Dell N7110 Service Manual

Thermal Cooling Assembly81
20
Thermal Cooling Assembly
 WARNING: Before working inside your computer, read the safety information 
that shipped with your computer. For additional safety best practices information, 
see the Regulatory Compliance Homepage at 
www.dell.com/regulatory_compliance.
 
CAUTION: Only a certified service technician should perform repairs on your 
computer. Damage due to servicing that is not authorized by Dell is not covered by 
your warranty.
 
CAUTION: To avoid electrostatic...

82Thermal Cooling Assembly
Replacing the Thermal Cooling Assembly
1Follow the instructions in Before You Begin on page 9.
2Place the thermal cooling assembly on the system board.
3Align the six captive screws on the thermal cooling assembly with the 
screw holes on the system board and tighten the screws in sequential order 
(indicated on the thermal cooling assembly).
4Follow the instructions from step 5 to step 18 in Replacing the System 
Board on page 72.
 CAUTION: Before turning on the computer,...

Thermal Cooling Assembly83
book.book  Page 83  Friday, April 13, 2012  2:02 PM 

84Thermal Cooling Assembly
book.book  Page 84  Friday, April 13, 2012  2:02 PM 

Processor Module85
21
Processor Module
 WARNING: Before working inside your computer, read the safety information 
that shipped with your computer. For additional safety best practices information, 
see the Regulatory Compliance Homepage at 
www.dell.com/regulatory_compliance.
 
CAUTION: Only a certified service technician should perform repairs on your 
computer. Damage due to servicing that is not authorized by Dell is not covered by 
your warranty.
 
CAUTION: To avoid electrostatic discharge, ground...

86Processor Module
 CAUTION: To ensure maximum cooling for the processor, do not touch the heat 
transfer areas on the processor thermal-cooling assembly. The oils in your skin 
can reduce the heat transfer capability of the thermal pads.
 CAUTION: When removing the processor module, pull the module straight up. Be 
careful not to bend the pins on the processor module.
5Lift the processor module from the ZIF socket.
Replacing the Processor Module
1Follow the instructions in Before You Begin on page 9.
1...

Processor Module87
 NOTE: If a new processor is installed, you will receive a new thermal-cooling 
assembly, which will include an affixed thermal pad, or you will receive a new 
thermal pad along with documentation to illustrate proper installation.
2Align the pin-1 corner of the processor module with the pin-1 corner of the 
ZIF socket, then insert the processor module.
 NOTE: The pin-1 corner of the processor module has a triangle that aligns with the 
triangle on the pin-1 corner of the ZIF socket....

88Processor Module
book.book  Page 88  Friday, April 13, 2012  2:02 PM 

Display89
22
Display 
 WARNING: Before working inside your computer, read the safety information 
that shipped with your computer. For additional safety best practices information, 
see the Regulatory Compliance Homepage at 
www.dell.com/regulatory_compliance.
 
CAUTION: Only a certified service technician should perform repairs on your 
computer. Damage due to servicing that is not authorized by Dell is not covered by 
your warranty.
 
CAUTION: To avoid electrostatic discharge, ground yourself by using...

90Display
5Remove the keyboard (see Removing the Keyboard on page 27).
6Remove the palm-rest assembly (see Removing the Palm-Rest Assembly 
on page 31).
7Disconnect the display cable and camera cable from the connectors on the 
system board.
8Disconnect the Mini-Card antenna cables from the connectors on the 
Mini-Card(s) (see Removing the Mini-Card(s) on page 45).
9Note the routing of display cable, camera cable, and Mini-Card antenna 
cables and remove the cables from the routing guides.
10Remove the...