Dell P2411h Users Guide

							 
Notes, Notices, and Cautions  
   
   
   
 
Information in this document is subject to change without notice.  
 
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  Dell  and the  DELL  logo are trademarks of Dell Inc;   Microsoft  and  Windows  are either trademarks or registered trademarks of Microsoft Corporation in 
the United States and/or other countries,  Intel  is a registered trademark of Intel Corporation in the U.S. and other countries; and ATI is a trademark of Advanced Micro Devices, 
Inc.  ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the 
ENERGY STAR guidelines for energy efficiency.  
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own.  
Model P2411Hb.   
 
September 2010 Rev. A00   About Your Monitor  
Setting Up the Monitor  
Operating the Monitor  
Troubleshooting   
Appendix  
NOTE:  A NOTE indicates important information that helps you make better use of your monitor. 
CAUTION:   A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
 
WARNING:  A WARNING indicates a potential for property damage, personal injury or death.  
						

							Back to Contents Page    
 
About Your Monitor   
 
Package Contents    
Your monitor ships with the components shown below. Ensure that you have received all the components and  contact Dell  if something is missing.  Package Contents
Product Features
Identifying Parts and Controls
Monitor Specifications
Plug and Play Capability
Universal Serial Bus (USB) Interface
LCD Monitor Quality and Pixel Policy
Maintenance Guidelines
  NOTE:  Some items may be optional and may not ship with your Monitor. Some features or media may not be available in certain countries.
  NOTE:  To set up with any  other stand, please refer to the respective  stand setup guide for setup instructions.
  l Monitor  
l Stand  
  l Power Cable  
  l VGA Cable    
						

							     
Product Features  
The   flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor 
features include:  
■   P2411H:  609.7 mm (24 - inchyfYLHZDEOHDUHDGLVSOD\0HDVXUHGGLDJRQDOO\\f.  1920 x 1080  resolution, plus full - screen support for lower resolutions.  
■  Wide viewing angle to allow viewing from a sitting or standing position, or moving side - to - side.   
 
■  Tilt, swivel, vertical extension and rotate adjustment capability.   
■  Removable pedestal and Video Electronics Standards Association (VESA™ ) 100 mm mounting holes for flexible mounting solutions.   
■  Plug and play capability if supported by your system.   
 
■  On - Screen Display (OSD) adjustments for ease of set - up and screen optimization.   
 
■  Software and documentation media includes an information file (INF), Image color Matching File (ICM), PowerNap software application and product  
    documentation.     
 
■  Energy Saver feature for Energy Star compliance.   
■  Security lock slot.  
■  Asset Management Capability.   
■  Capability to switch from wide aspect to standard aspect ratio while maintaining the image quality.   
■  EPEAT Gold Rating.  
■  Halogen Reduced (BFR/CFR/PVC Free).  
■  Arsenic - Free glass and Mercury Free for Panel only.  
 
■  High Dynamic Contrast Ratio (2,000,000:1).   
■  0.15W standby power when in sleep mode.  
■  Energy Gauge shows the energy level being consumed by the monitor in real time.  
■  PowerNap Software included (comes in the CD attached with the monitor).  
Identifying Parts and Controls  
Front View     l DVI Cable   
l USB up stream  cable (enables the USB ports on the monitor) 
  l Drivers and Documentation  media   
l Quick Setup Guide    
l Product and Safety Information Guide      
						

							Back View  
 Front View   Front panel controls
Label Description
1 Preset Modes (default, but configurable)
2 Brightness & Contrast (default, but configurable)
3 Menu
4 Exit
5 Power button (with power light indicator)
Back view   Back view with monitor stand  
Label   Description   Use  
1   VESA mounting holes  (100 mm x 100 mm  -  
behind attached  VESA Plate) Wall mount monitor using VESA - compatible wall mount kit (100 mm x 100 mm)   
2   Regulatory label Lists the regulatory approvals.
3   Stand release button  Release stand from monitor. 
4   Security lock slot   Secures monitor with security cable lock   
   
5   Dell Soundbar mounting brackets Attaches the optional Dell Soundbar.
6   Barcode serial number label Refer to this label if you need to contact Dell for technical support.
7   USB downstream ports Connect your USB devices.  
						

							Side View  
Bottom View  
    8   Cable management  slot Use to organize cables by placing them through the slot.
 
   
       Right view  
Bottom view   Bottom view with monitor stand  
Label Description   Use  
1 AC power cord connector Connect the power cable 
2 DC power connector  for Dell Soundbar. Connect the power cord for the soundbar (optional)
3 DVI connector Connect your computer DVI cable 
4 VGA connector Connect your computer VGA cable 
5 USB upstream port Connect the USB cable that came with your monitor to the monitor and the 
computer. Once this cable is connected,  you can use the USB connectors on 
the side and bottom of the monitor.
6 Stand lock feature To lock the Stand to the Monitor
Monitor Specifications  
Flat Panel Specifications  
Model P2411H
Screen type Active matrix  -  TFT LCD
Panel type  TN  
						

							*[P2411H] color gamut (typical) is based on CIE1976 (81% ) and CIE1931 (68%) test standards.  Screen dimensions 609.7 mm (24 inches viewable image size)
Preset display area: 531.36 (H) X 298.89   (V) mm
Horizontal 531.36 mm (20.92 inches)
Vertical 298.89 mm (11.77 inches)
Pixel pitch 0.277 mm
Viewing angle 160° (verticalyfW\S
						

							Video Supported Modes  Horizontal scan range 30 kHz to 83 kHz (automatic)  
Vertical scan range 56 Hz to 75 Hz (automaticyf  
Maximum resolution 1920 x 1080 at 60 Hz  
Model P2411H
Video display capabilities (DVI playback)
480p,  480i,  576p,  576i,  720p,   1080p  and 1080i
Preset Display Modes  
P2411H  
    Display Mode   Horizontal Frequency 
(kHz)   Vertical Frequency 
(Hz)   Pixel Clock 
(MHz)   Sync Polarity 
(Horizontal/Vertical)  
720 x 400 31.5   70.0   28.3   - /+  
640 x 480  31.5   60.0   25.2   - / -  
640 x 480 37.5   75.0   31.5   - / -  
800 x 600 37.9   60.0   40.0   +/+  
800 x 600 46.9   75.0   49.5   +/+  
1024 x 768 48.4   60.0   65.0   - / -  
1024 x 768 60.0   75.0   78.8   +/+  
1152 x 864 67.5   75.0   108.0   +/+  
1280 x 1024 64.0   60.0   108.0   +/+  
1280 x 1024 80.0   75.0   135.0   +/+  
1920 x 1080 67.5   60.0   148.5   +/+    
						

							Electrical  Specifications  
Model P2411H
Video input signals Analog RGB, 0.7 Volts +/ - 5%, positive polarity at 75 ohm input impedance  
Digital DVI - D TMDS, 600mV for each differential line, positive polarity at 50 ohm input 
impedance
Synchronization input signals Separate horizontal and vertical synchronizations, polarity - free TTL level, SOG 
(Composite SYNC on green)
AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz  +  3 Hz/1.5 A (Max.)
Inrush current 120V:30A (Max.)  
240V:60A (Max.) 
Physical  Characteristics  
Model P2411H
Connector type 15 - pin D - subminiature, blue connector; DVI - D, white connector
Signal cable type Digital: Detachable, DVI - D, Solid pins, shipped detached from the monitor 
Analog: Detachable, D - Sub, 15 pins, shipped attached to the monitor  
Dimensions (with stand)
Height (extended) 
478.3 mm ( 18.83 inches)
Height (compressed)
378.3 mm ( 14.89 inches)
Width
569.8 mm (22.43 inches)
Depth
184.1 mm (7.25 inches)
Dimensions (without stand)
Height 
337.3 mm (13.28 inches)
Width
569.8 mm (22.43 inches)
Depth
61.5 mm (2.42 inches)
Stand dimensions
Height (extended) 
370.5 mm (14.59 inches)
Height (compressed)
331.3 mm (13.04 inches)
Width
279.9 mm (11.02 inches) 
Depth
184.1 mm (7.25 inches)
Weight
Weight with packaging
7.3 kg (16.09 lbs)    
						

							Weight with stand assembly and cables
5.8 kg (12.79 lbs)  
Weight without stand assembly  
(For wall mount or VESA mount considerations  -   no cables)
3.7 kg (8.16 lbs)  
Weight of stand assembly 1.92 kg (4.23 lbs) 
Environmental  Characteristics  
Model P2411H
Temperature
Operating 0° to 40 ° C 
Non - operating Storage:  - 20° to 60°C ( - 4° to 140°Fyf  
Shipping:  - 20° to 60°C ( - 4° to 140°Fyf
Humidity
Operating 10% to 80% (non - condensing)  
						

							    Non - operating Storage: 5% to 90% (non - condensing)  
Shipping: 5% to 90% (non - condensing)
Altitude
Operating 4,850 m (15,902 ft) max
Non - operating 12,192 m (40,000 ft) max
Thermal dissipation 170.72 BTU/hour (maximum)  
92.19 BTU/hour (typical)
Power Management Modes  
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is 
referred to as  Power Save Mode *. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The 
following table shows the power consumption and signaling of this automatic power saving feature:   
P2411H  
The OSD will only function in the normal operation mode. When any button is pressed in Active - off mode, one of the following messages will be displayed:   
 
Activate the computer and the monitor to gain access to the  OSD.  VESA Modes Horizontal Sync Vertical Sync  Video Power Indicator Power Consumption
Normal operation Active Active Active  Blue 27 W (typical)/50 W (maximum)**
Active - off mode Inactive Inactive Blanked Amber Less than 0.15 W
Switch off - - - Off Less than 0.15 W