Policy  
During the LCD Monitor manufacturing...

Back to Contents Page    
 
Appendix  
 
   Safety Instructions  
   FCC Notice (U.S. Only) and Other Regulatory Information  
   Contacting Dell  
   
CAUTION: Safety Instructions  
For information on safety instructions, see the  Safety Information .  
FCC Notice (U.S. Only) and Other Regulatory Information  
For FCC notices and other regulatory information, see the regulatory compliance website located at  www.dell.com
egulatory_compliance .  
Contacting Dell  
For customers in the United States, call...