Home > Dell > Projector > Dell M209X Projector Users Guide

Dell M209X Projector Users Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Dell M209X Projector Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Contacting Dell41
    Contacting Dell
    For customers in the United States, call 800-WWW-DELL (800-999-3355). 
     NOTE: If you do not have an active Internet connection, you can find contact 
    information on your purchase invoice, packing slip, bill, or Dell product catalog. 
    Dell provides several online and telephone-based support and service options. 
    Availability varies by country and product, and some services may not be 
    available in your area. To contact Dell for sales, technical support, or 
    customer service issues:
    1
    Visit support.dell.com.
    2Verify your country or region in the Choose A Country/Region drop-down 
    menu at the bottom of the page. 
    3Click Contact Us on the left side of the page.
    4Select the appropriate service or support link based on your need.
    5Choose the method of contacting Dell that is convenient for you. 
    						
    							Glossary43
    Appendix: Glossary
    ANSI Lumens —A standard for measuring light output, used for comparing 
    projectors. A standard for measuring the brightness. It is calculated by dividing a 
    square meter image into nine equal rectangles, measuring the lux (or brightness) 
    reading at the center of each rectangle, and averaging these nine points.
    Aspect Ratio —The most popular aspect ratio is 4:3 (4 by 3). Early television and 
    computer video formats are in a 4:3 aspect ratio, which means that the width of 
    the image is 4/3 times the height.
    Brightness— The amount of light emitting from a display or projection display or 
    projection device. The brightness of projector is measured by ANSI lumens.
    Color Temperature— The color appearance of white light.  Low color 
    temperature implies warmer (more yellow/red) light while high color temperature 
    implies a colder (more blue) light.  The standard unit for color temperature is 
    Kelvin (K).
    Component Video—A method of delivering quality video in a format that 
    contains all the components of the original image. Consists of the luminance 
    signal and two separate chrominance signals and are defined as YPbPr for analog 
    component and YCbCr for digital component. Component video is available on    
    DVD players and projectors.
    Composite Video — A video signal that combines the luma (brightness), chroma 
    (color), burst (color reference), and sync (horizontal and vertical synchronizing 
    signals) into a signal waveform carried on a single wire pair. There are three kind of 
    formats, namely, NTSC, PAL and SECAM.
    Compressed Resolution— If the input images are of greater resolution than the 
    native resolution of the projector, the resulting image will be scaled to fit the 
    native resolution of the projector.  The nature of compression in a digital device 
    means that some image content is lost.
    Contrast Ratio— Range of light and dark values in a picture, or the ratio between 
    their maximum and minimum values. There are two methods used by the 
    projection industry to measure the ratio:
    1Full  On/Off — measures the ratio of the light output of an all white image (full 
    on) and the light output of an all black (full off) image. 
    2ANSI — measures a pattern of 16 alternating black and white rectangles. The 
    average light output from the white rectangles is divided by the average light 
    output of the black rectangles to determine the 
    ANSI contrast ratio. 
    Full On/Off contrast is always a larger number than ANSI contrast for the same 
    projector. 
    						
    							44Glossary
    dB— decibel—A unit used to express relative difference in power or intensity, 
    usually between two acoustic or electric signals, equal to ten times the common 
    logarithm of the ratio of the two levels. 
    Diagonal Screen— A method of measuring the size of a screen or a projected 
    image. It measures from one corner to the opposite corner. A 9FT high, 12FT 
    wide, screen has a diagonal of 15FT. This document assumes that the diagonal 
    dimensions are for the traditional 4:3 ratio of a computer image as per the example 
    above. 
    DLP
    ®— Digital Light Processing™—Reflective display technology developed by 
    Texas Instruments, using small manipulated mirrors. Light passes through a color 
    filter is sent to the DLP mirrors which arrange the RGB colors into a picture 
    projected onto screen, also known as DMD.
    DMD— digital Micro- Mirror Device— Each DMD consists of thousands of 
    tilting, microscopic aluminum alloy mirrors mounted on a hidden yoke.  
    Focal Length— The distance from the surface of a lens to its focal point.
    Frequency— It is the rate of repetition in cycles per seconds of electrical signals. 
    Measured in Hz. 
    HDMI— High Definition Multimedia Interface, carry both uncompressed high 
    definition video along with digital audio and device control data in a single 
    connector. 
    Hz — Hertz, unit of frequency.
    Keystone Correction— Device that will correct an image of the distortion 
    (usually a wide-top narrow-bottom effect) of a projected image caused by 
    improper projector to screen angle.
    Laser pointer— A small pen or cigar sized pointer that contains small battery 
    powered laser, which can project small, red (typically), highly intensity beam of 
    light that is immediately very visible on the screen
    Maximum Distance— The distance from a screen the projector can be to cast an 
    image that is useable (bright enough) in a fully darkened room. 
    Maximum Image Size— The largest image a projector can throw in a darkened 
    room. This is usually limited by focal range of the optics. 
    Minimum Distance— The closest position that a projector can focus an image 
    onto a screen.
    NTSC— National Television Standards Committee.  North American standard for 
    video and broadcasting, with a video format of 525 lines at 30 frames per second.
    PAL— Phase Alternating Line.  A European broadcast standard for video and 
    broadcasting, with a video format of 625 lines at 25 frames per second. 
    						
    							Glossary45
    Reverse Image— Feature that allows you to flip the image horizontally. When 
    used in a normal forward projection environment text, graphics, etc, are 
    backwards. Reverse image is used for rear projection.
    RGB— Red, Green, Blue— typically used to describe a monitor that requires 
    separate signals for each of the three colors.
    S-Video—A video transmission standard that uses a 4-pin mini-DIN connector to 
    send video information on two signal wires called luminance (brightness, Y) and 
    chrominance (color, C). S-Video is also referred to as Y/C.
    SECAM— A French and international broadcast standard for video and 
    broadcasting, closely related to PAL but with a different method of sending color 
    information.
    SVGA— Super Video Graphics Array— 800 x 600 pixels count.
    SXGA— Super Extended Graphics Array—1280 x 1024 pixels count.
    UXGA— Ultra Extended Graphics Array—1600 x 1200 pixels count.
    VGA— Video Graphics Array—640 x 480 pixels count.
    XGA— Extended Video Graphics Array— 1024 x 768 pixels count.
    Zoom Lens— Lens with a variable focal length that allows operator to move the 
    view in or out making the image smaller or larger. 
    Zoom Lens Ratio— Is the ratio between the smallest and largest image a lens can 
    projector from a fixed distance. For example, a 1.4:1 zoom lens ratio means that a 
    10 foot image without zoom would be a 14 foot image with full zoom.  
    						
    							Index47
    Index
    A
    Adjusting the Projected Image 14
    Adjusting the Projector Height
     
    14
    lower the projector
    Elevator button
     14
    Elevator foot
     14
    Tilt adjustment wheel
     15
    Adjusting the Projector Zoom and 
    Focus
     15
    Focus ring
     15
    Zoom tab
     15
    C
    Changing the Lamp 35
    Connecting the Projector
    Composite video cable
     10
    Connecting with a Component 
    Cable
     11
    Connecting with a Composite 
    Cable
     10
    Connecting with an HDMI Ca-
    ble
     12
    Connecting with an S-video Ca-
    ble
     9
    D-sub to D-sub cable
     8
    D-sub to YPbPr cable
     11
    HDMI cable
     12
    Power cord
     8, 9, 10, 11, 12
    S-video cable
     9To Computer
     8
    USB to USB cable
     8
    Connection Ports
    Audio input connector
     7
    Audio output connector
     7
    HDMI input connector
     7
    Kensington lock hole
     7
    Power cord connector
     7
    S-video input connector
     7
    USB remote connector
     7
    VGA in (D-sub) connector
     7
    Video input connector
     7
    Contact Dell
     5, 17, 18
    contacting Dell
     41
    Control Panel
     17
    D
    Dell
    contacting
     41
    G
    Guiding 34
    M
    Main Unit 6
    Control panel
     6 
    						
    							48Index
    Elevator button 6
    Focus ring
     6
    IR receiver
     6
    Lens
     6
    Zoom tab
     6
    O
    On-Screen Display 20
    Auto-Adjust
     21
    DISPLAY (in PC Mode)
     24
    DISPLAY (in Video Mode)
     25
    Input Select
     21
    LAMP
     25
    LANGUAGE
     26
    Main Menu
     21
    Other
     27
    PICTURE (in PC Mode)
     22
    PICTURE (in Video Mode)
     23
    Set Up
     22
    P
    phone numbers 41
    Powering On/Off the Projector
    Powering Off the Projector
     13
    Powering On the Projector
     13
    R
    Remote Control 19
    S
    Specifications
    Audio
     38
    Brightness
     37
    Color Wheel Speed
     37
    Compatibility Modes
     39
    Contrast Ratio
     37
    Dimensions
     38
    Displayable Color
     37
    Environmental
     38
    I/O Connectors
     38
    Lamp
     37
    Light Valve
     37
    Noise Level
     38
    Number of Pixels
     37
    Power Consumption
     37
    Power Supply
     37
    Projection Distance
     37
    Projection Lens
     37
    Projection Screen Size
     37
    Regulatory
     38
    Uniformity
     37
    Video Compatibility
     37
    Weight
     38
    support
    contacting Dell
     41
    T
    telephone numbers 41
    Troubleshooting
     31
    Contact Dell
     31 
    						
    							Xenon/Granit User Guide29
    Keyboard Countries (Continued)
    SCS
    Serbia (Cyrillic)
    Serbia (Latin)
    Slovakia
    Slovakia (QWERTY)
    Slovakia (QWERTZ)
    Slovenia
    Spain
    Spanish variation
    Sweden
    Switzerland (French)
    Switzerland (German) 
    						
    							30Xenon/Granit User Guide
    Keyboard Style
    This programs keyboard styles, such as Caps Lock and Shift Lock. If you have used 
    Keyboard Conversion settings, they will override any of the following Keyboard 
    Style settings. Default = Regular.
    Keyboard Countries (Continued)
    Tatar
    Turkey F
    Turkey Q
    Ukrainian
    United Kingdom
    United States (Dvorak)
    United States (Dvorak left)
    United Stated (Dvorak 
    United States (International)
    Uzbek (Cyrillic) 
    						
    All Dell manuals Comments (0)

    Related Manuals for Dell M209X Projector Users Guide