dell latitude c400 User Manual
Here you can view all the pages of manual dell latitude c400 User Manual. The Dell manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 41
Cooling Fan : Dell Latitude C400 Service Manual 1 cooling fan 2 M2.5 x 6-mm screws (3) 3 fan cable 4 fan extender cable 5. Remove the fan cable from the fan extender cable that runs under the sys\ tem board. 6. Remove the three M2.5 x 6-mm screws that secure the cooling fan. 7. Lift out the cooling fan. Back to Contents Page file:///F|/Service%20Manuals/Dell/Latitude/c400/fan.htm (2 of 3) [2/28\ /2004 7:51:03 AM]
Page 42
Cooling Fan : Dell Latitude C400 Service Manual file:///F|/Service%20Manuals/Dell/Latitude/c400/fan.htm (3 of 3) [2/28\ /2004 7:51:03 AM]
Page 43
Reserve Battery : Dell Latitude C400 Service Manual Back to Contents Page Reserve Battery Dell™ Latitude™ C400 Service Manual Removing the Reserve Battery Replacing the Reserve Battery Removing the Reserve Battery NOTICE: The reserve battery provides power to the computers RTC and NVRAM when the computer is turned off. Removing the battery causes the computer to lose the date and time information as well as all user-speci\ fied parameters in the BIOS. If possible, make a copy of this...
Page 44
Reserve Battery : Dell Latitude C400 Service Manual 1 reserve battery connector on system board 2 reserve battery cable 3 reserve battery 5. Disconnect the reserve battery cable from the system board connector. 6. Pry the reserve battery free from the system board. The reserve battery \ is attached to the system board with a piece of adhesive tape. 7. Remove any remnants of the adhesive tape from the system board. Replacing the Reserve Battery...
Page 45
Reserve Battery : Dell Latitude C400 Service Manual 1. Connect the reserve battery cable to the system board connector. 2. Press the reserve battery into place on the system board. 3. Update the BIOS using a flash BIOS update program floppy disk or CD. For\ instructions on how to flash the BIOS, see Flashing the BIOS. Back to Contents Page file:///F|/Service%20Manuals/Dell/Latitude/c400/rsrvbatt.htm (3 of 3) \ [2/28/2004 7:51:04 AM]
Page 46
Flashing the BIOS : Dell Latitude C400 Service Manual Back to Contents Page Flashing the BIOS Dell™ Latitude™ C400 Service Manual Perform the following steps to update the BIOS:1. Make sure that the AC adapter is plugged in and that the main battery is\ installed properly. 2. Turn on the computer. The following error message appears: System hardware failures: #0010 Strike the F1 key to shutdown 3. Instead of pressing , insert the Flash BIOS update floppy disk or CD\ into the appropriate...
Page 47
Flashing the BIOS : Dell Latitude C400 Service Manual Back to Contents Page file:///F|/Service%20Manuals/Dell/Latitude/c400/bios.htm (2 of 2) [2/2\ 8/2004 7:51:04 AM]
Page 48
Audio Board : Dell Latitude C400 Service Manual Back to Contents Page Audio Board Dell™ Latitude™ C400 Service Manual Removing the Audio Board Replacing the Audio Board Removing the Audio Board NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read Preparing to Work Inside the Computer...
Page 49
Audio Board : Dell Latitude C400 Service Manual 1 M2 x 4-mm screws (2) 2 audio board shield 3 audio board 5. Remove the two M2 x 4-mm screws from the audio board shield, and remove \ the shield. 6. Pull the audio board up out of its connector. file:///F|/Service%20Manuals/Dell/Latitude/c400/audio_bd.htm (2 of 3) \ [2/28/2004 7:51:05 AM]
Page 50
Audio Board : Dell Latitude C400 Service Manual Replacing the Audio Board The audio board can be easily misaligned. When replacing it, first align\ the two screw holes in the board with the holes in the bosses. Then, as you press the \ audio board into the connector, sight sideways between the audio board and the syste\ m board to ensure that all pins on the audio board connector are headed correctly i\ nto the system board connector. Back to Contents Page...