Home > Dell > Projector > Dell M209X Projector Users Guide

Dell M209X Projector Users Guide

Here you can view all the pages of manual Dell M209X Projector Users Guide. The Dell manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 11

Connecting Your Projector11
Connecting a DVD Player with a Component Cable
 NOTE: The D-sub to YPbPr cable is not provided by Dell. 1Po w e r  c o rd
2D-sub to YPbPr cable
1
2 

Page 12

12Connecting Your Projector
Connecting a DVD Player with an HDMI Cable
 NOTE: The HDMI cable is not provided by Dell. 1Po w e r  c o rd
2HDMI cable
2 1 

Page 13

Using Your Projector13
3
Using Your Projector
Turning Your Projector On
 NOTE: Turn on the projector before you turn on the source. The Power button 
light blinks blue until pressed.
1Remove the lens cap.
2Connect the power cord and appropriate signal cables. For information about 
connecting the projector, see Connecting Your Projector on page 7. 
3Press the Po w e r button  (see Using the Control Panel on page 17 to locate the 
Po w e r button  ).
4Turn on your source (computer, DVD player, etc.). The...

Page 14

14Using Your Projector
4Disconnect the power cord from the electrical outlet and the projector.
 NOTE: If you press the Power button  while the projector is running, the 
Press Power Button To Turn Off Projector message appears on the screen. To 
clear the message, press a button on the control panel. The message disappears after 
5 seconds. 
Adjusting the Projected Image 
Raising the Projector Height 
1Press the elevator button.
2Raise the projector to the desired display angle, and then release the...

Page 15

Using Your Projector15
Adjusting the Projector Zoom and Focus 
 CAUTION: To avoid damaging the projector, ensure that the zoom lens and 
elevator foot are fully retracted before moving the projector or placing the 
projector in its carrying case.
1Rotate the zoom tab to zoom in and out.
2Rotate the focus ring until the image is clear. The projector focuses at distances 
from 3.3 ft to 39.4 ft (1.0 m to 12 m).
3Tilt adjustment wheel
1Zoom tab
2Fo c u s  r i n g
2
1 

Page 16

16Using Your Projector
Adjusting Projection Image Size
275.3
(699.3cm)
206.5
(524.5cm)
160.6
(407.9cm)
114.7
(291.4cm)
68.8
(174.8cm)
22.89 
(58.3cm)
302.8(769.2cm)
227.1(576.9cm)
176.7(448.7cm)
126.2(320.5cm)
75.7(192.3cm)
25.2 (64.1cm)Projector to screen distance
39.4(12.0m)29.5(9.0m)23.0(7.0m)16.4(5.0m)9.8(3.0m)3.3(1.0m) 

Page 17

Using Your Projector17
Using the Control Panel
Screen 
(Diagonal)Max.25.2 
(64.1cm)75.7 
(192.3cm)126.2 
(320.5cm)176.7 
(448.7cm)227.1 
(576.9cm)302.8 
(769.2cm)
Min.22.89 
(58.3cm)68.8 
(174.8cm)114.7 
(291.4cm)160.6 
(407.9cm)206.5 
(524.5cm)275.3 
(699.3cm)
Screen 
Size Max. 
(WxH)20.2X15.1 60.6 X45.4  101.0 X 75.7 141.3 X106  181.7 X 136.3 242.3 X 181.7 
(51.3cm X 
38.5cm)(153.8cm X 
115.4cm)(256.4cm X 
192.3cm)(359.0cm X 
269.2cm)(461.5cm X 
346.2cm)(615.4cmX 
461.5cm)
Min. 
(WxH)18.3 X 13.7  55.1...

Page 18

18Using Your Projector
2TEMP  warning light• A solid amber TEMP light indicates that the 
projector is overheated. The display 
automatically shuts down. Turn the display on 
again after the projector cools down. If the 
problem persists, contact Dell.
• A blinking amber TEMP light indicates that the 
projector fan has failed and the projector 
automatically shuts down. If the problem 
persists, contact Dell.
3Power  Turn the projector on and off. For more 
information, see Turning Your Projector On on...

Page 19

Using Your Projector19
Using the Remote Control
1Power  Turn the projector on and off. For more 
information, see Turning Your Projector On on 
page 13 and Turning Your Projector Off on 
page 13.
2Enter  Press to confirm the selection.
3Right  Press to adjust the OSD setting.
4Down  Press to select OSD items.
5Aspect Ratio Press to change aspect ratio of a displayed image.
6Page up  Press to move to previous page.
7Mute  Press to mute or un-mute the projector speaker.
1
2
3
4
5
6
7
8
9
19
20
20
18 17 16...

Page 20

20Using Your Projector
Using the On-Screen Display
The projector has a multi-language On-Screen Display (OSD) that can be 
displayed with or without an input source present. 
In the Main Menu, press   or   to navigate through the tabs. Press the Enter 
button 
 on the control panel or the remote control to select a submenu. 
In the submenu, press   or   to make a selection. When an item is selected, 8Page down  Press to move to next page.
9Video mode The Dell M209X Micro-projector has preset...
Start reading Dell M209X Projector Users Guide

Related Manuals for Dell M209X Projector Users Guide

All Dell manuals