dell latitude v700 User Manual
Here you can view all the pages of manual dell latitude v700 User Manual. The Dell manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 21
Keyboard : Dell Latitude V700 Service Manual 5. Lift the right end of the keyboard, and slide it slightly to the right t\ o disengage the tabs at the left end. 6. Pivot the keyboard and balance it upright on the left side of the comput\ er. file:///F|/Service%20Manuals/Dell/Latitude/v700/keyboard.htm (3 of 5) \ [2/28/2004 8:20:08 AM]
Page 22
Keyboard : Dell Latitude V700 Service Manual 7. Disconnect the keyboard flex cable and lay the keyboard aside. Replacing the Keyboard NOTE: The cable connector the cable connector on the system board is outlined \ in white to help you orient. 1. While bracing the keyboard upright on its left end, connect the keyboard\ flex cable to the interface connector on the system board. NOTICE: Position the keyboard flex cable so that it is not pinched when you replace the keyboard in the bottom case...
Page 23
Keyboard : Dell Latitude V700 Service Manual 2. Insert the metal tabs at the left end of the keyboard under the edge of \ the bottom case assembly, and fit the keyboard into place. 3. Check that the keyboard is correctly installed. The keys should be flush\ with the left and right surfaces of the palm rest. 4. Reinstall the four screws in the holes labeled K. Back to Contents Page file:///F|/Service%20Manuals/Dell/Latitude/v700/keyboard.htm (5 of 5) \ [2/28/2004 8:20:08 AM]
Page 24
Display : Dell Latitude V700 Service Manual Back to Contents Page Display Dell™ Latitude™ V700 Service Manual Display and Bezel Assembly Display Bezel and Panel Display Latch Display and Bezel Assembly file:///F|/Service%20Manuals/Dell/Latitude/v700/display.htm (1 of 12) \ [2/28/2004 8:20:09 AM]
Page 25
Display : Dell Latitude V700 Service Manual NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed battery. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface on the computer. Removing the Hinge Cover file:///F|/Service%20Manuals/Dell/Latitude/v700/display.htm (2 of 12) \ [2/28/2004 8:20:09 AM]
Page 26
Display : Dell Latitude V700 Service Manual 1. Follow the instructions in Preparing to Work Inside the Computer. 2. Use a nonmarring tool to loosen the hinge cover at the back and at each \ side of the computer. 3. Open the display and lift off the hinge cover. Removing the Display Assembly file:///F|/Service%20Manuals/Dell/Latitude/v700/display.htm (3 of 12) \ [2/28/2004 8:20:09 AM]
Page 27
Display : Dell Latitude V700 Service Manual 1. Remove the hinge cover. 2. Remove the M2.5 x 6-mm screw that secures the display flex cable to the \ strain relief, and then use the pull loop to remove the flex cable from the sys\ tem board. file:///F|/Service%20Manuals/Dell/Latitude/v700/display.htm (4 of 12) \ [2/28/2004 8:20:09 AM]
Page 28
Display : Dell Latitude V700 Service Manual NOTICE: When reconnecting the display flex cable, press down on both ends of the connector, not in the middle. Pressing the middle of the connector c\ an damage fragile components. 3. Open the display and remove the two screws (marked with a circle D) \ that secure the display assembly to the bottom case assembly. 4. With the display in an upright position, lift the display assembly from \ the bottom case assembly. Display Bezel and Panel Display...
Page 29
Display : Dell Latitude V700 Service Manual NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed battery. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface on the computer. file:///F|/Service%20Manuals/Dell/Latitude/v700/display.htm (6 of 12) \ [2/28/2004 8:20:09 AM]
Page 30
Display : Dell Latitude V700 Service Manual Removing the Display Bezel 1. Follow the instructions in Preparing to Work Inside the Computer. 2. Use a scribe to pry loose the four rubber screw covers located across th\ e top of the bezel. 3. Remove the four M2.5 x 4-mm screws located across the top of the bezel. \ 4. Use a scribe at the indentations to pry loose the plastic screw covers l\ ocated at the bottom of the bezel. 5. Remove the two M2.5 x 4-mm screws located at the bottom of the...