dell latitude c800 User Manual
Have a look at the manual dell latitude c800 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Removing and Replacing Parts : Dell Latitude C800/C805 Service Manual down into its connector. LED Board NOTICE: Disconnect the computer and attached devices from electrical outlets and\ remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer. LED Board file:///F|/Service%20Manuals/Dell/Latitude/c800/ch2.htm (44 of 49) [2/\ 28/2004 8:00:16 AM]
Removing and Replacing Parts : Dell Latitude C800/C805 Service Manual Removing the LED Board 1. Follow the instructions in Preparing to Work Inside the Computer. 2. Remove the hinge cover. 3. Remove the two 4-mm screws. 4. Lift the LED board away from its connector. Replacing the LED Board 1. Align the two screw holes with the two mounting holes on the bottom \ case assembly, and press the board into its connector. 2. Replace the two 4-mm screws. Fan Assembly NOTICE: Disconnect the computer and attached devices from electrical outlets and\ remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer. Fan Assembly file:///F|/Service%20Manuals/Dell/Latitude/c800/ch2.htm (45 of 49) [2/\ 28/2004 8:00:16 AM]
Removing and Replacing Parts : Dell Latitude C800/C805 Service Manual Removing the Fan Assembly 1. Follow the instructions in Preparing to Work Inside the Computer. 2. Remove the system board. 3. Remove the three 4-mm screws from the fan assembly. 4. Disconnect the two fan cables from the system board. 5. Pull the fan assembly away from the back-panel bracket. NOTICE: When reconnecting the fan cables, connect the shorter cable to the connector closest to the fan assembly. Route both cables so that they wi\ ll not be pinched by the thermal cooling assembly. RJ-11/RJ-45 Board file:///F|/Service%20Manuals/Dell/Latitude/c800/ch2.htm (46 of 49) [2/\ 28/2004 8:00:16 AM]
Removing and Replacing Parts : Dell Latitude C800/C805 Service Manual NOTICE: Disconnect the computer and attached devices from electrical outlets and\ remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching unpainted metal on the computer. RJ-11 and RJ-45 Connector Covers Removing the Protective Covers From the RJ-11 and RJ-45 Connectors Remove a plastic connector cover (if necessary) by slipping a nonmarri\ ng tool into the cutout at the top and pivoting the tool up to disengage the inner securi\ ng tab. To replace a connector cover, orient the cover notch-side-up and snap it\ into the connector cutout. RJ-11/RJ-45 Board file:///F|/Service%20Manuals/Dell/Latitude/c800/ch2.htm (47 of 49) [2/\ 28/2004 8:00:16 AM]
Removing and Replacing Parts : Dell Latitude C800/C805 Service Manual Removing the RJ-11/RJ-45 Board 1. Follow the instructions in Preparing to Work Inside the Computer. 2. Remove the system board. 3. Remove the 4-mm screw from the RJ-11/RJ-45 board. NOTICE: The plastic tab is fragile; pull it back only far enough to remove the b\ oard assembly. 4. Reach into the enclosure and, while pulling the tall plastic tab awa\ y from the board assembly to release it, lift out the assembly. When replacing the RJ-11/RJ-45 board assembly, protect the wiring harnes\ s by routing it between the plastic posts. RJ-11/RJ-45 Board Harness Routing file:///F|/Service%20Manuals/Dell/Latitude/c800/ch2.htm (48 of 49) [2/\ 28/2004 8:00:16 AM]
Removing and Replacing Parts : Dell Latitude C800/C805 Service Manual Back to Contents Page file:///F|/Service%20Manuals/Dell/Latitude/c800/ch2.htm (49 of 49) [2/\ 28/2004 8:00:16 AM]