Dell P170s Users Guide

							Dell P170S/P190S Flat Panel Monitor Users Guide
file:///S|/SSA_Proposal/P170S_P190S/UG/about.htm[7/8/2011 4:49:51 PM]
USB
connectors
(downstream)
 Right side  Left  side
 
Bottom View
 
 
Bottom  view
 Label Description
1 Power connector Insert the power cable.
2 Dell Soundbar power connector Connect the power cord  for the Soundbar (optional).
3 DVI connector Connect your  computer  DVI cable.
4 VGA connector Connect your  computer  VGA cable.
 
						

							Dell P170S/P190S Flat Panel Monitor Users Guide
file:///S|/SSA_Proposal/P170S_P190S/UG/about.htm[7/8/2011 4:49:51 PM]
Connect the USB  cable  that  came  with your  monitor to  the monitor and  the computer. Once this
5 USB  upstream  connector
cable  is connected you can  use the USB  connectors on the side  and  bottom  of the monitor.  
6 USB  connector Connect your  USB  devices.
 
Monitor Specifications
Power Management Modes
If  you have  VESAs DPMS™ compliance display  card  or software installed  in your  computer, the monitor can  autom
referred to  as Power Save Mode. If  input from  a  keyboard,  mouse or other input devices is detected  by the comput
shows  the power consumption  and  signaling of this automatic power-saving feature: 
P170S
VESA  Modes HorizontalVertical Sync Video Power Power Consumption
Sync Indicator
Normal operation ActiveActive Active Green 50  W (maximum)
22  W (typical)
Active-off mode Inactive Inactive Blanked Amber Less  than  1 W
Switch off --- Off Less  than  1 W
P190S VESA  Modes HorizontalVertical Sync Video Power Power Consumption
Sync Indicator
Normal operation ActiveActive Active Green 53  W (maximum)
25  W (typical)
Active-off mode Inactive Inactive Blanked Amber Less  than  1 W
Switch off --- Off Less  than  1 Watically reduce its  power consumption  when  not in use.  This is
er, the monitor will automatically wake up. The  following table
 
NOTE: This monitor is ENERGY  STAR® -compliant as well as TCO  03 power management
compatible.
NOTE:  Zero power consumption  in OFF  mode can  only  be achieved  by disconnecting  the main cable  from  the
onitor.
m
Pin Assignments
VGA Connector
Pin Number 15 -pin  Side of  the Connected Signal
Cable
1 Video-Red  
2 Video-Green
3 Video-Blue
4 GND
5 Self-test
6 GND-R
7 GND-G
8 GND-B
 
						

							Dell P170S/P190S Flat Panel Monitor Users Guide
file:///S|/SSA_Proposal/P170S_P190S/UG/about.htm[7/8/2011 4:49:51 PM]
9Computer 5V/3.3V
10 GND-sync
11 GND
12 DDC data
13 H -sync
14 V -sync
15 DDC clock
DVI Connector
Pin
Number24
-pin  Side of  th e Connected  Signal
Cable
1 TMDS RX2 -
2 TMDS RX2+
3 TMDS Ground
4 Floating
5 Floating
6 DDC Clock
7 DDC Data
8 Floating
9 TMDS RX1 -
10 TMDS RX1+
11 TMDS Ground
12 Floating
13 Floating
14 +5V/+3.3V power
15 Self test
 
16Hot  Plug Detect
17 TMDS RX0 -
18 TMDS RX0+
19 TMDS Ground
20 Floating
21 Floating
22 TMDS Ground
23 TMDS Clock+
24 TMDS 

Clock -
 
Universal Serial Bus (USB)  Interface
This monitor supports  High -Speed Certified USB  2.0 interface.
 Data Rate Power Consumption
High  speed 480 Mbps
 2.5W (Max., each  port)
Full  speed 12  Mbps
 2.5W (Max., each  port)
Low speed 1.5 Mbps
 2.5W (Max., each  port)
 
						

							Dell P170S/P190S Flat Panel Monitor Users Guide
file:///S|/SSA_Proposal/P170S_P190S/UG/about.htm[7/8/2011 4:49:51 PM]
USB ports:
1 upstream  - rear4 downstream  - 2 on rear; 2 on left side
NOTE: USB  2.0 capability  requires  2.0-capable  computer. 
NOTE : The  USB  interface of the monitor works ONLY when  monitor is powered ON (or in Power Save Mode). Switching  your  monitor OFF  and  then  ON would re -enumerate  its
USB  interface;  attached  peripherals  may take  a  few  seconds  to  resume normal  functionality.
Flat Panel Specifications
Model P170SP190S
Screen type Active matrix  - TFT LCDActive matrix  - TFT LCD
Panel type TNTN
Screen dimensions 17 inches  (17-inch diagonal viewable image size) 19 inches  (19-inch diagonal viewable image size)
Preset display  area:
Horizontal
Vertical
 
337.9 mm  (13.3 inches)
270.3 mm  (10.6 inches)
 
376.3 mm  (14.8  inches)
301.1 mm  (11.8 inches)
Pixel  pitch 0.264 mm0.294 mm
Viewing angle 160° (vertical)  typical, 

170° (horizontal) typical 160° (vertical)  typical, 170° (horizontal) typical
Luminance  output 250 CD/m²  (typical)250 CD/m²  (typical)
Contrast  ratio 800 to  1 (typical) 800 to  1 (typical)
Faceplate  coating Antiglare  with hard-coating 3HAntiglare  with hard-coating 3H
Backlight 2 CCFLs backlight2 CCFLs backlight
Response Time 5 ms typical5 ms typical
Color  Depth 16.7  mil  colors16.7  mil  colors
Color  Gamut 72  %*72  %*
* P170S/P190S  Color  Gamut (Typical) is based on CIE1976 (85%)  and  CIE1931 (72%).
Resolution
Model P170S/P190S
Horizontal  scan  range 30  kHz to  81  kHz (automatic)
Vertical  scan  range 56
 Hz  to  76  Hz  (automatic)
Maximum preset resolution 1280 x  1024 at 60

 Hz
 
Preset Display Modes
P170S/P190SDisplay Mode Horizontal Frequency (kHz)Vertical Frequency
(Hz) Pixel Clock
(MHz) Sync Polarity
(Horizontal/Vertical)
VGA,  720 x  400 31.570.128.3 -/+
VGA,  640 x  480 31.560.025.2 -/-
VESA, 640 x  480 37.575.031.5 -/-
VESA, 800 x  600 37.960.340.0 +/+
VESA, 800 x  600 46.975.049.5 +/+
VESA, 1024 x  768 48.460.065.0 -/-
VESA, 1024 x  768 60.075.078.8 +/+
VESA, 1152 x  864 67.575.0108.0 +/+
VESA, 1280 x  1024 64.060.0108.0 +/+
VESA, 1280 x  1024 80.075.0135.0 +/+
 
Electrical
Model P170S/P190S
 
						

							Dell P170S/P190S Flat Panel Monitor Users Guide
file:///S|/SSA_Proposal/P170S_P190S/UG/about.htm[7/8/2011 4:49:51 PM]
Video input signals
Analog  RGB,  0.7 Volts +/ - 5%, 75  ohm input impedance 
Digital DVI-D  TMDS,  600mV for each  differential line, positive
polarity at 50  ohm input impedance
Synchronization input signals separate  horizontal and  vertical,
3.3V Cmos or 5V TTL level,  positive or negative sync.
AC input voltage/frequency/current 100 to  240 VAC / 50 -60  Hz  +
 3 Hz  / 1.5 A  Max.
Inrush  iso surge current 120 V: 30  A  (Max.)
240 V: 60  A  (Max.)
 
Physical Characteristics
Model
P170SP190S
Connector type
D -sub: blue connector
DVI-D: white connector
D -sub: blue connector
DVI-D: white connector
Signal cable type
D -sub: Detachable, Analog, 15
pin, shipped attached  to  the
monitor
Digital: Detachable, DVI-D,
Solid pins, shipped detached
from  the monitor
D -sub: Detachable, Analog, 15   pin,
shipped attached  to  the monitor
Digital: Detachable, DVI-D, Solid pins,
shipped detached  from  the monitor
Dimensions (with  stand)
Height  (Compressed) 332.16 mm  (13.08  inches)
 362.6 mm  (14.26  inches) 
Height  (Extended)462.16 mm  (18.20  inches) 492.6 mm  (19.39  inches) 
Width372.10 mm  (14.65  inches) 410.1 mm(16.15 inches) 
Depth182.25 mm  (7.18 inches) 182.0 mm  (7.17 inches) 
Dimensions (without stand)
Height
 309.25 mm  (12.18  inches)  338.1 mm  (13.31  inches)  
Width372.10 mm  (14.65  inches) 410.1 mm  (16.15  inches) 
Depth59.20 mm  (2.33 inches) 65.9  mm  (2.59 inches) 
Stand dimensions
Height  (Compressed)331.70 mm  (13.06  inches)
 347.7 mm  (13.69  inches) 
Height  (Extended)381.57 mm  (15.02  inches) 396.7 mm  (15.62  inches) 
Width337.20 mm  (13.28  inches) 337.6 mm  (13.29  inches) 
Depth182.30 mm  (7.18 inches)  182.0 mm  (7.17 inches)  
Weight
Weight  with packaging6.50  kg (14.30  lb)7.6 kg (16.70  lb)
Weight  with 

stand  assembly and  cables 5.10  kg (11.22  lb)6.4 kg (14.08  lb)  
 
Weight  without  stand  assembly
(for wall mount or VESA  mount considerations 

- no cables) 3.65  kg (8.03 lb)
 4.3 kg (9.46 lb) 
Weight  of stand  assembly
1.55  kg (3.42 lb) 1.6 kg (3.52 lb) 
 
Environmental
Model P170S P190S
Temperature
   
Operating0°  to  40° C  (32°  to  104°F) 0°  to  40° C  

(30°  to  104°F)
Non-operating Storage: -20° to  60° C  (-4°  to  140° F)
Shipping: -20° to  60° C  (-4°  to  140° F) Storage: -20° to  60° C  (-4°  to  140° F)
Shipping: -20° to  60° C  (-4°  to  140° F)
 
						

							Dell P170S/P190S Flat Panel Monitor Users Guide
file:///S|/SSA_Proposal/P170S_P190S/UG/about.htm[7/8/2011 4:49:51 PM]
Humidity   
Operating10%  to  80%  (non-condensing) 10%  to  80%  (non-condensing)
Non-operating Storage: 5% to  90%  (non-condensing)
Shipping: 5% to  90%  (non-condensing) Storage: 5% to  90%  (non-condensing)
Shipping: 5% to  90%  (non-condensing)
Altitude
   
Operating3,048 m (12,000 ft) max 3,048 m (12,000 ft) max
Non-operating 9,144 

m (40,000 ft) max9,144 m (40,000 ft) max
Thermal dissipation 171.00 BTU/hour (maximum)
75.24 BTU/hour (typical) 181.26 BTU/hour (maximum)
85.50 BTU/hour (typical)
 
Plug and Play Capability
You  can  install the monitor in any Plug and  Play-compatible system. The  monitor automatically provides  the computer  system  with its  Extended  Display Identification  Data (EDID)
using  Display Data Channel (DDC) protocols so that  the system  can  configure itself and  optimize  the monitor settings. If  required, the user  can  select different settings, but in most
cases  monitor installation is automatic.
LCD Monitor Quality & Pixel Policy
During  the LCD  Monitor manufacturing process,  it  is not uncommon for one  or more  pixels to  become fixed  in an unchanging state  which are hard to  see and  do not affect the
display  quality or usability. For  more  information, see Dell Support site at:  
support.dell.com.
Maintenance Guidelines
Caring for Your  Monitor
WARNING: Read and follow the  Safety Instructions before cleaning the
monitor. 
WARNING:  Before  cleaning the monitor, unplug the monitor  from the
electrical outlet. 
Fo r  best practices,  follow  the instructions in the list below  

while  unpacking, cleaning,  or handling your  monitor:
To clean your  antistatic  screen, lightly dampen a  soft, clean cloth  with water. If  possible, use a  special screen-cleaning tissue  or solution  suitable for the antistatic  coating.  Do
not use benzene, thinner, ammonia,  abrasive cleaners, or compressed  air.
Use  a  lightly-dampened, warm cloth  to  clean the monitor.  Avoid  using  detergent of any kind as some  detergents leave a  milky film on the monitor. If  you notice  a  white powder  when  you unpack  your  monitor,  wipe it  off with a  cloth.Handle your  monitor with care as dark-colored monitors  may scratch and  show white scuff marks  more  than  lighter-colored monitors.  To help maintain the best image quality on your  monitor,  use a  dynamically changing screen saver and  turn  off your  monitor when  not in use.
Back to  Contents Page
 
 
						

							Dell P170S/P190S Flat Panel Monitor Users Guide
file:///S|/SSA_Proposal/P170S_P190S/UG/appendx.htm[7/8/2011 4:50:04 PM]
Back to  Contents Page
Appendix
Dell™ P170S/P190S Flat Panel Monitor  Users Guide
  Safety Instructions
  FCC Notice (U.S.  Only) and  Other  Regulatory  Information
  Contacting Dell
 
CAUTION: Safety Instructions
WARNING: Use of  controls,  adjustments, or  procedures other  than those  specified  in this  documentation
may result  in exposure  to shock,  electrical hazards, and/or mechanical  hazards.
For  information  on safety instructions,  see the  Safety Information that  ships with your  monitor.
FCC Notice (U.S. Only) and Other Regulatory Information
For  FCC notices and  other regulatory  information, see the regulatory  compliance website located  at
www.dell.com
egulatory_compliance
.
Contacting Dell
For  customers  in the United  States, call  800-WWW-DELL (800 -999-3355).
NOTE: If  you do not have  an active Internet  connection, you can  find contact  information  on your  purchase invoice,
packing slip, bill, or Dell product catalog.
Dell  provides several online and telephone -based support  and service options. Availability  varies by  country and
product,  and some  services  may not  be  available in your area.  To contact Dell  for  sales, technical support, or
customer  service issues: 1.  Visit  support.dell.com .
2 .  Verify  your  country or region in the  Choose A  Country/Region  drop -down  menu  at the bottom  of the page.
3 .  Click   Contact Us on the left  side  of the page.
4 .  Select the appropriate service  or support link  based on your  need.
5 .  Choose the method of contacting Dell that  is convenient for you.
Back

 to  Contents Page