dell latitude d400 User Manual
Here you can view all the pages of manual dell latitude d400 User Manual. The Dell manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
Hard Drive:
interposer is attached correctly, four extra pins are on one side.
1 interposer 8267R
3. Install the
hard drive.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/d400/hdd.htm (5 of 5) [2/28\
/2004 8:06:13 AM]](http://img.usermanuals.tech/thumb/19/48092/w300_dell-latitude-d400-service-manual-40.png "Page 41
Hard Drive:
interposer is attached correctly, four extra pins are on one side.
1 interposer 8267R
3. Install the
hard drive.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/d400/hdd.htm (5 of 5) [2/28\
/2004 8:06:13 AM]")
Hard Drive: interposer is attached correctly, four extra pins are on one side. 1 interposer 8267R 3. Install the hard drive. Back to Contents Page file:///F|/Service%20Manuals/Dell/Latitude/d400/hdd.htm (5 of 5) [2/28\ /2004 8:06:13 AM]
Page 42
![Page 42
Docking Doors:
Back to Contents Page
Docking Doors
Removing the Docking Doors
Installing the Docking Doors
Removing the Docking Doors
CAUTION: Before performing the following procedures, read the safety
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (\
such as
the back panel) on the computer.
1. Follow the instructions in
Preparing to Work Inside...](http://img.usermanuals.tech/thumb/19/48092/w300_dell-latitude-d400-service-manual-41.png "Page 42
Docking Doors:
Back to Contents Page
Docking Doors
Removing the Docking Doors
Installing the Docking Doors
Removing the Docking Doors
CAUTION: Before performing the following procedures, read the safety
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (\
such as
the back panel) on the computer.
1. Follow the instructions in
Preparing to Work Inside...")
Docking Doors: Back to Contents Page Docking Doors Removing the Docking Doors Installing the Docking Doors Removing the Docking Doors CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (\ such as the back panel) on the computer. 1. Follow the instructions in Preparing to Work Inside...
Page 43
![Page 43
Docking Doors:
1 docking doors 8X516
Installing the Docking Doors
Slide the side of the docking doors with the spring over the longer post\
s.
file:///F|/Service%20Manuals/Dell/Latitude/d400/dockdoor.htm (2 of 3) \
[2/28/2004 8:06:14 AM]](http://img.usermanuals.tech/thumb/19/48092/w300_dell-latitude-d400-service-manual-42.png "Page 43
Docking Doors:
1 docking doors 8X516
Installing the Docking Doors
Slide the side of the docking doors with the spring over the longer post\
s.
file:///F|/Service%20Manuals/Dell/Latitude/d400/dockdoor.htm (2 of 3) \
[2/28/2004 8:06:14 AM]")
Docking Doors: 1 docking doors 8X516 Installing the Docking Doors Slide the side of the docking doors with the spring over the longer post\ s. file:///F|/Service%20Manuals/Dell/Latitude/d400/dockdoor.htm (2 of 3) \ [2/28/2004 8:06:14 AM]
Page 44
![Page 44
Docking Doors:
1 docking doors with spring 8X516
2 longer post
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/d400/dockdoor.htm (3 of 3) \
[2/28/2004 8:06:14 AM]](http://img.usermanuals.tech/thumb/19/48092/w300_dell-latitude-d400-service-manual-43.png "Page 44
Docking Doors:
1 docking doors with spring 8X516
2 longer post
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/d400/dockdoor.htm (3 of 3) \
[2/28/2004 8:06:14 AM]")
Docking Doors: 1 docking doors with spring 8X516 2 longer post Back to Contents Page file:///F|/Service%20Manuals/Dell/Latitude/d400/dockdoor.htm (3 of 3) \ [2/28/2004 8:06:14 AM]
Page 45
![Page 45
Bluetooth™:
Back to Contents Page
Bluetooth™
CAUTION: Before performing the following procedures, read the safety
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (\
such as
the back panel) on the computer.
1. Follow the instructions in
Preparing to Work Inside the Computer to remove
the battery and prepare the computer for work.
2. Turn the computer...](http://img.usermanuals.tech/thumb/19/48092/w300_dell-latitude-d400-service-manual-44.png "Page 45
Bluetooth™:
Back to Contents Page
Bluetooth™
CAUTION: Before performing the following procedures, read the safety
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (\
such as
the back panel) on the computer.
1. Follow the instructions in
Preparing to Work Inside the Computer to remove
the battery and prepare the computer for work.
2. Turn the computer...")
Bluetooth™: Back to Contents Page Bluetooth™ CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (\ such as the back panel) on the computer. 1. Follow the instructions in Preparing to Work Inside the Computer to remove the battery and prepare the computer for work. 2. Turn the computer...
Page 46
![Page 46
Bluetooth™:
2captive screw
3 battery bay
3. Remove the existing module: a. Pull the Bluetooth module out of the slot.
b. Disconnect the cable from the module.
1 Bluetooth connector
2 Bluetooth module (front) 2U381
4. Ensure that the front of the Bluetooth module (silver) is facing outwa\
rd, and connect the cable to the module.
5. Insert the module into the slot.
6. Replace the cover and tighten the captive screw.
file:///F|/Service%20Manuals/Dell/Latitude/d400/blue.htm (2 of 3)...](http://img.usermanuals.tech/thumb/19/48092/w300_dell-latitude-d400-service-manual-45.png "Page 46
Bluetooth™:
2captive screw
3 battery bay
3. Remove the existing module: a. Pull the Bluetooth module out of the slot.
b. Disconnect the cable from the module.
1 Bluetooth connector
2 Bluetooth module (front) 2U381
4. Ensure that the front of the Bluetooth module (silver) is facing outwa\
rd, and connect the cable to the module.
5. Insert the module into the slot.
6. Replace the cover and tighten the captive screw.
file:///F|/Service%20Manuals/Dell/Latitude/d400/blue.htm (2 of 3)...")
Bluetooth™: 2captive screw 3 battery bay 3. Remove the existing module: a. Pull the Bluetooth module out of the slot. b. Disconnect the cable from the module. 1 Bluetooth connector 2 Bluetooth module (front) 2U381 4. Ensure that the front of the Bluetooth module (silver) is facing outwa\ rd, and connect the cable to the module. 5. Insert the module into the slot. 6. Replace the cover and tighten the captive screw. file:///F|/Service%20Manuals/Dell/Latitude/d400/blue.htm (2 of 3)...
Page 47
![Page 47
Bluetooth™:
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/d400/blue.htm (3 of 3) [2/2\
8/2004 8:06:15 AM]](http://img.usermanuals.tech/thumb/19/48092/w300_dell-latitude-d400-service-manual-46.png "Page 47
Bluetooth™:
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/d400/blue.htm (3 of 3) [2/2\
8/2004 8:06:15 AM]")
Bluetooth™: Back to Contents Page file:///F|/Service%20Manuals/Dell/Latitude/d400/blue.htm (3 of 3) [2/2\ 8/2004 8:06:15 AM]
Page 48
![Page 48
Display:
Back to Contents Page
Display
Removing the Display Assembly
Replacing the Display Latch
Removing the Display Assembly
CAUTION: Before performing the following procedures, read the safety
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (\
such as
the back panel) on the computer.
1. Follow the instructions in
Preparing to Work Inside the...](http://img.usermanuals.tech/thumb/19/48092/w300_dell-latitude-d400-service-manual-47.png "Page 48
Display:
Back to Contents Page
Display
Removing the Display Assembly
Replacing the Display Latch
Removing the Display Assembly
CAUTION: Before performing the following procedures, read the safety
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (\
such as
the back panel) on the computer.
1. Follow the instructions in
Preparing to Work Inside the...")
Display: Back to Contents Page Display Removing the Display Assembly Replacing the Display Latch Removing the Display Assembly CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (\ such as the back panel) on the computer. 1. Follow the instructions in Preparing to Work Inside the...
Page 49
![Page 49
Display:
1 display-feed flex cable
2 M2.5 x 6-mm screws (6) 4911U
3 display-feed flex cable hold-down board
4 pull-tab
6. Remove the two M2.5 x 6-mm screws from the display-feed flex cable hold-\
down board.
7. Use the pull-tab to disconnect the display-feed flex cable from its conn\
ector on the system board.
8. Move the display assembly to an upright position and pull it up out of t\
he computer.
Replacing the Display Latch
file:///F|/Service%20Manuals/Dell/Latitude/d400/display.htm...](http://img.usermanuals.tech/thumb/19/48092/w300_dell-latitude-d400-service-manual-48.png "Page 49
Display:
1 display-feed flex cable
2 M2.5 x 6-mm screws (6) 4911U
3 display-feed flex cable hold-down board
4 pull-tab
6. Remove the two M2.5 x 6-mm screws from the display-feed flex cable hold-\
down board.
7. Use the pull-tab to disconnect the display-feed flex cable from its conn\
ector on the system board.
8. Move the display assembly to an upright position and pull it up out of t\
he computer.
Replacing the Display Latch
file:///F|/Service%20Manuals/Dell/Latitude/d400/display.htm...")
Display: 1 display-feed flex cable 2 M2.5 x 6-mm screws (6) 4911U 3 display-feed flex cable hold-down board 4 pull-tab 6. Remove the two M2.5 x 6-mm screws from the display-feed flex cable hold-\ down board. 7. Use the pull-tab to disconnect the display-feed flex cable from its conn\ ector on the system board. 8. Move the display assembly to an upright position and pull it up out of t\ he computer. Replacing the Display Latch file:///F|/Service%20Manuals/Dell/Latitude/d400/display.htm...
Page 50
![Page 50
Display:
CAUTION: Before performing the following procedures, read the safety
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (\
such as
the back panel) on the computer.
To replace the display latch, you must remove the whole bezel. 1. Follow the instructions in
Preparing to Work Inside the Computer.
2. Remove the
hard drive.
3. Remove the...](http://img.usermanuals.tech/thumb/19/48092/w300_dell-latitude-d400-service-manual-49.png "Page 50
Display:
CAUTION: Before performing the following procedures, read the safety
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (\
such as
the back panel) on the computer.
To replace the display latch, you must remove the whole bezel. 1. Follow the instructions in
Preparing to Work Inside the Computer.
2. Remove the
hard drive.
3. Remove the...")
Display: CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (\ such as the back panel) on the computer. To replace the display latch, you must remove the whole bezel. 1. Follow the instructions in Preparing to Work Inside the Computer. 2. Remove the hard drive. 3. Remove the...