dell latitude d500 User Manual

							Memory Module, Mini PCI Card, and Devices: Dell Latitude D500 Service Ma\
nual
 
NOTICE: To prevent damage to the memory module connector, do not use 
tools to spread the securing clips that secure the memory module. 
3.  If you are replacing a memory module, remove the existing module. 
NOTICE: Handle memory modules by their edges, and do not touch the 
components on a module.  a.  Use your fingertips to carefully spread apart the securing clips on each\
 end  of the memory module connector until the module pops up. 
b.  Remove the module from the connector. 
file:///F|/Service%20Manuals/Dell/Latitude/d500/upgrades.htm (2 of 10)\
 [2/28/2004 8:08:21 AM] 
						

							Memory Module, Mini PCI Card, and Devices: Dell Latitude D500 Service Ma\
nual
 
NOTICE: If you need to install memory modules in two connectors, install a 
memory module in the connector labeled JDIM (Slot 1) before you inst\
all a 
module in the connector labeled JDIM2. 
4.  Ground yourself and install the new memory module:  a.  Align the notch in the module with the slot in the center of the connect\
or. 
b.  Slide the edge of the module firmly into the connector, and rotate the  module down until you feel a click. If you do not feel the click, remove\
 the 
module and reinstall it. 
NOTE: If the memory module is not installed properly, the computer does not 
boot. No error message indicates this failure. 
5.  Replace the cover and screw. 
NOTICE: If the memory module cover is difficult to close, remove the module 
and reinstall it. Forcing the cover to close may damage your computer. 
file:///F|/Service%20Manuals/Dell/Latitude/d500/upgrades.htm (3 of 10)\
 [2/28/2004 8:08:21 AM] 
						

							Memory Module, Mini PCI Card, and Devices: Dell Latitude D500 Service Ma\
nual
6.  Insert the battery into the battery bay, or connect the AC adapter to yo\
ur computer and an electrical outlet. 
7.  Turn on the computer. 
As the computer boots, it detects the additional memory and automaticall\
y updates 
the system configuration information.
Mini PCI Card
If you ordered a Mini PCI card at the same time that you ordered your co\
mputer, Dell 
has already installed the card for you.
  CAUTION: Before working inside your computer, read the safety 
instructions in your System Information Guide.
 CAUTION: To prevent static damage to components inside your 
computer, discharge static electricity from your body before you touch 
any of your computers electronic components. You can do so by 
touching an unpainted metal surface.
NOTICE: Handle components and cards by their edges, and avoid touching pins 
and contacts. 
1.  Follow the instructions in 
Preparing to Work Inside the Computer. 
2.  Turn the computer over, and loosen the captive screw on the Mini PCI car\
d  cover. 
file:///F|/Service%20Manuals/Dell/Latitude/d500/upgrades.htm (4 of 10)\
 [2/28/2004 8:08:21 AM] 
						

							Memory Module, Mini PCI Card, and Devices: Dell Latitude D500 Service Ma\
nual
 
3.  Place your finger under the cover at the indentation, lift up the cover,\
 and slide  the cover open. 
 
file:///F|/Service%20Manuals/Dell/Latitude/d500/upgrades.htm (5 of 10)\
 [2/28/2004 8:08:21 AM] 
						

							Memory Module, Mini PCI Card, and Devices: Dell Latitude D500 Service Ma\
nual
4.  If a Mini PCI card is not already installed, go to step 5. If you are replacing a 
Mini PCI card, remove the existing card: 
a.  Disconnect the Mini PCI card from any attached cables. 
NOTICE: To prevent damage to the memory module connector, do not use 
tools to spread the securing clips that secure the memory module. 
b.  Release the Mini PCI card by spreading the securing clips until the  card pops up slightly. 
c.  Lift the Mini PCI card out of its connector. 
5.  Slide the new Mini PCI card firmly into the connector, and rotate the mo\
dule  down until you feel a click. If you do not feel the click, remove the ca\
rd and 
reinstall it. 
6.  Connect the antenna cables from the Mini PCI card to the antenna connect\
ors on  the computer. 
 
file:///F|/Service%20Manuals/Dell/Latitude/d500/upgrades.htm (6 of 10)\
 [2/28/2004 8:08:21 AM] 
						

							Memory Module, Mini PCI Card, and Devices: Dell Latitude D500 Service Ma\
nual
1antenna cables
2 antenna connectors on card (2)
7.  Lower the Mini PCI card toward the inner tabs to approximately a 20-degr\
ee  angle. 
8.  Continue lowering the Mini PCI card until it snaps into the inner tabs o\
f the  connector. 
9.  Replace the cover. 
Devices
Your computer ships with an optical drive installed in the module bay. H\
owever, the 
device security screw is not installed in the optical drive but packaged\
 separately. 
When you install your device in the module bay, you can install the devi\
ce security 
screw.
NOTICE: Insert devices into the module bay before you dock and turn on the 
computer. 
NOTE: You do not need to install the device security screw unless you want to \
secure the module inside the computer for security purposes. 
If the Device Security Screw Is Not Installed 
NOTICE: To prevent damage to devices, place them in a safe, dry place when 
they are not installed in the computer. Avoid pressing down on them or p\
lacing 
heavy objects on top of them. 
1.  Press the device latch release so that the latch release pops out. 
file:///F|/Service%20Manuals/Dell/Latitude/d500/upgrades.htm (7 of 10)\
 [2/28/2004 8:08:21 AM] 
						

							Memory Module, Mini PCI Card, and Devices: Dell Latitude D500 Service Ma\
nual
 
1 device latch release
2.  Pull the device by the latch release to remove the device from the modul\
e bay. 
 
file:///F|/Service%20Manuals/Dell/Latitude/d500/upgrades.htm (8 of 10)\
 [2/28/2004 8:08:21 AM] 
						

							Memory Module, Mini PCI Card, and Devices: Dell Latitude D500 Service Ma\
nual
If the Device Security Screw Is Installed 
1.  If the computer is connected to a docking device (docked), undock it. \
See the documentation that came with your docking device for instructions. 
NOTICE: To prevent damage to devices, place them in a safe, dry place when 
they are not installed in the computer. Avoid pressing down on them or p\
lacing 
heavy objects on top of them. 
2.  Close the display and turn the computer over. 
3.  Use a #1 Phillips screwdriver to remove the M2 x 3-mm screw from the bot\
tom  of the computer. 
 
1 M2 x 3-mm screw
4.  Press the device latch release so that the latch release pops out. 
5.  Pull the device by the latch release to remove the device from the modul\
e bay. 
file:///F|/Service%20Manuals/Dell/Latitude/d500/upgrades.htm (9 of 10)\
 [2/28/2004 8:08:21 AM] 
						

							Memory Module, Mini PCI Card, and Devices: Dell Latitude D500 Service Ma\
nual
 
Back to Contents Page
 
file:///F|/Service%20Manuals/Dell/Latitude/d500/upgrades.htm (10 of 10)\
 [2/28/2004 8:08:21 AM] 
						

							System Components: Dell Latitude D500 Service Manual
Back to Contents Page 
System Components 
Dell™ Latitude™ D500 Service Manual
NOTICE: Only a certified service technician should perform repairs on your 
computer. Damage due to servicing that is not authorized by Dell is not \
covered 
by your warranty. 
NOTICE: Unless otherwise noted, each procedure in this document assumes 
that a part can be replaced by performing the removal procedure in rever\
se 
order. 
file:///F|/Service%20Manuals/Dell/Latitude/d500/system.htm (1 of 2) [2\
/28/2004 8:08:22 AM]