Dell P2310h Users Guide

s  
l Standard : Loads the monitors default color settings. This is the default preset mode.   
l Multimedia : Loads color settings ideal for multimedia applications.   
l Game : Loads color settings ideal for most gaming applications.   
l Warm : Increase the color temperature. The screen appears warmer with a red/yellow tint.   
l Cool : Decreases the color temperature. The screen appears cooler with a blue tint.   
l Custom (R, G, B) : Allows you to manually adjust the color settings. Press the   and...

  Display 
Settings   Use the Display Settings to adjust image.   
   
  Wide Mode  Adjust the image ratio as 4:3 or full screen.
   Horizontal P
osition  
Use  the   or   to adjust image left or right. Minimum is 0 ( - ). Maximum is 100 (+). 
   Vertical Pos
ition    
Use  the   or    to adjust image up or down. Minimum is 0 ( - ). Maximum is 100 (+). 
   Sharpness  
This feature can make the image look sharper or softer. Use   or   to adjust the sharpness from 0 to 100.  
   Pixel Clock  
T he Phase...

 
OSD Warning Messages      
  LCD 
Conditioning Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. 
You can enable this feature by selecting Enable.  
 
  Factory Res
et   Reset all OSD settings to the factory preset values. 
Personalize   User can select from Preset Modes, Brightness/Contrast, Auto Adjust, Input Source, Energy Modes and set as shortcut key.  
 
NOTE:  This monitor has a built - in feature to automatically...

See  Solving Problems  for more information.  
Setting the Maximum Resolution  
To set the  Maximum  resolution for the monitor:  
1. Right - click on the desktop and select  Properties .   
2. Select the  Settings  tab.   
3. Set the screen resolution to 1920 x 1080.   
4. Click  OK .   
If you do not see 1920 x 1080 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following 
procedures:  
l If you have a Dell desktop or portable computer: 
Go to...

Using the Dell Soundbar (Optional)  
The Dell Soundbar is a stereo two channel system adaptable to mount on Dell Flat Panel Displays.  The Soundbar has a rotary volume and on/off control to 
adjust the overall system level, a blue LED for power indication, and two audio headset jacks.  
 
   
Using the Tilt, Swivel, and Vertical Extension  
Tilt , Swivel  
With the built - in pedestal, you can tilt the monitor for the most comfortable viewing angle.  
 1.   Power/Volume control
2.   Attach mechanism...

Vertical Extension  
 
   
       
Rotating the Monitor  
Before you rotate the monitor, your monitor should be fully vertically extended ( Vertical Extension ) and fully tilted ( Tilt ) up to avoid hitting the bottom edge of 
the monitor.  
     NOTE:  The stand is detached and extended when the monitor is shipped from the factory.
NOTE:   The stand extends vertically up to 100 mm. The figures below illustrate how to extend the stand vertically.   

 
 
Adjusting the Rotation Display Settings of Your System  
After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of Your System.  
To adjust the Rotation Display Settings:  
1. Right - click on the desktop and click  Properties .   
2. Select the  Settings  tab and click  Advanced .   
3. If you have an ATI graphics card, select the  Rotation  tab and set the preferred rotation.  
If you have an nVidia graphics card, click the  nVidia...

Back to Contents Page   
Setting Up Your Monitor   
 
 
Setting the display resolution to  1920 x1080 ( maximum)  
For optimal display performance while using the Microsoft Windows operating systems, set the display resolution to 1920x1080 pixels by performing the 
following steps:  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Move the slider - bar to the right by pressing and holding left - mouse button and adjust the screen resolution to  1920 x1080  ....

 
Information in this document is subject to change without notice.  
   
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.  
Trademarks used in this text:  Dell  and the  DELL  logo are trademarks of Dell Inc;  Microsoft  and  Windows  are either trademarks or registered trademarks of 
Microsoft Corporation in the United States and/or other countries;  ENERGY STAR  is a registered trademark of the U.S. Environmental Protection...

Back to Contents Page    
 
Setting Up the Monitor   
 
   Attaching the Stand  
   Connecting the Monitor  
   Organizing Your Cables  
   Attaching the Soundbar (optional)  
   Removing the Stand    
   Wall Mounting (Optional)  
Attaching the Stand  
 
 
To attach the monitor stand:  
1. Remove the cover and place the monitor on it.   
2. Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.   
3. Press the stand till it snaps into its place.   
Connecting Your...