Dell Precision 5520 Owner's Manual

Dell Precision 5520
Owner

Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
 
Copyright 

Contents1 Working on your computer.............................................................................................................................5
Turning off Your Computer................................................................................................................................\
..............5
Using power buttonUsing charms.............................................................................................................................5
Before working...

Installing the DC-in Adapter Port.............................................................................................................................22
Display Assembly................................................................................................................................\
..............................22
Removing the Display Assembly..............................................................................................................................22
Installing...

Working on your computer
Turning off Your Computer
CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer.
You can turn off your computer in two ways :
1Using the power button
2Using the charms menu
Using power button
1Press and hold the Power button  to turn off the screen.
Using charms
1Swipe from the right edge of the display to access the Charms menu. 
2Touch Settings 

To avoid damaging your computer, perform the following steps before you begin working inside the computer.
1 Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.
2 Turn off your computer.
3 If the computer is connected to a docking device (docked), undock it.
CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from 
the network device.
4 Disconnect all network cables from the computer.
5 Disconnect your...

Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.
Recommended Tools
The procedures in this document may require the following tools:

Installing the Base Cover
1 Place the base cover on the computer and snap it in place.
2 Tighten the ten M2x3 screws to secure the base cover to the computer.
NOTE: Ensure you use a Torx #5 screwdriver for the base screws and a Philips screwdriver for the two M2x8 system 
badge screws.
3 Turn the system badge flap over and snap it in place.
4 Follow the procedures in After Working Inside Your Computer.
Battery
Removing the Battery
1 Follow the procedures in Before Working Inside Your Computer.
2 Remove...

Installing the Battery
1 Place and align the battery in the battery bay.
2 Tighten the seven M2x4 screws that secure the battery to the computer.
3 Connect the battery cable to the system board.
4 Install the base cover.
5 Follow the procedures in After Working Inside Your Computer.
PCIe Solid State Drive (SSD)
Removing the Solid State Drive (SSD)
1 Follow the procedures in Before Working Inside Your Computer
2 Remove the:
aBase cover
bbattery
3 Remove the screw that secures the solid-state drive (SSD)...

Installing the solid-state drive
1 Adhere the thermal pad to the solid-state drive.
NOTE: The thermal pad is applicable only for a PCIe SSD card.
2 Slide the solid-state drive at an angle into the solid-state drive slot.
3 Press the other end of the solid-state drive down and replace the M2 x 3 screw that secures the solid-state drive to the system board.
4 Install the:
abattery
bbase cover
5 Follow the procedures in After Working Inside Your Computer.
Hard drive
Removing the Hard Drive
1 Follow the...