Dell Projector 4220/4320 User Manual
Have a look at the manual Dell Projector 4220/4320 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Using Your Projector71 Set up PtG Converter - Lite Please follow the on-screen instructions to complete the setup.
72Using Your Projector PtG Converter - Lite Application Software Please launch the PtG Converter - Lite. The below screen appears: 1 Click to start conversion. 2Select the PowerPoint file you want to convert. 3Click Browse button to select the storage location and then press OK. NOTE: 1If your computer does not have MS PowerPoint installed, file convert will fail. 2PtG converter only supports up to 20 pages. 3PtG converter only supports conversi on of .ppt files to .PtG files.
Using Your Projector73 Audio Projection Installation Audio Projection only supports the Wireless Display and LAN Display source. Minimum system requirements as follow: Operation System: •Windows Microsoft Windows XP™ Home or Professional Service pack 2/3 (32-bit recommended), Windows Vista 32-bit, or Windows® 7 Home or Professional 32-bit or 64-bit Minimum Hardware: a Intel® Core™ i5-460 MHz (2.53 GHz/Turbo 2.8 GHz) or greater b1 GB DDR3 VRAM independent graphics card or more recommended c2 GB dual channel DDR3 SDRAM memory at 1066 MHz required or more recommended dGigabit Ethernet eIntegrated 802.11 b/g/n Wi-Fi Device for a WLAN connection NOTE: Audio Projection functi on not supports the MAC operation system. NOTE: If your computer does not meet t he minimum hardware requirements, audio projection may have lag or noise. Meet the recommended system requirements to have optimized performance of audio projection. NOTE: Audio Projection Setting steps are the same for the 4220 and 4320 models. Follow these steps to set up the audio projection function:
74Using Your Projector Enable Wireless or LAN on the Projector 1Connect the power cable and turn on the projector by pressing the power button. 2.1If you choose the LAN connection mode, follow these steps to enable Wireless and LAN function (default is Enabled): Advanced Settings LAN Settings Wireless and LAN Enabled. 2.2If you choose the wireless connection mode, follow these steps to enable wireless connection (default is Connected): Advanced Settings Wireless Settings Wireless Connected. NOTE: If your want to use the wireless connection for 4220 or 4320 projector, need installed the optional wireless do ngle. See Installing the Optional Wireless Dongle on page 11.
Using Your Projector75 3Access the Input Source menu, select the Wireless/USB and then select the Wireless Display on the sub-menu. The Wireless Guide Screen shown below appears: 4 Take note of the LOGIN CODE, NETWORK NAME (SSID), and IP ADDRESS . You will need these information to log in later. Install the Dell Wireless Applic ation Software on Your Computer 5Connect the LAN cable to the projector and the computer.
76Using Your Projector NOTE: If your projector has installed the optional wireless dongle, you can also select the wireless connection. See Wireless Connection on page 60. NOTE: It is recommended that all proxies are turned off. (In Microsoft® Windows 7: Click Control Panel Internet Options Connections LAN Settings ) 6 Wireless Application Software is required if the Wireless or LAN is used for the Audio Projection set-up. Please down load and install the software the first time you use Audio Projection. If it is already installed, skip Step 6 - 7. NOTE: You only need to install the Wir eless Application Software once. 7 Wireless Application Software download and installation steps refer to Install the Wireless Application Software on page 60.
Using Your Projector77 Launch the Wireless Application 8Once the installation is complete, the program will launch automatically. Or you can double-click the icon or on the desktop to start the application. NOTE: 1If you choose LAN connection mode, click Skip. 2 If you choose wireless connect ion mode, select your projector, and then click OK. Login 9To communicate with your projector, en ter the Login Code (see Step 4), and then click OK. NOTE: If the IP Address is not detected, enter the IP Address displayed at the bottom left corner of the wireless screen. 4220 Log in screen 4320 Log in screen
78Using Your Projector 10You are now logged into the 4220 or 4320 Wireless Application. Press the Play button in the application to starting the LAN or wireless projection. NOTE: You may use the controls to either project in full screen mode or in split screen mode. 11 Press the Audio Projection button in the application to enable Audio Projection function. NOTE: Audio projector function need install ex tra driver, if your computer do not install driver, will pop-up need install driver message on screen. You can download the extra driver from the Dell Support site at support.dell.com. 12 Executing the Windows Media Player or others audio player software (example: Winamp player...) on your computer.
Using Your Projector79 Video Stream Installation Video Stream only supports the Wireless Display and LAN Display source. Minimum system requirements as follow: Operation System: •Windows Microsoft Windows XP™ Home or Professional Service pack 2/3 (32-bit recommended), Windows Vista™ 32-bit, or Windows® 7 Home or Professional 32-bit or 64-bit •MAC MacBook Pro and above, MacOS 10.5 and above Minimum Hardware: a Dual® Core™ 1.4 GHz or greater b64 MB VRAM independent graphics card or more recommended c2 GB DDR SDRAM memory or more recommended dGigabit Ethernet eIntegrated 802.11 b/g/n Wi-Fi Device for a WLAN connection NOTE: If your computer does not meet t he minimum hardware requirements, video stream may have lag. Meet t he recommended system requirements to have optimized performance of the video stream. NOTE: Video Stream Setting steps are the same for the 4220 and 4320 models. Video Stream Support Format File Format Video Format Audio Format MP4 AVC, Mpeg4 visual, H. 263 AAC-LC, MP3, AMR NB MOV AVC, Mpeg4 visual, H.263 AAC-LC, MP3 ASF VC1 WMA
80Using Your Projector Enable Wireless or LAN on the Projector Please refer to steps 1 to 4 of the Audio Projection Installation to enable wireless or LAN feature. Install the Dell Wireless Applic ation Software on Your Computer Please refer to steps 5 to 7 of the Audio Projection Installation to install the Dell Wireless Application Software. Launch the Wireless Application Please refer to steps 8 of the Audio Projection Installation to launching the Wireless Application. Login Please refer to steps 9 of the Audio Projection Installation to log-in the application. 1 You are now logged into the 4220 or 4320 Wireless Application. Click Video Mode button switch to Video Mode screen. 2Click to select the video or music files and starting player.